mirror of
https://github.com/RIOT-OS/RIOT.git
synced 2024-12-29 04:50:03 +01:00
51 lines
2.4 KiB
Plaintext
51 lines
2.4 KiB
Plaintext
/**
|
|
@defgroup boards_nucleo-l496zg STM32 Nucleo-L496ZG
|
|
@ingroup boards_common_nucleo144
|
|
@brief Support for the STM32 Nucleo-l496zg
|
|
|
|
## Overview
|
|
|
|
The Nucleo-L496ZG is a board from ST's Nucleo family supporting ARM Cortex-M4
|
|
STM32L496ZG ultra-low-pawer microcontroller with 320KiB of RAM and 1 MiB of Flash.
|
|
|
|
## Pinout
|
|
|
|
@image html pinouts/nucleo-l496zg.svg "Pinout for the Nucleo-L496ZG (from STM user manual, UM2179, https://www.st.com/resource/en/user_manual/um2179-stm32-nucleo144-boards-mb1312-stmicroelectronics.pdf, page 31)" width=55%
|
|
|
|
### MCU
|
|
|
|
| MCU | STM32L496ZG |
|
|
|:---------- |:------------------ |
|
|
| Family | ARM Cortex-M4F |
|
|
| Vendor | ST Microelectronics|
|
|
| RAM | 320KiB |
|
|
| Flash | 1MiB |
|
|
| Frequency | up to 80MHz |
|
|
| FPU | yes |
|
|
| Timers | 16 (2x watchdog, 1 SysTick, 11x 16-bit, 2x 32-bit) |
|
|
| ADCs | 3x 12-bit (24 channels |
|
|
| UARTs | 6 (5x UARTs and one Low-Power UART) |
|
|
| SPIs | 3 |
|
|
| I2Cs | 4 |
|
|
| RTC | 1 |
|
|
| CAN | 2 |
|
|
| Datasheet | [Datasheet](https://www.st.com/resource/en/datasheet/stm32l496vg.pdf) |
|
|
| Reference Manual | [Reference Manual](https://www.st.com/resource/en/reference_manual/rm0351-stm32l47xxx-stm32l48xxx-stm32l49xxx-and-stm32l4axxx-advanced-armbased-32bit-mcus-stmicroelectronics.pdf) |
|
|
| Programming Manual | [Programming Manual](https://www.st.com/content/ccc/resource/technical/document/programming_manual/6c/3a/cb/e7/e4/ea/44/9b/DM00046982.pdf/files/DM00046982.pdf/jcr:content/translations/en.DM00046982.pdf) |
|
|
| Board Manual | [Board Manual](https://www.st.com/resource/en/user_manual/um2179-stm32-nucleo144-boards-mb1312-stmicroelectronics.pdf) |
|
|
|
|
## Flashing the Board Using ST-LINK Removable Media
|
|
|
|
On-board ST-LINK programmer provides via composite USB device removable media.
|
|
Copying the HEX file causes reprogramming of the board. This task
|
|
could be performed manually; however, the cpy2remed (copy to removable
|
|
media) PROGRAMMER script does this automatically. To program board in
|
|
this manner, use the command:
|
|
```
|
|
make BOARD=nucleo-l496zg PROGRAMMER=cpy2remed flash
|
|
```
|
|
@note This PROGRAMMER was tested using ST-LINK firmware 2.37.26. Firmware updates
|
|
can be found on [this STM webpage](https://www.st.com/en/development-tools/stsw-link007.html
|
|
|
|
*/
|