RIOT-OS/RIOT
RIOT-OS/RIOT
1
0
Fork 0
mirror of https://github.com/RIOT-OS/RIOT.git synced 2024-12-29 04:50:03 +01:00
Code Releases Activity
af89824cfd
RIOT/drivers/include/ata8520e.h

244 lines
8.3 KiB
C
Raw Blame History

/*
* Copyright (C) 2017 Inria
*
* This file is subject to the terms and conditions of the GNU Lesser General
* Public License v2.1. See the file LICENSE in the top level directory for more
* details.
*/
/**
* @defgroup drivers_ata8520e Microchip ATA8520E transceiver
* @ingroup drivers_netdev
* @brief Device driver for Microchip ATA8520E transceiver (Sigfox)
*
* For more information, please refer to the datasheet
* http://ww1.microchip.com/downloads/en/DeviceDoc/Atmel-9409-Smart-RF-ATA8520E_Datasheet.pdf
*
* @{
*
* @file
* @brief Device driver for Microchip ATA8520E transceiver (Sigfox)
*
* @author Alexandre Abadie <alexandre.abadie@inria.fr>
*/
#ifndef ATA8520E_H
#define ATA8520E_H
#include <stdint.h>
#include <inttypes.h>
#include "mutex.h"
#include "periph/gpio.h"
#include "periph/spi.h"
#ifdef __cplusplus
extern "C" {
#endif
/**
* @name SIGFOX constants
* @{
*/
#define SIGFOX_PAC_LENGTH (16U) /**< Length of Sigfox PAC */
#define SIGFOX_ID_LENGTH (8U) /**< Length of Sigfox ID */
#define SIGFOX_MAX_TX_LENGTH (12U) /**< Maximum length of a TX payload */
#define SIGFOX_RX_LENGTH (8U) /**< RX payload length is always 8 */
/** @} */
/**
* @brief return codes
*/
enum {
ATA8520E_OK = 0, /**< Everything is fine */
ATA8520E_ERR_SPI, /**< An error occurred with SPI */
ATA8520E_ERR_GPIO_INT, /**< An error occurred with interrupt pin */
ATA8520E_ERR_GPIO_RESET, /**< An error occurred with reset pin */
ATA8520E_ERR_GPIO_POWER, /**< An error occurred with power pin */
ATA8520E_ERR_EVENT_TIMEOUT, /**< An expected event never happened */
};
/**
* @brief device internal states
*/
enum {
ATA8520E_STATE_IDLE, /**< Device is in idle state */
ATA8520E_STATE_INIT, /**< Device is in initialization phase */
ATA8520E_STATE_TX, /**< Device is in TX mode */
ATA8520E_STATE_RX, /**< Device is in RX mode, just after TX */
};
/**
* @brief device module status
*/
typedef enum {
ATA8520E_SSM, /**< SoC System Management status */
ATA8520E_ATMEL, /**< Atmel status */
ATA8520E_SIGFOX /**< Sigfox status */
} ata8520e_status_type_t;
/**
* @brief Sigfox statuses
*
* See ATA8520E datasheet, section 2.1.2.10, page 12
*/
typedef enum {
ATA8520E_ATMEL_OK, /**< No error */
ATA8520E_ATMEL_COMMAND_ERROR, /**< Command error / not supported */
ATA8520E_ATMEL_GENERIC_ERROR, /**< Generic error */
ATA8520E_ATMEL_FREQUENCY_ERROR, /**< Frequency error */
ATA8520E_ATMEL_USAGE_ERROR, /**< Usage error */
ATA8520E_ATMEL_OPENING_ERROR, /**< Opening error */
ATA8520E_ATMEL_CLOSING_ERROR, /**< Closing error */
ATA8520E_ATMEL_SEND_ERROR /**< Send error */
} ata8520e_atmel_status_t;
/**
* @brief Sigfox statuses.
*
* See ATA8520E datasheet, section 2.1.2.10, page 12
*/
typedef enum {
ATA8520E_SIGFOX_OK, /**< No error */
ATA8520E_SIGFOX_MANUFACTURER_ERROR, /**< Manufacturer error */
ATA8520E_SIGFOX_ID_OR_KEY_ERROR, /**< ID or key error */
ATA8520E_SIGFOX_STATE_MACHINE_ERROR, /**< State machine error */
ATA8520E_SIGFOX_FRAME_SIZE_ERROR, /**< Frame size error */
ATA8520E_SIGFOX_MANUFACTURER_SEND_ERROR, /**< Manufacturer send error */
ATA8520E_SIGFOX_GET_VOLTAGE_TEMP_ERROR, /**< Get voltage/temperature error */
ATA8520E_SIGFOX_CLOSE_ERROR, /**< Close issues encountered */
ATA8520E_SIGFOX_API_ERROR, /**< API error indication */
ATA8520E_SIGFOX_GET_PN9_ERROR, /**< Error getting PN9 */
ATA8520E_SIGFOX_GET_FREQUENCY_ERROR, /**< Error getting frequency */
ATA8520E_SIGFOX_BUILDING_FRAME_ERROR, /**< Error building frame */
ATA8520E_SIGFOX_DELAY_ROUTINE_ERROR, /**< Error in delay routine */
ATA8520E_SIGFOX_CALLBACK_ERROR, /**< Callback causes error */
ATA8520E_SIGFOX_TIMING_ERROR, /**< Timing error */
ATA8520E_SIGFOX_FREQUENCY_ERROR /**< Frequency error */
} ata8520e_sigfox_status_t;
/**
* @brief Initialization parameters
*/
typedef struct {
spi_t spi; /**< SPI device */
spi_clk_t spi_clk; /**< SPI clock speed */
gpio_t cs_pin; /**< Chip select pin */
gpio_t int_pin; /**< IRQ pin */
gpio_t power_pin; /**< Power pin */
gpio_t reset_pin; /**< Reset pin */
} ata8520e_params_t;
/**
* @brief device descriptor
*/
typedef struct {
ata8520e_params_t params; /**< Device parameters */
uint8_t internal_state; /**< current state of the device */
uint8_t event_received; /**< check if an event was received */
mutex_t event_lock; /**< mutex for waiting for event */
} ata8520e_t;
/**
* @brief Initialize the device
*
* This will also initialize the CS pin as a GPIO output, without pull resistors
* and the interrupt pin handler to manage events.
*
* @param[out] dev Pointer to device descriptor
* @param[in] params Pointer to SPI settings
*
* @return ATA8520E_OK on success
* @return -ATA8520E_ERR_SPI on SPI initialization error
* @return -ATA8520E_ERR_GPIO_INT on interrupt pin initialization error
* @return -ATA8520E_ERR_GPIO_RESET on reset pin initialization error
* @return -ATA8520E_ERR_GPIO_POWER on power pin initialization error
*/
int ata8520e_init(ata8520e_t *dev, const ata8520e_params_t *params);
/**
* @brief Perform a complete reset of the device
*
* @param[in] dev Pointer to device descriptor
*/
void ata8520e_system_reset(const ata8520e_t *dev);
/**
* @brief Return the Atmel version of the device
*
* @param[in] dev Pointer to device descriptor
* @param[out] version Pointer to the string containing the version, must
* be able to hold 2 characters
*/
void ata8520e_read_atmel_version(const ata8520e_t *dev, uint8_t *version);
/**
* @brief Return the Atmel version of the device
*
* @param[in] dev Pointer to device descriptor
* @param[out] version String containing the version, must be able to hold
* 11 characters
*/
void ata8520e_read_sigfox_version(const ata8520e_t *dev, char *version);
/**
* @brief Return the porting authorization code (PAC) available in the device
*
* @param[in] dev Pointer to device descriptor
* @param[out] pac String containing the pac, must be able to hold 17
* characters
*/
void ata8520e_read_pac(const ata8520e_t *dev, char *pac);
/**
* @brief Return the ID of the device
*
* @param[in] dev Pointer to device descriptor
* @param[out] id String containing the ID, must be able to hold 9
* characters
*/
void ata8520e_read_id(const ata8520e_t *dev, char *id);
/**
* @brief Send a frame
*
* @param[in] dev Pointer to device descriptor
* @param[in] payload The payload to send
* @param[in] payload_len The length of the payload to send
*
* @return ATA8520E_OK if the send was successful
* @return -ATA8520E_ERR_EVENT_TIMEOUT if the send failed
*/
int ata8520e_send_frame(ata8520e_t *dev, uint8_t *payload, uint8_t payload_len);
/**
* @brief Send a frame and wait for a RX packet
*
* @param[in] dev Pointer to device descriptor
* @param[in] payload The payload to send
* @param[in] payload_len The length of the payload to send
* @param[out] rx_payload The payload received
*
* @return ATA8520E_OK if the send was successful
* @return -ATA8520E_ERR_EVENT_TIMEOUT if the send failed
*/
int ata8520e_send_receive_frame(ata8520e_t *dev, uint8_t *payload,
uint8_t payload_len, uint8_t *rx_payload);
/**
* @brief Send a bit
*
* @param[in] dev Pointer to device descriptor
* @param[in] bit The bit to send
*
* @return ATA8520E_OK if the send was successful
* @return -ATA8520E_ERR_EVENT_TIMEOUT if the send failed
*/
int ata8520e_send_bit(ata8520e_t *dev, bool bit);
#ifdef __cplusplus
}
#endif
#endif /* ATA8520E_H */
/** @} */
View Git Blame Copy Permalink