Benjamin Valentin d35511bee7 drivers/at86rf215: Add basic driver for the AT86RF215 radio ... This adds a driver for the SPI based AT86RF215 transceiver. The chip supports the IEEE Std 802.15.4-2015 and IEEE Std 802.15.4g-2012 standard. This driver supports two versions of the chip: - AT86RF215: dual sub-GHz & 2.4 GHz radio & baseband - AT86RF215M: sub-GHz radio & baseband only Both radios support the following PHY modes: - MR-FSK - MR-OFDM - MR-O-QPKS - O-QPSK (legacy) The driver currently only implements support for legacy O-QPSK. To use both interfaces, add GNRC_NETIF_NUMOF := 2 to your Makefile. The transceiver is able to send frames of up to 2047 bytes according to IEEE 802.15.4g-2012 when operating in non-legacy mode. Known issues: - [ ] dBm setting values are bogus - [ ] Channel spacing for sub-GHz MR-O-QPSK might be wrong - [ ] TX/RX stress test will lock up the driver on openmote-b		2020-03-19 14:39:18 +01:00
..
at86rf215.h	drivers/at86rf215: Add basic driver for the AT86RF215 radio	2020-03-19 14:39:18 +01:00