mirror of
https://github.com/RIOT-OS/RIOT.git
synced 2024-12-29 04:50:03 +01:00
132 lines
3.3 KiB
C
132 lines
3.3 KiB
C
/*
|
|
* Copyright (C) 2017 INRIA
|
|
*
|
|
* This file is subject to the terms and conditions of the GNU Lesser
|
|
* General Public License v2.1. See the file LICENSE in the top level
|
|
* directory for more details.
|
|
*/
|
|
|
|
/**
|
|
* @ingroup boards_opencm904
|
|
* @{
|
|
*
|
|
* @file
|
|
* @brief Peripheral MCU configuration for the opencm904 board
|
|
*
|
|
* @author Loïc Dauphin <loic.dauphin@inria.fr>
|
|
*/
|
|
|
|
#ifndef PERIPH_CONF_H
|
|
#define PERIPH_CONF_H
|
|
|
|
#include "periph_cpu.h"
|
|
|
|
#ifdef __cplusplus
|
|
extern "C" {
|
|
#endif
|
|
|
|
/**
|
|
* @name Clock system configuration
|
|
* @{
|
|
**/
|
|
/* high speed clock configuration:
|
|
* 0 := use internal HSI oscillator (always 8MHz)
|
|
* HSE frequency value := use external HSE oscillator with given freq [in Hz]
|
|
* must be 4000000 <= value <= 16000000 */
|
|
#define CLOCK_HSE (8000000U)
|
|
/* low speed clock configuration:
|
|
* 0 := use internal LSI oscillator (~40kHz)
|
|
* 1 := use extern LSE oscillator, always 32.768kHz */
|
|
#define CLOCK_LSE (0)
|
|
/* targeted system clock speed [in Hz], must be <= 72MHz */
|
|
#define CLOCK_CORECLOCK (72000000U)
|
|
/* PLL configuration, set both values to zero to disable PLL usage. The values
|
|
* must be set to satisfy the following equation:
|
|
* CORECLOCK := CLOCK_SOURCE / PLL_DIV * PLL_MUL
|
|
* with
|
|
* 1 <= CLOCK_PLL_DIV <= 2
|
|
* 2 <= CLOCK_PLL_MUL <= 17 */
|
|
#define CLOCK_PLL_DIV (1)
|
|
#define CLOCK_PLL_MUL (9)
|
|
/* AHB and APBx bus clock configuration, keep in mind the following constraints:
|
|
* ABP1 <= 36MHz
|
|
*/
|
|
#define CLOCK_AHB_DIV RCC_CFGR_HPRE_DIV1
|
|
#define CLOCK_AHB (CLOCK_CORECLOCK / 1)
|
|
#define CLOCK_APB2_DIV RCC_CFGR_PPRE2_DIV1
|
|
#define CLOCK_APB2 (CLOCK_CORECLOCK / 1)
|
|
#define CLOCK_APB1_DIV RCC_CFGR_PPRE1_DIV2
|
|
#define CLOCK_APB1 (CLOCK_CORECLOCK / 2)
|
|
/** @} */
|
|
|
|
/**
|
|
* @name Timer configuration
|
|
* @{
|
|
*/
|
|
static const timer_conf_t timer_config[] = {
|
|
{
|
|
.dev = TIM2,
|
|
.max = 0x0000ffff,
|
|
.rcc_mask = RCC_APB1ENR_TIM2EN,
|
|
.bus = APB1,
|
|
.irqn = TIM2_IRQn
|
|
},
|
|
{
|
|
.dev = TIM3,
|
|
.max = 0x0000ffff,
|
|
.rcc_mask = RCC_APB1ENR_TIM3EN,
|
|
.bus = APB1,
|
|
.irqn = TIM3_IRQn
|
|
}
|
|
};
|
|
|
|
#define TIMER_0_ISR isr_tim2
|
|
#define TIMER_1_ISR isr_tim3
|
|
|
|
#define TIMER_NUMOF ARRAY_SIZE(timer_config)
|
|
/** @} */
|
|
|
|
/**
|
|
* @name UART configuration
|
|
* @{
|
|
*/
|
|
static const uart_conf_t uart_config[] = {
|
|
{
|
|
.dev = USART2,
|
|
.rcc_mask = RCC_APB1ENR_USART2EN,
|
|
.rx_pin = GPIO_PIN(PORT_A, 3),
|
|
.tx_pin = GPIO_PIN(PORT_A, 2),
|
|
.bus = APB1,
|
|
.irqn = USART2_IRQn
|
|
},
|
|
{
|
|
.dev = USART1,
|
|
.rcc_mask = RCC_APB2ENR_USART1EN,
|
|
.rx_pin = GPIO_PIN(PORT_B, 7),
|
|
.tx_pin = GPIO_PIN(PORT_B, 6),
|
|
.bus = APB2,
|
|
.irqn = USART1_IRQn
|
|
},
|
|
{
|
|
.dev = USART3,
|
|
.rcc_mask = RCC_APB1ENR_USART3EN,
|
|
.rx_pin = GPIO_PIN(PORT_B, 11),
|
|
.tx_pin = GPIO_PIN(PORT_B, 10),
|
|
.bus = APB1,
|
|
.irqn = USART3_IRQn
|
|
}
|
|
};
|
|
|
|
#define UART_0_ISR isr_usart2
|
|
#define UART_1_ISR isr_usart1
|
|
#define UART_2_ISR isr_usart3
|
|
|
|
#define UART_NUMOF ARRAY_SIZE(uart_config)
|
|
/** @} */
|
|
|
|
#ifdef __cplusplus
|
|
}
|
|
#endif
|
|
|
|
#endif /* PERIPH_CONF_H */
|