mirror of
https://github.com/RIOT-OS/RIOT.git
synced 2024-12-29 04:50:03 +01:00
d37adee32d
There is no hardware limitation for custom boards based on STM32 to uses SPI bus with signals coming from different PORT and alternate functions. This patch allow alternate's function definition per pin basis, thus enable the support of SPI bus signals routed on differents PORT. Signed-off-by: Yannick Gicquel <ygicquel@gmail.com>
193 lines
4.6 KiB
C
193 lines
4.6 KiB
C
/*
|
|
* Copyright (C) 2016 Inria
|
|
*
|
|
* This file is subject to the terms and conditions of the GNU Lesser
|
|
* General Public License v2.1. See the file LICENSE in the top level
|
|
* directory for more details.
|
|
*/
|
|
|
|
/**
|
|
* @ingroup boards_stm32f030f4-demo
|
|
* @{
|
|
*
|
|
* @file
|
|
* @brief Peripheral MCU configuration for the stm32f030f4-demo board
|
|
*
|
|
* @author Hauke Petersen <hauke.petersen@fu-berlin.de>
|
|
* @author José Ignacio Alamos <jialamos@uc.cl>
|
|
* @author Alexandre Abadie <alexandre.abadie@inria.fr>
|
|
* @author Benjamin Valentin <benpicco@googlemail.com>
|
|
*/
|
|
|
|
#ifndef PERIPH_CONF_H
|
|
#define PERIPH_CONF_H
|
|
|
|
#include "periph_cpu.h"
|
|
|
|
#ifdef __cplusplus
|
|
extern "C" {
|
|
#endif
|
|
|
|
/**
|
|
* @name Clock settings
|
|
*
|
|
* @note This is auto-generated from
|
|
* `cpu/stm32_common/dist/clk_conf/clk_conf.c`
|
|
* @{
|
|
*/
|
|
/* give the target core clock (HCLK) frequency [in Hz],
|
|
* maximum: 48MHz */
|
|
#define CLOCK_CORECLOCK (48000000U)
|
|
/* 0: no external high speed crystal available
|
|
* else: actual crystal frequency [in Hz] */
|
|
#define CLOCK_HSE (8000000U)
|
|
/* 0: no external low speed crystal available,
|
|
* 1: external crystal available (always 32.768kHz) */
|
|
#define CLOCK_LSE (0)
|
|
/* peripheral clock setup */
|
|
#define CLOCK_AHB_DIV RCC_CFGR_HPRE_DIV1
|
|
#define CLOCK_AHB (CLOCK_CORECLOCK / 1)
|
|
#define CLOCK_APB1_DIV RCC_CFGR_PPRE_DIV1 /* max 48MHz */
|
|
#define CLOCK_APB1 (CLOCK_CORECLOCK / 1)
|
|
#define CLOCK_APB2 (CLOCK_APB1)
|
|
|
|
/* PLL factors */
|
|
#define CLOCK_PLL_PREDIV (1)
|
|
#define CLOCK_PLL_MUL (6)
|
|
/** @} */
|
|
|
|
/**
|
|
* @name Timer configuration
|
|
* @{
|
|
*/
|
|
static const timer_conf_t timer_config[] = {
|
|
{
|
|
.dev = TIM1,
|
|
.max = 0x0000ffff,
|
|
.rcc_mask = RCC_APB2ENR_TIM1EN,
|
|
.bus = APB2,
|
|
.irqn = TIM1_CC_IRQn
|
|
},
|
|
{
|
|
.dev = TIM3,
|
|
.max = 0x0000ffff,
|
|
.rcc_mask = RCC_APB1ENR_TIM3EN,
|
|
.bus = APB1,
|
|
.irqn = TIM3_IRQn
|
|
},
|
|
};
|
|
|
|
#define TIMER_0_ISR (isr_tim1_cc)
|
|
#define TIMER_1_ISR (isr_tim3)
|
|
|
|
#define TIMER_NUMOF ARRAY_SIZE(timer_config)
|
|
/** @} */
|
|
|
|
/**
|
|
* @name UART configuration
|
|
* @{
|
|
*/
|
|
static const uart_conf_t uart_config[] = {
|
|
{
|
|
.dev = USART1,
|
|
.rcc_mask = RCC_APB2ENR_USART1EN,
|
|
.rx_pin = GPIO_PIN(PORT_A, 10),
|
|
.tx_pin = GPIO_PIN(PORT_A, 9),
|
|
.rx_af = GPIO_AF1,
|
|
.tx_af = GPIO_AF1,
|
|
.bus = APB2,
|
|
.irqn = USART1_IRQn
|
|
}
|
|
};
|
|
|
|
#define UART_0_ISR (isr_usart1)
|
|
|
|
#define UART_NUMOF ARRAY_SIZE(uart_config)
|
|
/** @} */
|
|
|
|
/**
|
|
* @name PWM configuration
|
|
* @{
|
|
*/
|
|
static const pwm_conf_t pwm_config[] = {
|
|
{
|
|
.dev = TIM3,
|
|
.rcc_mask = RCC_APB1ENR_TIM3EN,
|
|
.chan = { { .pin = GPIO_PIN(PORT_A, 6), .cc_chan = 0},
|
|
{ .pin = GPIO_PIN(PORT_A, 7), .cc_chan = 1},
|
|
{ .pin = GPIO_UNDEF, .cc_chan = 0},
|
|
{ .pin = GPIO_UNDEF, .cc_chan = 0} },
|
|
.af = GPIO_AF1,
|
|
.bus = APB1
|
|
}
|
|
};
|
|
|
|
#define PWM_NUMOF ARRAY_SIZE(pwm_config)
|
|
/** @} */
|
|
|
|
/**
|
|
* @name SPI configuration
|
|
*
|
|
* @note The spi_divtable is auto-generated from
|
|
* `cpu/stm32_common/dist/spi_divtable/spi_divtable.c`
|
|
* @{
|
|
*/
|
|
static const uint8_t spi_divtable[2][5] = {
|
|
{ /* for APB1 @ 48000000Hz */
|
|
7, /* -> 187500Hz */
|
|
6, /* -> 375000Hz */
|
|
5, /* -> 750000Hz */
|
|
2, /* -> 6000000Hz */
|
|
1 /* -> 12000000Hz */
|
|
},
|
|
{ /* for APB2 @ 48000000Hz */
|
|
7, /* -> 187500Hz */
|
|
6, /* -> 375000Hz */
|
|
5, /* -> 750000Hz */
|
|
2, /* -> 6000000Hz */
|
|
1 /* -> 12000000Hz */
|
|
}
|
|
};
|
|
|
|
static const spi_conf_t spi_config[] = {
|
|
{
|
|
.dev = SPI1,
|
|
.mosi_pin = GPIO_PIN(PORT_A, 7),
|
|
.miso_pin = GPIO_PIN(PORT_A, 6),
|
|
.sclk_pin = GPIO_PIN(PORT_A, 5),
|
|
.cs_pin = GPIO_PIN(PORT_B, 1),
|
|
.mosi_af = GPIO_AF0,
|
|
.miso_af = GPIO_AF0,
|
|
.sclk_af = GPIO_AF0,
|
|
.cs_af = GPIO_AF0,
|
|
.rccmask = RCC_APB2ENR_SPI1EN,
|
|
.apbbus = APB2
|
|
},
|
|
};
|
|
|
|
#define SPI_NUMOF ARRAY_SIZE(spi_config)
|
|
/** @} */
|
|
|
|
/**
|
|
* @name ADC configuration
|
|
* @{
|
|
*/
|
|
#define ADC_CONFIG { \
|
|
{ GPIO_PIN(PORT_A, 0), 0 }, \
|
|
{ GPIO_PIN(PORT_A, 1), 1 }, \
|
|
{ GPIO_PIN(PORT_A, 2), 2 }, \
|
|
{ GPIO_PIN(PORT_A, 3), 3 }, \
|
|
{ GPIO_PIN(PORT_A, 4), 4 },\
|
|
{ GPIO_PIN(PORT_A, 5), 5 } \
|
|
}
|
|
|
|
#define ADC_NUMOF (6)
|
|
/** @} */
|
|
|
|
#ifdef __cplusplus
|
|
}
|
|
#endif
|
|
|
|
#endif /* PERIPH_CONF_H */
|
|
/** @} */
|