RIOT-OS/RIOT
RIOT-OS/RIOT
1
0
Fork 0
mirror of https://github.com/RIOT-OS/RIOT.git synced 2024-12-29 04:50:03 +01:00
Code Releases Activity
92f6fc6888
RIOT/cpu/sam0_common/periph/i2c.c
Hauke Petersen fcb1e68732 cpu/sam0: renamed sam21_common to sam0_common
2016-12-15 11:47:03 +01:00

497 lines
14 KiB
C
Raw Blame History

/*
* Copyright (C) 2014 CLENET Baptiste
*
* This file is subject to the terms and conditions of the GNU Lesser
* General Public License v2.1. See the file LICENSE in the top level
* directory for more details.
*/
/**
* @ingroup cpu_samd21
* @{
* @file
* @brief Low-level I2C driver implementation
* @author Baptiste Clenet <baptiste.clenet@xsoen.com>
* @author Thomas Eichinger <thomas.eichinger@fu-berlin.de>
* @}
*/
#include <stdint.h>
#include "cpu.h"
#include "board.h"
#include "mutex.h"
#include "periph_conf.h"
#include "periph/i2c.h"
#include "sched.h"
#include "thread.h"
#define ENABLE_DEBUG (0)
#include "debug.h"
/* guard file in case no I2C device is defined */
#if I2C_NUMOF
#define SAMD21_I2C_TIMEOUT (65535)
#define BUSSTATE_UNKNOWN SERCOM_I2CM_STATUS_BUSSTATE(0)
#define BUSSTATE_IDLE SERCOM_I2CM_STATUS_BUSSTATE(1)
#define BUSSTATE_OWNER SERCOM_I2CM_STATUS_BUSSTATE(2)
#define BUSSTATE_BUSY SERCOM_I2CM_STATUS_BUSSTATE(3)
/* static function definitions */
static void _i2c_poweron(SercomI2cm *sercom);
static void _i2c_poweroff(SercomI2cm *sercom);
static inline int _start(SercomI2cm *dev, uint8_t address, uint8_t rw_flag);
static inline int _write(SercomI2cm *dev, const uint8_t *data, int length);
static inline int _read(SercomI2cm *dev, uint8_t *data, int length);
static inline void _stop(SercomI2cm *dev);
/**
* @brief Array holding one pre-initialized mutex for each I2C device
*/
static mutex_t locks[] = {
#if I2C_0_EN
[I2C_0] = MUTEX_INIT,
#endif
#if I2C_1_EN
[I2C_1] = MUTEX_INIT,
#endif
#if I2C_2_EN
[I2C_2] = MUTEX_INIT
#endif
#if I2C_3_EN
[I2C_3] = MUTEX_INIT
#endif
};
int i2c_init_master(i2c_t dev, i2c_speed_t speed)
{
SercomI2cm *I2CSercom = 0;
gpio_t pin_scl = 0;
gpio_t pin_sda = 0;
gpio_mux_t mux;
uint32_t clock_source_speed = 0;
uint8_t sercom_gclk_id = 0;
uint8_t sercom_gclk_id_slow = 0;
uint32_t timeout_counter = 0;
int32_t tmp_baud;
switch (dev) {
#if I2C_0_EN
case I2C_0:
I2CSercom = &I2C_0_DEV;
pin_sda = I2C_0_SDA;
pin_scl = I2C_0_SCL;
mux = I2C_0_MUX;
clock_source_speed = CLOCK_CORECLOCK;
sercom_gclk_id = I2C_0_GCLK_ID;
sercom_gclk_id_slow = I2C_0_GCLK_ID_SLOW ;
break;
#endif
default:
DEBUG("I2C FALSE VALUE\n");
return -1;
}
/* DISABLE I2C MASTER */
i2c_poweroff(dev);
/* Reset I2C */
I2CSercom->CTRLA.reg = SERCOM_I2CS_CTRLA_SWRST;
while(I2CSercom->SYNCBUSY.reg & SERCOM_I2CM_SYNCBUSY_MASK) {}
/* Turn on power manager for sercom */
PM->APBCMASK.reg |= (PM_APBCMASK_SERCOM0 << (sercom_gclk_id - GCLK_CLKCTRL_ID_SERCOM0_CORE_Val));
/* I2C using CLK GEN 0 */
GCLK->CLKCTRL.reg = (GCLK_CLKCTRL_CLKEN |
GCLK_CLKCTRL_GEN_GCLK0 |
GCLK_CLKCTRL_ID(sercom_gclk_id));
while (GCLK->STATUS.bit.SYNCBUSY) {}
GCLK->CLKCTRL.reg = (GCLK_CLKCTRL_CLKEN |
GCLK_CLKCTRL_GEN_GCLK0 |
GCLK_CLKCTRL_ID(sercom_gclk_id_slow));
while (GCLK->STATUS.bit.SYNCBUSY) {}
/* Check if module is enabled. */
if (I2CSercom->CTRLA.reg & SERCOM_I2CM_CTRLA_ENABLE) {
DEBUG("STATUS_ERR_DENIED\n");
return -3;
}
/* Check if reset is in progress. */
if (I2CSercom->CTRLA.reg & SERCOM_I2CM_CTRLA_SWRST) {
DEBUG("STATUS_BUSY\n");
return -3;
}
/************ SERCOM PAD0 - SDA and SERCOM PAD1 - SCL *************/
gpio_init_mux(pin_sda, mux);
gpio_init_mux(pin_scl, mux);
/* I2C CONFIGURATION */
while(I2CSercom->SYNCBUSY.reg & SERCOM_I2CM_SYNCBUSY_MASK) {}
/* Set sercom module to operate in I2C master mode. */
I2CSercom->CTRLA.reg = SERCOM_I2CM_CTRLA_MODE_I2C_MASTER;
/* Enable Smart Mode (ACK is sent when DATA.DATA is read) */
I2CSercom->CTRLB.reg = SERCOM_I2CM_CTRLB_SMEN;
/* Find and set baudrate. Read speed configuration. Set transfer
* speed: SERCOM_I2CM_CTRLA_SPEED(0): Standard-mode (Sm) up to 100
* kHz and Fast-mode (Fm) up to 400 kHz */
switch (speed) {
case I2C_SPEED_NORMAL:
tmp_baud = (int32_t)(((clock_source_speed + (2*(100000)) - 1) / (2*(100000))) - 5);
if (tmp_baud < 255 && tmp_baud > 0) {
I2CSercom->CTRLA.reg |= SERCOM_I2CM_CTRLA_SPEED(0);
I2CSercom->BAUD.reg = SERCOM_I2CM_BAUD_BAUD(tmp_baud);
}
break;
case I2C_SPEED_FAST:
tmp_baud = (int32_t)(((clock_source_speed + (2*(400000)) - 1) / (2*(400000))) - 5);
if (tmp_baud < 255 && tmp_baud > 0) {
I2CSercom->CTRLA.reg |= SERCOM_I2CM_CTRLA_SPEED(0);
I2CSercom->BAUD.reg = SERCOM_I2CM_BAUD_BAUD(tmp_baud);
}
break;
case I2C_SPEED_HIGH:
tmp_baud = (int32_t)(((clock_source_speed + (2*(3400000)) - 1) / (2*(3400000))) - 1);
if (tmp_baud < 255 && tmp_baud > 0) {
I2CSercom->CTRLA.reg |= SERCOM_I2CM_CTRLA_SPEED(2);
I2CSercom->BAUD.reg =SERCOM_I2CM_BAUD_HSBAUD(tmp_baud);
}
break;
default:
DEBUG("BAD BAUDRATE\n");
return -2;
}
/* ENABLE I2C MASTER */
i2c_poweron(dev);
/* Start timeout if bus state is unknown. */
while ((I2CSercom->STATUS.reg & SERCOM_I2CM_STATUS_BUSSTATE_Msk) == BUSSTATE_UNKNOWN) {
if(timeout_counter++ >= SAMD21_I2C_TIMEOUT) {
/* Timeout, force bus state to idle. */
I2CSercom->STATUS.reg = BUSSTATE_IDLE;
}
}
return 0;
}
int i2c_acquire(i2c_t dev)
{
if (dev >= I2C_NUMOF) {
return -1;
}
mutex_lock(&locks[dev]);
return 0;
}
int i2c_release(i2c_t dev)
{
if (dev >= I2C_NUMOF) {
return -1;
}
mutex_unlock(&locks[dev]);
return 0;
}
int i2c_read_byte(i2c_t dev, uint8_t address, void *data)
{
return i2c_read_bytes(dev, address, data, 1);
}
int i2c_read_bytes(i2c_t dev, uint8_t address, void *data, int length)
{
SercomI2cm *i2c;
switch (dev) {
#if I2C_0_EN
case I2C_0:
i2c = &I2C_0_DEV;
break;
#endif
default:
return -1;
}
/* start transmission and send slave address */
if(_start(i2c, address, I2C_FLAG_READ) < 0) return 0;
/* read data to register */
if(_read(i2c, data, length) < 0) return 0;
_stop(i2c);
/* return number of bytes sent */
return length;
}
int i2c_read_reg(i2c_t dev, uint8_t address, uint8_t reg, void *data)
{
return i2c_read_regs(dev, address, reg, data, 1);
}
int i2c_read_regs(i2c_t dev, uint8_t address, uint8_t reg, void *data, int length)
{
SercomI2cm *i2c;
switch (dev) {
#if I2C_0_EN
case I2C_0:
i2c = &I2C_0_DEV;
break;
#endif
default:
return -1;
}
/* start transmission and send slave address */
if (_start(i2c, address, I2C_FLAG_WRITE) < 0) return 0;
/* send register address/command and wait for complete transfer to
* be finished */
if (_write(i2c, &reg, 1) < 0) return 0;
return i2c_read_bytes(dev, address, data, length);
}
int i2c_write_byte(i2c_t dev, uint8_t address, uint8_t data)
{
return i2c_write_bytes(dev, address, &data, 1);
}
int i2c_write_bytes(i2c_t dev, uint8_t address, const void *data, int length)
{
SercomI2cm *I2CSercom;
switch (dev) {
#if I2C_0_EN
case I2C_0:
I2CSercom = &I2C_0_DEV;
break;
#endif
default:
return -1;
}
if(_start(I2CSercom, address, I2C_FLAG_WRITE) < 0) return 0;
if(_write(I2CSercom, data, length) < 0) return 0;
_stop(I2CSercom);
return length;
}
int i2c_write_reg(i2c_t dev, uint8_t address, uint8_t reg, uint8_t data)
{
return i2c_write_regs(dev, address, reg, &data, 1);
}
int i2c_write_regs(i2c_t dev, uint8_t address, uint8_t reg, const void *data, int length)
{
SercomI2cm *i2c;
switch (dev) {
#if I2C_0_EN
case I2C_0:
i2c = &I2C_0_DEV;
break;
#endif
default:
return -1;
}
/* start transmission and send slave address */
if (_start(i2c, address, I2C_FLAG_WRITE) < 0) return 0;
/* send register address and wait for complete transfer to be finished */
if (_write(i2c, &reg, 1) < 0) return 0;
/* write data to register */
if (_write(i2c, data, length) < 0) return 0;
/* finish transfer */
_stop(i2c);
return length;
}
static void _i2c_poweron(SercomI2cm *sercom)
{
if (sercom == NULL) {
return;
}
sercom->CTRLA.bit.ENABLE = 1;
while (sercom->SYNCBUSY.bit.ENABLE) {}
}
void i2c_poweron(i2c_t dev)
{
switch (dev) {
#if I2C_0_EN
case I2C_0:
_i2c_poweron(&I2C_0_DEV);
break;
#endif
default:
return;
}
}
static void _i2c_poweroff(SercomI2cm *sercom)
{
if (sercom == NULL) {
return;
}
sercom->CTRLA.bit.ENABLE = 0;
while (sercom->SYNCBUSY.bit.ENABLE) {}
}
void i2c_poweroff(i2c_t dev)
{
switch (dev) {
#if I2C_0_EN
case I2C_0:
_i2c_poweroff(&I2C_0_DEV);
break;
#endif
default:
return;
}
}
static int _start(SercomI2cm *dev, uint8_t address, uint8_t rw_flag)
{
uint32_t timeout_counter = 0;
/* Wait for hardware module to sync */
DEBUG("Wait for device to be ready\n");
while(dev->SYNCBUSY.reg & SERCOM_I2CM_SYNCBUSY_MASK) {}
/* Set action to ACK. */
dev->CTRLB.reg &= ~SERCOM_I2CM_CTRLB_ACKACT;
/* Send Start | Address | Write/Read */
DEBUG("Generate start condition by sending address\n");
dev->ADDR.reg = (address << 1) | rw_flag | (0 << SERCOM_I2CM_ADDR_HS_Pos);
/* Wait for response on bus. */
while (!(dev->INTFLAG.reg & SERCOM_I2CM_INTFLAG_MB)
&& !(dev->INTFLAG.reg & SERCOM_I2CM_INTFLAG_SB)) {
if (++timeout_counter >= SAMD21_I2C_TIMEOUT) {
DEBUG("STATUS_ERR_TIMEOUT\n");
return -1;
}
}
/* Check for address response error unless previous error is detected. */
/* Check for error and ignore bus-error; workaround for BUSSTATE
* stuck in BUSY */
if (dev->INTFLAG.reg & SERCOM_I2CM_INTFLAG_SB) {
/* Clear write interrupt flag */
dev->INTFLAG.reg = SERCOM_I2CM_INTFLAG_SB;
/* Check arbitration. */
if (dev->STATUS.reg & SERCOM_I2CM_STATUS_ARBLOST) {
DEBUG("STATUS_ERR_PACKET_COLLISION\n");
return -2;
}
}
/* Check that slave responded with ack. */
else if (dev->STATUS.reg & SERCOM_I2CM_STATUS_RXNACK) {
/* Slave busy. Issue ack and stop command. */
dev->CTRLB.reg |= SERCOM_I2CM_CTRLB_CMD(3);
DEBUG("STATUS_ERR_BAD_ADDRESS\n");
return -3;
}
return 0;
}
static inline int _write(SercomI2cm *dev, const uint8_t *data, int length)
{
uint16_t tmp_data_length = length;
uint32_t timeout_counter = 0;
uint16_t buffer_counter = 0;
/* Write data buffer until the end. */
DEBUG("Looping through bytes\n");
while (tmp_data_length--) {
/* Check that bus ownership is not lost. */
if ((dev->STATUS.reg & SERCOM_I2CM_STATUS_BUSSTATE_Msk) != BUSSTATE_OWNER) {
DEBUG("STATUS_ERR_PACKET_COLLISION\n");
return -2;
}
/* Wait for hardware module to sync */
while(dev->SYNCBUSY.reg & SERCOM_I2CM_SYNCBUSY_MASK) {}
DEBUG("Written byte #%i to data reg, now waiting for DR to be empty again\n", buffer_counter);
dev->DATA.reg = data[buffer_counter++];
DEBUG("Wait for response.\n");
timeout_counter = 0;
while (!(dev->INTFLAG.reg & SERCOM_I2CM_INTFLAG_MB)
&& !(dev->INTFLAG.reg & SERCOM_I2CM_INTFLAG_SB)) {
if (++timeout_counter >= SAMD21_I2C_TIMEOUT) {
DEBUG("STATUS_ERR_TIMEOUT\n");
return -1;
}
}
/* Check for NACK from slave. */
if (dev->STATUS.reg & SERCOM_I2CM_STATUS_RXNACK) {
DEBUG("STATUS_ERR_OVERFLOW\n");
return -4;
}
}
return 0;
}
static inline int _read(SercomI2cm *dev, uint8_t *data, int length)
{
uint32_t timeout_counter = 0;
uint8_t count = 0;
/* Set action to ack. */
dev->CTRLB.reg &= ~SERCOM_I2CM_CTRLB_ACKACT;
/* Read data buffer. */
while (count != length) {
/* Check that bus ownership is not lost. */
if ((dev->STATUS.reg & SERCOM_I2CM_STATUS_BUSSTATE_Msk) != BUSSTATE_OWNER) {
DEBUG("STATUS_ERR_PACKET_COLLISION\n");
return -2;
}
/* Wait for hardware module to sync */
while(dev->SYNCBUSY.reg & SERCOM_I2CM_SYNCBUSY_MASK) {}
/* Save data to buffer. */
data[count] = dev->DATA.reg;
/* Wait for response. */
timeout_counter = 0;
while (!(dev->INTFLAG.reg & SERCOM_I2CM_INTFLAG_MB)
&& !(dev->INTFLAG.reg & SERCOM_I2CM_INTFLAG_SB)) {
if (++timeout_counter >= SAMD21_I2C_TIMEOUT) {
DEBUG("STATUS_ERR_TIMEOUT\n");
return -1;
}
}
count++;
}
/* Send NACK before STOP */
dev->CTRLB.reg |= SERCOM_I2CM_CTRLB_ACKACT;
return 0;
}
static inline void _stop(SercomI2cm *dev)
{
/* Wait for hardware module to sync */
while(dev->SYNCBUSY.reg & SERCOM_I2CM_SYNCBUSY_MASK) {}
/* Stop command */
dev->CTRLB.reg |= SERCOM_I2CM_CTRLB_CMD(3);
/* Wait for bus to be idle again */
while((dev->STATUS.reg & SERCOM_I2CM_STATUS_BUSSTATE_Msk) != BUSSTATE_IDLE) {}
DEBUG("Stop sent\n");
}
#endif /* I2C_NUMOF */
View Git Blame Copy Permalink