RIOT-OS/RIOT
RIOT-OS/RIOT
1
0
Fork 0
mirror of https://github.com/RIOT-OS/RIOT.git synced 2024-12-29 04:50:03 +01:00
Code Releases Activity
7d2c4c4cbc
RIOT/sys/include/net/gnrc/ndp.h
Benjamin Valentin 68afd9d900 gnrc_ndp: add route information option
2021-06-18 00:13:08 +02:00

420 lines
18 KiB
C
Raw Blame History

/*
* Copyright (C) 2017 Freie Universität Berlin
*
* This file is subject to the terms and conditions of the GNU Lesser
* General Public License v2.1. See the file LICENSE in the top level
* directory for more details.
*/
/**
* @defgroup net_gnrc_ndp IPv6 neighbor discovery (v2)
* @ingroup net_gnrc_ipv6
* @brief Provides build and send functions for neighbor discovery packets
* @{
*
* @file
* @brief GNRC-specific neighbor discovery definitions
*
* @author Martine Lenders <m.lenders@fu-berlin.de>
*/
#ifndef NET_GNRC_NDP_H
#define NET_GNRC_NDP_H
#include <stdint.h>
#include "net/gnrc/pkt.h"
#include "net/gnrc/netif.h"
#include "net/ipv6/addr.h"
#include "net/ipv6/hdr.h"
#ifdef __cplusplus
extern "C" {
#endif
/**
* @brief @ref net_gnrc_nettype to send NDP packets to
*/
#ifndef GNRC_NETTYPE_NDP
# if defined(MODULE_GNRC_IPV6) || DOXYGEN
# define GNRC_NETTYPE_NDP (GNRC_NETTYPE_IPV6) /* usual configuration */
# else
# define GNRC_NETTYPE_NDP (GNRC_NETTYPE_UNDEF) /* for testing */
# endif
#endif /* GNRC_NETTYPE_NDP */
/**
* @brief Builds a neighbor solicitation message for sending.
*
* @pre `(tgt != NULL) && !ipv6_addr_is_multicast(tgt)`
*
* @see [RFC 4861, section 4.3](https://tools.ietf.org/html/rfc4861#section-4.3)
*
* @param[in] tgt The target address of the neighbor solicitation.
* Must not be NULL or a multicast address.
* @param[in] options Options to append to the neighbor solicitation.
* May be NULL for none.
*
* @return The resulting ICMPv6 packet on success.
* @return NULL, if packet buffer is full.
*/
gnrc_pktsnip_t *gnrc_ndp_nbr_sol_build(const ipv6_addr_t *tgt,
gnrc_pktsnip_t *options);
/**
* @brief Builds a neighbor advertisement message for sending.
*
* @pre `(tgt != NULL) && !ipv6_addr_is_multicast(tgt)`
*
* @see [RFC 4861, section 4.4](https://tools.ietf.org/html/rfc4861#section-4.4")
*
* @param[in] tgt For solicited advertisements, the Target Address field
* in the neighbor solicitaton.
* For and unsolicited advertisement, the address whose
* link-layer address has changed.
* Must not be NULL or a multicast address.
* @param[in] flags Neighbor advertisement flags:
* - @ref NDP_NBR_ADV_FLAGS_R == 1 indicates, that the
* sender is a router,
* - @ref NDP_NBR_ADV_FLAGS_S == 1 indicates that the
* advertisement was sent in response to a neighbor
* solicitation,
* - @ref NDP_NBR_ADV_FLAGS_O == 1 indicates that the
* advertisement should override an existing cache entry
* and update the cached link-layer address.
* @param[in] options Options to append to the neighbor advertisement.
* May be NULL for none.
*
* @return The resulting ICMPv6 packet on success.
* @return NULL, if packet buffer is full.
*/
gnrc_pktsnip_t *gnrc_ndp_nbr_adv_build(const ipv6_addr_t *tgt, uint8_t flags,
gnrc_pktsnip_t *options);
/**
* @brief Builds a router solicitation message for sending.
*
* @see `[RFC 4861, section 4.1](https://tools.ietf.org/html/rfc4861#section-4.1")
*
* @param[in] options Options to append to the router solicitation.
* May be NULL for none.
*
* @return The resulting ICMPv6 packet on success.
* @return NULL, if packet buffer is full.
*/
gnrc_pktsnip_t *gnrc_ndp_rtr_sol_build(gnrc_pktsnip_t *options);
/**
* @brief Builds a router advertisement message for sending.
*
* @see `[RFC 4861, section 4.2](https://tools.ietf.org/html/rfc4861#section-4.2")
*
* @note The source address for the packet MUST be the link-local address
* of the interface.
*
* @param[in] cur_hl Default hop limit for outgoing IP packets, 0 if
* unspecified by this router.
* @param[in] flags Flags as defined in net/ndp.h.
* - @ref NDP_RTR_ADV_FLAGS_M == 1 indicates, that the
* addresses are managed by DHCPv6,
* - @ref NDP_RTR_ADV_FLAGS_O == 1 indicates that other
* configuration information is available via DHCPv6.
* @param[in] ltime Lifetime of the default router in seconds.
* @param[in] reach_time Time in milliseconds a node should assume a neighbor
* reachable. 0 means unspecified by the router.
* @param[in] retrans_timer Time in milliseconds between retransmitted
* neighbor solicitations. 0 means unspecified by
* the router.
* @param[in] options Options to append to the router advertisement.
* May be NULL for none.
*
* @return The resulting ICMPv6 packet on success.
* @return NULL, if packet buffer is full.
*/
gnrc_pktsnip_t *gnrc_ndp_rtr_adv_build(uint8_t cur_hl, uint8_t flags,
uint16_t ltime, uint32_t reach_time,
uint32_t retrans_timer,
gnrc_pktsnip_t *options);
/**
* @brief Builds a generic NDP option.
*
* @param[in] type Type of the option.
* @param[in] size Size in byte of the option (will be rounded up to the next
* multiple of 8).
* @param[in] next More options in the packet. NULL, if there are none.
*
* @return The packet snip list of options, on success
* @return NULL, if packet buffer is full
*/
gnrc_pktsnip_t *gnrc_ndp_opt_build(uint8_t type, size_t size,
gnrc_pktsnip_t *next);
/**
* @brief Builds the source link-layer address option.
*
* @pre `(l2addr != NULL) && (l2addr_len != 0)`
*
* @see [RFC 4861, section 4.6.1](https://tools.ietf.org/html/rfc4861#section-4.6.1)
*
* @note Should only be used with neighbor solicitations, router solicitations,
* and router advertisements. This is not checked however, since
* hosts should silently ignore it in other NDP messages.
*
* @param[in] l2addr A link-layer address of variable length.
* Must not be NULL.
* @param[in] l2addr_len Length of @p l2addr. Must not be 0.
* @param[in] next More options in the packet. NULL, if there are none.
*
* @return The packet snip list of options, on success
* @return NULL, if packet buffer is full
*/
gnrc_pktsnip_t *gnrc_ndp_opt_sl2a_build(const uint8_t *l2addr,
uint8_t l2addr_len,
gnrc_pktsnip_t *next);
/**
* @brief Builds the target link-layer address option.
*
* @pre `(l2addr != NULL) && (l2addr_len != 0)`
*
* @see [RFC 4861, section 4.6.1](https://tools.ietf.org/html/rfc4861#section-4.6.1)
*
* @note Should only be used with neighbor advertisemnents and redirect packets.
* This is not checked however, since hosts should silently ignore it
* in other NDP messages.
*
* @param[in] l2addr A link-layer address of variable length.
* Must not be NULL.
* @param[in] l2addr_len Length of @p l2addr. Must not be 0.
* @param[in] next More options in the packet. NULL, if there are none.
*
* @return The pkt snip list of options, on success
* @return NULL, if packet buffer is full
*/
gnrc_pktsnip_t *gnrc_ndp_opt_tl2a_build(const uint8_t *l2addr,
uint8_t l2addr_len,
gnrc_pktsnip_t *next);
/**
* @brief Builds the prefix information option.
*
* @pre `prefix != NULL`
* @pre `!ipv6_addr_is_link_local(prefix) && !ipv6_addr_is_multicast(prefix)`
* @pre `prefix_len <= 128`
*
* @see [RFC 4861, section 4.6.2](https://tools.ietf.org/html/rfc4861#section-4.6.2)
*
* @note Should only be used with router advertisemnents. This is not checked
* however, since nodes should silently ignore it in other NDP messages.
*
* @param[in] prefix An IPv6 address or a prefix of an IPv6 address.
* Must not be NULL or be a link-local or
* multicast address.
* @param[in] prefix_len The length of @p prefix in bits. Must be between
* 0 and 128.
* @param[in] valid_ltime Length of time in seconds that @p prefix is valid.
* UINT32_MAX represents infinity.
* @param[in] pref_ltime Length of time in seconds that addresses using
* @p prefix remain preferred. UINT32_MAX represents
* infinity.
* @param[in] flags Flags as defined in net/ndp.h.
* - @ref NDP_OPT_PI_FLAGS_L == 1 indicates, that
* @p prefix can be used for on-link determination,
* - @ref NDP_OPT_PI_FLAGS_A == 1 indicates, that
* @p prefix can be used for stateless address
* configuration.
* @param[in] next More options in the packet. NULL, if there are none.
*
* @return The packet snip list of options, on success
* @return NULL, if packet buffer is full
*/
gnrc_pktsnip_t *gnrc_ndp_opt_pi_build(const ipv6_addr_t *prefix,
uint8_t prefix_len,
uint32_t valid_ltime, uint32_t pref_ltime,
uint8_t flags, gnrc_pktsnip_t *next);
/**
* @brief Builds the route information option.
*
* @pre `prefix != NULL`
* @pre `!ipv6_addr_is_link_local(prefix) && !ipv6_addr_is_multicast(prefix)`
* @pre `prefix_len <= 128`
*
* @see [RFC 4191, section 2.3](https://tools.ietf.org/html/rfc4191#section-2.3)
*
* @note Should only be used with router advertisemnents. This is not checked
* however, since nodes should silently ignore it in other NDP messages.
*
* @param[in] prefix An IPv6 address or a prefix of an IPv6 address.
* Must not be NULL or be a link-local or
* multicast address.
* @param[in] prefix_len The length of @p prefix in bits. Must be between
* 0 and 128.
* @param[in] route_ltime Length of time in seconds that @p prefix is valid.
* UINT32_MAX represents infinity.
* @param[in] flags Flags as defined in net/ndp.h.
* @param[in] next More options in the packet. NULL, if there are none.
*
* @return The packet snip list of options, on success
* @return NULL, if packet buffer is full
*/
gnrc_pktsnip_t *gnrc_ndp_opt_ri_build(const ipv6_addr_t *prefix,
uint8_t prefix_len,
uint32_t route_ltime,
uint8_t flags, gnrc_pktsnip_t *next);
/**
* @brief Builds the MTU option.
*
* @see [RFC 4861, section 4.6.4](https://tools.ietf.org/html/rfc4861#section-4.6.4)
*
* @note Should only be used with router advertisemnents. This is not checked
* however, since nodes should silently ignore it in other NDP messages.
*
* @param[in] mtu The recommended MTU for the link.
* @param[in] next More options in the packet. NULL, if there are none.
*
* @return The packet snip list of options, on success
* @return NULL, if packet buffer is full
*/
gnrc_pktsnip_t *gnrc_ndp_opt_mtu_build(uint32_t mtu, gnrc_pktsnip_t *next);
/**
* @brief Builts the recursive DNS server option
*
* @see [RFC 8106, section 5.1](https://tools.ietf.org/html/rfc8106#section-5.1)
* @pre `addrs != NULL`
* @pre `addrs_num > 0`
*
* @note Should only be used with router advertisemnents. This is not checked
* however, since nodes should silently ignore it in other NDP messages.
*
* @param[in] lifetime The lifetime of the recursive DNS servers
* @param[in] addrs The addresses of the recursive DNS servers
* @param[in] addrs_num The number of addresses in @p addrs
* @param[in] next More options in the packet. NULL, if there are none.
*
* @return The packet snip list of options, on success
* @return @p next, if RDNSS is not supported
* @return NULL, if packet buffer is full
*/
gnrc_pktsnip_t *gnrc_ndp_opt_rdnss_build(uint32_t lifetime, ipv6_addr_t *addrs,
unsigned addrs_num,
gnrc_pktsnip_t *next);
/**
* @brief Send pre-compiled neighbor solicitation depending on a given network
* interface.
*
* @pre `(tgt != NULL) && !ipv6_addr_is_multicast(tgt)`
* @pre `(netif != NULL) && (dst != NULL)`
*
* @param[in] tgt The target address of the neighbor solicitation.
* Must not be NULL or a multicast address.
* @param[in] netif Interface to send over. Must not be NULL.
* @param[in] src Source address for the neighbor solicitation. Will be
* chosen from the interface according to @p dst, if NULL.
* @param[in] dst Destination address for neighbor solicitation. Must not
* be NULL.
* @param[in] ext_opts External options for the neighbor advertisement.
* Leave NULL for none.
* **Warning:** these are not tested if they are suitable
* for a neighbor solicitation so be sure to check that.
* **Will be released** in an error case.
*/
void gnrc_ndp_nbr_sol_send(const ipv6_addr_t *tgt, gnrc_netif_t *netif,
const ipv6_addr_t *src, const ipv6_addr_t *dst,
gnrc_pktsnip_t *ext_opts);
/**
* @brief Send pre-compiled neighbor advertisement depending on a given
* network interface.
*
* @pre `(tgt != NULL) && !ipv6_addr_is_multicast(tgt)`
* @pre `(netif != NULL) && (dst != NULL)`
*
* If @p netif is a forwarding interface and router advertisements are
* activated the @ref NDP_NBR_ADV_FLAGS_R is set in the neighbor advertisement.
* If @p dst is @ref IPV6_ADDR_UNSPECIFIED it will be replaced with
* @ref IPV6_ADDR_ALL_NODES_LINK_LOCAL and* @p supply_tl2a is set to true
* implicitly. Otherwise, the @ref NDP_NBR_ADV_FLAGS_S will be set. If @p tgt
* is an anycast address on @p netif the @ref NDP_NBR_ADV_FLAGS_O flag will be
* set.
*
* The source address of the IPv6 packet will be left unspecified, so the
* @ref net_gnrc_ipv6 "IPv6 module" selects a fitting IPv6 address.
*
* @param[in] tgt Target address for the neighbor advertisement. May
* not be NULL and **MUST NOT** be multicast.
* @param[in] netif Interface to send over. Must not be NULL.
* @param[in] dst Destination address for neighbor advertisement. May
* not be NULL. Is set to
* @ref IPV6_ADDR_ALL_NODES_LINK_LOCAL when equal to
* @ref IPV6_ADDR_UNSPECIFIED (to allow for simple
* reply mechanisms to neighbor solicitations). This
* also implies that @p supply_tl2a **must** be true
* and the parameter will be reset accordingly. If
* @p dst is not @ref IPV6_ADDR_UNSPECIFIED, the
* @ref NDP_NBR_ADV_FLAGS_S flag will be set
* implicitly.
* @param[in] supply_tl2a Add target link-layer address option to neighbor
* advertisement if link-layer has addresses.
* If @p dst is @ref IPV6_ADDR_UNSPECIFIED, it will be
* set to true.
* @param[in] ext_opts External options for the neighbor advertisement.
* Leave NULL for none.
* **Warning:** these are not tested if they are
* suitable for a neighbor advertisement so be sure to
* check that.
* **Will be released** in an error case.
*/
void gnrc_ndp_nbr_adv_send(const ipv6_addr_t *tgt, gnrc_netif_t *netif,
const ipv6_addr_t *dst, bool supply_tl2a,
gnrc_pktsnip_t *ext_opts);
/**
* @brief Send pre-compiled router solicitation depending on a given
* network interface.
*
* @pre `(netif != NULL)`
*
* @param[in] netif Interface to send over. Must not be NULL.
* @param[in] dst Destination for the router solicitation. ff02::2 if NULL.
*/
void gnrc_ndp_rtr_sol_send(gnrc_netif_t *netif, const ipv6_addr_t *dst);
/**
* @brief Send pre-compiled router advertisement depending on a given network
* interface.
*
* @pre `(netif != NULL)`
*
* This function does not add the PIOs to the router, since they are highly
* dependent on external set-ups (e.g. if multihop prefix distribution is used).
* Provide them via @p ext_opts
*
* @param[in] netif Interface to send over. Must not be NULL.
* @param[in] src Source address for the router advertisement. May be
* NULL to be determined by source address selection
* (:: if @p netif has no address).
* @param[in] dst Destination address for router advertisement.
* ff02::1 if NULL.
* @param[in] fin This is part of the router's final batch of router
* advertisements before ceising to be a router (set's
* router lifetime field to 0).
* @param[in] ext_opts External options for the neighbor advertisement.
* Leave NULL for none.
* **Warning:** these are not tested if they are suitable
* for a neighbor advertisement so be sure to check that.
* **Will be released** in an error case.
*/
void gnrc_ndp_rtr_adv_send(gnrc_netif_t *netif, const ipv6_addr_t *src,
const ipv6_addr_t *dst, bool fin,
gnrc_pktsnip_t *ext_opts);
#ifdef __cplusplus
}
#endif
#endif /* NET_GNRC_NDP_H */
/** @} */
View Git Blame Copy Permalink