mirror of
https://github.com/RIOT-OS/RIOT.git
synced 2024-12-29 04:50:03 +01:00
64 lines
2.2 KiB
Plaintext
64 lines
2.2 KiB
Plaintext
/**
|
|
@defgroup boards_cc2650_launchpad TI CC2650 LaunchPad XL
|
|
@ingroup boards
|
|
@brief Texas Instruments SimpleLink(TM) CC2650 Wireless MCU LaunchPad(TM) Kit
|
|
|
|
## Overview
|
|
|
|
The [LAUNCHXL-CC2650](https://www.ti.com/tool/LAUNCHXL-CC2650) is a Texas
|
|
Instrument's development kit for the CC2650 SoC MCU which combines a Cortex-M3
|
|
microcontroller alonside a dedicated Cortex-M0 to control the radio.
|
|
|
|
## Hardware
|
|
|
|
|
|
|
|
| MCU | CC2650 |
|
|
|:----------------- |:--------------------- |
|
|
| Family | ARM Cortex-M3 |
|
|
| Vendor | Texas Instruments |
|
|
| RAM | 20KiB |
|
|
| Flash | 128KiB |
|
|
| Frequency | 48MHz |
|
|
| FPU | no |
|
|
| Timers | 4 |
|
|
| ADCs | 1x 12-bit (channels) |
|
|
| UARTs | 1 |
|
|
| SPIs | 2 |
|
|
| I2Cs | 1 |
|
|
| Vcc | 1.8V - 3.8V |
|
|
| Datasheet | [Datasheet](https://www.ti.com/lit/ds/symlink/cc2650.pdf) |
|
|
| Reference Manual | [Reference Manual](https://www.ti.com/lit/ug/swcu117i/swcu117i.pdf) |
|
|
|
|
## Board pinout
|
|
|
|
The [CC2650 Quick Start Guide](https://www.ti.com/lit/ml/swru451/swru451.pdf)
|
|
provides the default pinout for the board.
|
|
|
|
## Flashing the Device
|
|
|
|
Flashing RIOT is quite straight forward. The board comes with an XDS110 on-board
|
|
debug probe that provides programming, flashing and debugging capabilities
|
|
through the USB Micro-USB connector. Once either TI Uniflash or OpenOCD are
|
|
installed just connect the board using the Micro-USB port to your computer and
|
|
type:
|
|
|
|
```
|
|
make flash BOARD=cc2650-launchpad
|
|
```
|
|
|
|
To use OpenOCD instead of uniflash we need to set the `PROGRAMMER` environment
|
|
variable, this is to enable OpenOCD instead of Uniflash.
|
|
|
|
```
|
|
export PROGRAMMER=openocd
|
|
```
|
|
|
|
Now we can just do `make flash` and `make debug`, this all using OpenOCD.
|
|
|
|
For detailed information about CC2650 MCUs as well as configuring, compiling
|
|
RIOT and installation of flashing tools for CC2650 boards,
|
|
see \ref cc26xx_cc13xx_riot.
|
|
|
|
*/
|