mirror of
https://github.com/RIOT-OS/RIOT.git
synced 2024-12-29 04:50:03 +01:00
65 lines
2.5 KiB
Makefile
65 lines
2.5 KiB
Makefile
# name of your application
|
|
APPLICATION = gnrc_networking_mac
|
|
|
|
# If no BOARD is found in the environment, use this default:
|
|
BOARD ?= samr21-xpro
|
|
|
|
# Currently, GoMacH has only been tested and evaluated through on samr21-xpro, iotlab-m3 and
|
|
# derfmega256 (at86rf2xx based radios).
|
|
# Once GoMacH has also been tested through on other boards, the whitelist should be
|
|
# then accordingly extended.
|
|
# Notably, for LWMAC, we have only evaluated it on samr21-xpro nodes. To this end, if
|
|
# you are going to include LWMAC for testing, you should only run the example on samr21-xpro.
|
|
BOARD_WHITELIST := samr21-xpro iotlab-m3 avr-rss2 atmega256rfr2-xpro derfmega256
|
|
|
|
# This has to be the absolute path to the RIOT base directory:
|
|
RIOTBASE ?= $(CURDIR)/../..
|
|
|
|
# Include packages that pull up and auto-init the link layer.
|
|
# NOTE: 6LoWPAN will be included if IEEE802.15.4 devices are present
|
|
USEMODULE += netdev_default
|
|
USEMODULE += auto_init_gnrc_netif
|
|
# Specify the mandatory networking modules for IPv6 and UDP
|
|
USEMODULE += gnrc_ipv6_router_default
|
|
USEMODULE += gnrc_udp
|
|
# Add a routing protocol
|
|
USEMODULE += gnrc_rpl
|
|
USEMODULE += auto_init_gnrc_rpl
|
|
# This application dumps received packets to STDIO using the pktdump module
|
|
USEMODULE += gnrc_pktdump
|
|
# Additional networking modules that can be dropped if not needed
|
|
USEMODULE += gnrc_icmpv6_echo
|
|
# Add also the shell, some shell commands
|
|
USEMODULE += shell_cmds_default
|
|
USEMODULE += ps
|
|
USEMODULE += netstats_l2
|
|
USEMODULE += netstats_ipv6
|
|
USEMODULE += netstats_rpl
|
|
# Use GoMacH as the MAC layer protocol
|
|
USEMODULE += gnrc_gomach
|
|
# In case of using LWMAC MAC protocol instead of GoMacH, uncomment the following line and comment the above line
|
|
# USEMODULE += gnrc_lwmac
|
|
|
|
# Comment this out to disable code in RIOT that does safety checking
|
|
# which is not needed in a production environment but helps in the
|
|
# development process:
|
|
DEVELHELP ?= 1
|
|
|
|
# Uncomment the following 2 lines to specify static link lokal IPv6 address
|
|
# this might be useful for testing, in cases where you cannot or do not want to
|
|
# run a shell with ifconfig to get the real link lokal address.
|
|
#IPV6_STATIC_LLADDR ?= '"fe80::cafe:cafe:cafe:1"'
|
|
#CFLAGS += -DCONFIG_GNRC_IPV6_STATIC_LLADDR=$(IPV6_STATIC_LLADDR)
|
|
|
|
# Uncomment this to join RPL DODAGs even if DIOs do not contain
|
|
# DODAG Configuration Options (see the doc for more info)
|
|
# CFLAGS += -DCONFIG_GNRC_RPL_DODAG_CONF_OPTIONAL_ON_JOIN
|
|
|
|
# Change this to 0 show compiler invocation lines by default:
|
|
QUIET ?= 1
|
|
|
|
include $(RIOTBASE)/Makefile.include
|
|
|
|
# Set a custom channel if needed
|
|
include $(RIOTMAKE)/default-radio-settings.inc.mk
|