mirror of
https://github.com/RIOT-OS/RIOT.git
synced 2024-12-29 04:50:03 +01:00
83 lines
2.8 KiB
Plaintext
83 lines
2.8 KiB
Plaintext
/**
|
|
@defgroup boards_samd20-xpro Atmel SAM D20 Xplained Pro
|
|
@ingroup boards
|
|
@brief Support for the Atmel SAM D20 Xplained Pro board.
|
|
|
|
## Overview
|
|
|
|
The `SAMD20 Xplained Pro` is an ultra-low power evaluation board by Atmel
|
|
featuring an ATSAMD20J18 SoC. The SoC includes a SAMD20 ARM Cortex-M0+ micro-
|
|
controller. For programming the MCU comes with 32Kb of RAM and 256Kb of flash
|
|
memory.
|
|
|
|
## Hardware
|
|
|
|
|
|
|
|
|
|
### MCU
|
|
| MCU | ATSAMD20J18A |
|
|
|:-------------- |:--------------------------------- |
|
|
| Family | ARM Cortex-M0+ |
|
|
| Vendor | Atmel |
|
|
| RAM | 32 KiB |
|
|
| Flash | 256 KiB |
|
|
| Frequency | up to 48MHz |
|
|
| FPU | no |
|
|
| Timers | 8 (16-bit) |
|
|
| ADCs | 1x 12-bit (20 channels) |
|
|
| UARTs | max 6 (shared with SPI and I2C) |
|
|
| SPIs | max 6 (see UART) |
|
|
| I2Cs | max 6 (see UART) |
|
|
| Vcc | 1.62V - 3.63V |
|
|
| Datasheet | [Datasheet](http://ww1.microchip.com/downloads/en/DeviceDoc/SAM_D20_%20Family_Datasheet_DS60001504C.pdf) |
|
|
| Board Manual | [Board Manual](http://ww1.microchip.com/downloads/en/DeviceDoc/Atmel-42102-SAMD20-Xplained-Pro_User-Guide.pdf)|
|
|
|
|
### User Interface
|
|
|
|
1 User button and 1 LED:
|
|
|
|
| Device | PIN |
|
|
|:------------- |:----- |
|
|
| LED0 | PA14 |
|
|
| SW0 (button) | PA15 |
|
|
|
|
## Flashing the device
|
|
|
|
Connect the device to your Micro-USB cable using the port labeled as *DEBUG
|
|
USB*.
|
|
|
|
The standard method for flashing RIOT to the samd20-xpro is using [edbg](https://github.com/ataradov/edbg).
|
|
by calling: `make BOARD=samd20-xpro -C tests/leds flash`
|
|
|
|
Note that on Linux, you will need libudev-dev package to be installed.
|
|
|
|
Users can also use openOCD to flash and/or debug the board using:
|
|
`PROGRAMMER=openocd make BOARD=samd20-xpro -C tests/leds flash`
|
|
|
|
On Linux you will have to add a **udev** rule for hidraw, like
|
|
```
|
|
bash
|
|
echo 'KERNEL=="hidraw*", SUBSYSTEM=="hidraw", MODE="0664", GROUP="plugdev"' \
|
|
| sudo tee -a /etc/udev/rules.d/99-usb.rules
|
|
sudo service udev restart
|
|
```
|
|
|
|
### Arch Linux
|
|
With yaourt:
|
|
```
|
|
yaourt -S libudev0
|
|
yaourt -S hidapi-git
|
|
yaourt -S openocd-git
|
|
# edit PKGBUILD, add "cmsis-dap hidapi-libusb" to "_features"
|
|
```
|
|
|
|
### Ubuntu
|
|
Although this refers to setting up the SAMR21, this guide is still very
|
|
helpful to understanding how to set up a solid RIOT development environment for
|
|
the SAMD20: http://watr.li/samr21-dev-setup-ubuntu.html
|
|
|
|
## Known Issues / Problems
|
|
|
|
*/
|