mirror of
https://github.com/RIOT-OS/RIOT.git
synced 2024-12-29 04:50:03 +01:00
d37adee32d
There is no hardware limitation for custom boards based on STM32 to uses SPI bus with signals coming from different PORT and alternate functions. This patch allow alternate's function definition per pin basis, thus enable the support of SPI bus signals routed on differents PORT. Signed-off-by: Yannick Gicquel <ygicquel@gmail.com>
140 lines
3.4 KiB
C
140 lines
3.4 KiB
C
/*
|
|
* Copyright (C) 2017 Freie Universität Berlin
|
|
* 2017 Inria
|
|
*
|
|
* This file is subject to the terms and conditions of the GNU Lesser
|
|
* General Public License v2.1. See the file LICENSE in the top level
|
|
* directory for more details.
|
|
*/
|
|
|
|
/**
|
|
* @ingroup boards_nucleo-l031k6
|
|
* @{
|
|
*
|
|
* @file
|
|
* @brief Peripheral MCU configuration for the nucleo-l031k6 board
|
|
*
|
|
* @author Hauke Petersen <hauke.petersen@fu-berlin.de>
|
|
* @author Alexandre Aabdie <alexandre.abadie@inria.fr>
|
|
*/
|
|
|
|
#ifndef PERIPH_CONF_H
|
|
#define PERIPH_CONF_H
|
|
|
|
#include "periph_cpu.h"
|
|
#include "l0/cfg_clock_32_16_1.h"
|
|
#include "cfg_i2c1_pb6_pb7.h"
|
|
#include "cfg_rtt_default.h"
|
|
#include "cfg_timer_tim2.h"
|
|
|
|
#ifdef __cplusplus
|
|
extern "C" {
|
|
#endif
|
|
|
|
/**
|
|
* @name UART configuration
|
|
* @{
|
|
*/
|
|
static const uart_conf_t uart_config[] = {
|
|
{
|
|
.dev = USART2,
|
|
.rcc_mask = RCC_APB1ENR_USART2EN,
|
|
.rx_pin = GPIO_PIN(PORT_A, 15),
|
|
.tx_pin = GPIO_PIN(PORT_A, 2),
|
|
.rx_af = GPIO_AF4,
|
|
.tx_af = GPIO_AF4,
|
|
.bus = APB1,
|
|
.irqn = USART2_IRQn,
|
|
.type = STM32_USART,
|
|
.clk_src = 0, /* Use APB clock */
|
|
}
|
|
};
|
|
|
|
#define UART_0_ISR (isr_usart2)
|
|
|
|
#define UART_NUMOF ARRAY_SIZE(uart_config)
|
|
/** @} */
|
|
|
|
/**
|
|
* @name PWM configuration
|
|
* @{
|
|
*/
|
|
static const pwm_conf_t pwm_config[] = {
|
|
{
|
|
.dev = TIM21,
|
|
.rcc_mask = RCC_APB2ENR_TIM21EN,
|
|
.chan = { { .pin = GPIO_PIN(PORT_B, 6) /* D5 */, .cc_chan = 0 },
|
|
{ .pin = GPIO_UNDEF, .cc_chan = 0 },
|
|
{ .pin = GPIO_UNDEF, .cc_chan = 0 },
|
|
{ .pin = GPIO_UNDEF, .cc_chan = 0 } },
|
|
.af = GPIO_AF5,
|
|
.bus = APB2
|
|
}
|
|
};
|
|
|
|
#define PWM_NUMOF ARRAY_SIZE(pwm_config)
|
|
/** @} */
|
|
|
|
/**
|
|
* @name SPI configuration
|
|
* @{
|
|
*/
|
|
static const uint8_t spi_divtable[2][5] = {
|
|
{ /* for APB1 @ 32000000Hz */
|
|
7, /* -> 125000Hz */
|
|
5, /* -> 500000Hz */
|
|
4, /* -> 1000000Hz */
|
|
2, /* -> 4000000Hz */
|
|
1 /* -> 8000000Hz */
|
|
},
|
|
{ /* for APB2 @ 32000000Hz */
|
|
7, /* -> 125000Hz */
|
|
5, /* -> 500000Hz */
|
|
4, /* -> 1000000Hz */
|
|
2, /* -> 4000000Hz */
|
|
1 /* -> 8000000Hz */
|
|
}
|
|
};
|
|
|
|
static const spi_conf_t spi_config[] = {
|
|
{
|
|
.dev = SPI1,
|
|
.mosi_pin = GPIO_PIN(PORT_B, 5),
|
|
.miso_pin = GPIO_PIN(PORT_B, 4),
|
|
.sclk_pin = GPIO_PIN(PORT_B, 3),
|
|
.cs_pin = GPIO_UNDEF,
|
|
.mosi_af = GPIO_AF0,
|
|
.miso_af = GPIO_AF0,
|
|
.sclk_af = GPIO_AF0,
|
|
.cs_af = GPIO_AF0,
|
|
.rccmask = RCC_APB2ENR_SPI1EN,
|
|
.apbbus = APB2
|
|
}
|
|
};
|
|
|
|
#define SPI_NUMOF ARRAY_SIZE(spi_config)
|
|
/** @} */
|
|
|
|
/**
|
|
* @name ADC configuration
|
|
* @{
|
|
*/
|
|
#define ADC_CONFIG { \
|
|
{ GPIO_PIN(PORT_A, 0), 0 }, /* Pin A0 */ \
|
|
{ GPIO_PIN(PORT_A, 1), 1 }, /* Pin A1 */ \
|
|
{ GPIO_PIN(PORT_A, 3), 3 }, /* Pin A2 */ \
|
|
{ GPIO_PIN(PORT_A, 4), 4 }, /* Pin A3 */ \
|
|
{ GPIO_PIN(PORT_A, 5), 5 }, /* Pin A4 */ \
|
|
{ GPIO_PIN(PORT_A, 6), 6 }, /* Pin A5 */ \
|
|
{ GPIO_PIN(PORT_A, 7), 7 }, /* Pin A6 */ \
|
|
}
|
|
#define ADC_NUMOF (7U)
|
|
/** @} */
|
|
|
|
#ifdef __cplusplus
|
|
}
|
|
#endif
|
|
|
|
#endif /* PERIPH_CONF_H */
|
|
/** @} */
|