RIOT-OS/RIOT
RIOT-OS/RIOT
1
0
Fork 0
mirror of https://github.com/RIOT-OS/RIOT.git synced 2024-12-29 04:50:03 +01:00
Code Releases Activity
bab54f37b6
RIOT/boards/stm32f469i-disco/include/periph_conf.h
MrKevinWeiss 17cce015d4
treewide/stm32: Make CLOCK_HS* configurable
2022-11-03 11:37:28 +01:00

272 lines
6.8 KiB
C
Raw Blame History

/*
* Copyright (C) 2021 luisan00
*
* This file is subject to the terms and conditions of the GNU Lesser General
* Public License v2.1. See the file LICENSE in the top level directory for more
* details.
*/
/**
* @ingroup boards_stm32f469i-disco
* @{
* @file
* @brief Peripheral MCU configuration for the STM32F469I-DISCO
* @author Luis A. Ruiz <luisan00@hotmail.com>
*/
#ifndef PERIPH_CONF_H
#define PERIPH_CONF_H
/* This board provides a LSE, marked as X3 on the board */
#ifndef CONFIG_BOARD_HAS_LSE
#define CONFIG_BOARD_HAS_LSE 1
#endif
/* This board provides a HSE, marked as X2 on the board */
#ifndef CONFIG_BOARD_HAS_HSE
#define CONFIG_BOARD_HAS_HSE 1
#endif
/* The HSE provides a 8MHz clock */
#ifndef CONFIG_CLOCK_HSE
#define CONFIG_CLOCK_HSE MHZ(8)
#endif
#include "periph_cpu.h"
#include "clk_conf.h"
#include "cfg_rtt_default.h"
#include "cfg_timer_tim2.h"
#include "cfg_usb_otg_fs.h"
#ifdef __cplusplus
extern "C"
{
#endif
/**
* @name DMA streams configuration
* @{
*/
static const dma_conf_t dma_config[] = {
{.stream = 14}, /* DMA2 Stream 6 - SPI TX */
{.stream = 13}, /* DMA2 Stream 5 - SPI RX */
};
#define DMA_0_ISR isr_dma2_stream6
#define DMA_1_ISR isr_dma2_stream5
#define DMA_NUMOF ARRAY_SIZE(dma_config)
/** @} */
/**
* @name UART configuration
* UART_DEV(0): Is used as Virtual Com Port for the STLINK, not available pyshically
* UART_DEV(1): Available on CN12 and Arduino(R) expansion connector CN7
* @{
*/
static const uart_conf_t uart_config[] = {
{
.dev = USART3,
.rcc_mask = RCC_APB1ENR_USART3EN,
.rx_pin = GPIO_PIN(PORT_B, 11),
.tx_pin = GPIO_PIN(PORT_B, 10),
.rx_af = GPIO_AF7,
.tx_af = GPIO_AF7,
.bus = APB1,
.irqn = USART3_IRQn,
#ifdef MODULE_PERIPH_DMA
.dma = DMA_STREAM_UNDEF,
.dma_chan = UINT8_MAX
#endif
},
{
.dev = USART6,
.rcc_mask = RCC_APB2ENR_USART6EN,
.rx_pin = GPIO_PIN(PORT_C, 7),
.tx_pin = GPIO_PIN(PORT_C, 6),
.rx_af = GPIO_AF8,
.tx_af = GPIO_AF8,
.bus = APB2,
.irqn = USART6_IRQn,
#ifdef MODULE_PERIPH_DMA
.dma = DMA_STREAM_UNDEF,
.dma_chan = UINT8_MAX
#endif
},
};
#define UART_0_ISR (isr_usart3)
#define UART_1_ISR (isr_usart6)
#define UART_NUMOF ARRAY_SIZE(uart_config)
/** @} */
/**
* @name I2C configuration
*
* DEV_I2C(0): Available on the connector CN11
* and the Arduino(R) connector CN5 ONLY if we have the next configuration
* on the solder bridges; open SB10 and SB12, close SB9 and SB11.
* For more information see the user manual.
*
* DEV_I2C(1): Is not physically available but
* it's used for the audio DAC-SAI, with address 0x94
* @{
*/
static const i2c_conf_t i2c_config[] = {
{
.dev = I2C1,
.speed = I2C_SPEED_NORMAL,
.scl_pin = GPIO_PIN(PORT_B, 8),
.sda_pin = GPIO_PIN(PORT_B, 9),
.scl_af = GPIO_AF4,
.sda_af = GPIO_AF4,
.bus = APB1,
.rcc_mask = RCC_APB1ENR_I2C1EN,
.clk = CLOCK_APB1,
.irqn = I2C1_EV_IRQn,
},
{
.dev = I2C2,
.speed = I2C_SPEED_NORMAL,
.scl_pin = GPIO_PIN(PORT_H, 4),
.sda_pin = GPIO_PIN(PORT_H, 5),
.scl_af = GPIO_AF4,
.sda_af = GPIO_AF4,
.bus = APB1,
.rcc_mask = RCC_APB1ENR_I2C2EN,
.clk = CLOCK_APB1,
.irqn = I2C2_EV_IRQn,
},
};
#define I2C_0_ISR isr_i2c1_ev
#define I2C_1_ISR isr_i2c2_ev
#define I2C_NUMOF ARRAY_SIZE(i2c_config)
/** @}*/
/**
* @name SPI configuration
* @{
*/
static const spi_conf_t spi_config[] = {
{
.dev = SPI2,
.mosi_pin = GPIO_PIN(PORT_B, 15),
.miso_pin = GPIO_PIN(PORT_B, 14),
.sclk_pin = GPIO_PIN(PORT_D, 3),
.cs_pin = GPIO_PIN(PORT_H, 6),
.mosi_af = GPIO_AF5,
.miso_af = GPIO_AF5,
.sclk_af = GPIO_AF5,
.cs_af = GPIO_AF5,
.rccmask = RCC_APB1ENR_I2C2EN,
.apbbus = APB1,
#ifdef MODULE_PERIPH_DMA
.tx_dma = 0,
.tx_dma_chan = 6,
.rx_dma = 1,
.rx_dma_chan = 6,
#endif
},
};
#define SPI_NUMOF ARRAY_SIZE(spi_config)
/** @} */
/**
* @name PWM configuration
* @{
*/
static const pwm_conf_t pwm_config[] = {
{
.dev = TIM3,
.rcc_mask = RCC_APB1ENR_TIM3EN,
.chan = {
{.pin = GPIO_PIN(PORT_A, 6), .cc_chan = 0}, /* D6 */
{.pin = GPIO_PIN(PORT_B, 5), .cc_chan = 1}, /* CN12-P9 */
{.pin = GPIO_UNDEF, .cc_chan = 0}, /* unused */
{.pin = GPIO_UNDEF, .cc_chan = 0}, /* unused */
},
.af = GPIO_AF2,
.bus = APB1,
},
{
.dev = TIM5,
.rcc_mask = RCC_APB1ENR_TIM5EN,
.chan = {
{.pin = GPIO_PIN(PORT_A, 1), .cc_chan = 1}, /* D5 */
{.pin = GPIO_PIN(PORT_A, 2), .cc_chan = 2}, /* D3 */
{.pin = GPIO_UNDEF, .cc_chan = 0}, /* unused */
{.pin = GPIO_UNDEF, .cc_chan = 0}, /* unused */
},
.af = GPIO_AF2,
.bus = APB1,
},
{
.dev = TIM12,
.rcc_mask = RCC_APB1ENR_TIM12EN,
.chan = {
{.pin = GPIO_PIN(PORT_H, 6), .cc_chan = 0}, /* D10 */
{.pin = GPIO_PIN(PORT_B, 15), .cc_chan = 1}, /* D11 */
{.pin = GPIO_UNDEF, .cc_chan = 0}, /* unused */
{.pin = GPIO_UNDEF, .cc_chan = 0}, /* unused */
},
.af = GPIO_AF9,
.bus = APB1,
},
{
.dev = TIM14,
.rcc_mask = RCC_APB1ENR_TIM14EN,
.chan = {
{.pin = GPIO_PIN(PORT_A, 7), .cc_chan = 0}, /* D9 */
{.pin = GPIO_UNDEF, .cc_chan = 0}, /* unused */
{.pin = GPIO_UNDEF, .cc_chan = 0}, /* unused */
{.pin = GPIO_UNDEF, .cc_chan = 0}, /* unused */
},
.af = GPIO_AF9,
.bus = APB1,
},
};
#define PWM_NUMOF ARRAY_SIZE(pwm_config)
/** @} */
/**
* @name ADC configuration
*
* Not all ADCs are configured, by now, only the 6 ones available
* on the Arduino(R) connector A0-A5 and internal VBAT ADC channel.
* @{
*/
static const adc_conf_t adc_config[] = {
{GPIO_PIN(PORT_B, 1), 2, 9},
{GPIO_PIN(PORT_C, 2), 2, 12},
{GPIO_PIN(PORT_C, 3), 2, 13},
{GPIO_PIN(PORT_C, 4), 2, 14},
{GPIO_PIN(PORT_C, 5), 2, 15},
{GPIO_PIN(PORT_A, 4), 2, 4},
{GPIO_UNDEF, 0, 18}, /* VBAT */
};
#define VBAT_ADC ADC_LINE(6) /**< VBAT ADC line */
#define ADC_NUMOF ARRAY_SIZE(adc_config)
/** @} */
/**
* @brief DAC configuration
* @{
*/
static const dac_conf_t dac_config[] = {
{GPIO_PIN(PORT_A, 4), .chan = 0},
{GPIO_PIN(PORT_A, 5), .chan = 1},
};
/** @}*/
/**
* @brief Number of DACs
* @{
*/
#define DAC_NUMOF ARRAY_SIZE(dac_config)
/** @} */
#ifdef __cplusplus
}
#endif
#endif /* PERIPH_CONF_H */
/** @} */
View Git Blame Copy Permalink