mirror of
https://github.com/RIOT-OS/RIOT.git
synced 2024-12-29 04:50:03 +01:00
41 lines
1.5 KiB
Plaintext
41 lines
1.5 KiB
Plaintext
/**
|
|
@defgroup boards_alientek-pandora Alientek Pandora
|
|
@ingroup boards
|
|
@brief Support for the Alientek Pandora board
|
|
|
|
## Overview
|
|
|
|
The Alientek Pandora is a development board manufactured jointly by Alientek and RT-Thread company.
|
|
It is based on STM32L475VET6 and have on-board LCD, SD card and WiFi access.
|
|
Users may connect to its on board ST-Link 2.1 compatible debugger to flash or debug.
|
|
|
|
Documents of this board are available on its [Alientek official website](http://www.alientek.com/productinfo/716137.html).
|
|
It may require a translation software to read it in English.
|
|
Additional resources may be found on [RT-Thread bsp support page](https://gitee.com/rtthread/rt-thread/tree/master/bsp/stm32/stm32l475-atk-pandora).
|
|
|
|
### Flashing the board
|
|
|
|
To flash the board, use the on board ST-Link programmer/debugger.
|
|
Input the following command:
|
|
|
|
make BOARD=alientek-pandora -C examples/hello-world flash
|
|
|
|
The NRST pin is connected to the on board debugger, so users do not need to reset manually
|
|
every time it requires to flash.
|
|
|
|
If the operating system raised a fault, users may manually reset the chip by pressing the reset button.
|
|
This button has a black color and is located between the four keys and the LED light.
|
|
|
|
### STDIO
|
|
|
|
STDIO is connected to pins PA9 (TX) and PA10 (RX).
|
|
Before you begin, check that the both the jumper caps marked as 'USART1' is connected.
|
|
|
|
Use the `term` target to open a terminal:
|
|
|
|
make BOARD=alientek-pandora -C examples/hello-world term
|
|
|
|
An on-board ST-Link compatible debugger is used to transport serial STDIO message.
|
|
|
|
*/
|