RIOT/dist/tools/sniffer

RIOT Sniffer Application

About

This sniffer script can be used to sniff network traffic using RIOT based nodes. It is primarily designed for sniffing wireless data traffic, but can also well be used for wired network traffic, as long as the used network devices support promiscuous mode and output of raw data.

The sniffer is based on a RIOT node running the sniffer application application located in RIOTs application repository. This node outputs received network traffic via a serial port in the Wireshark pcap format. This output is then parsed by the sniffer.py script included in this folder run on a host computer.

The sniffer.py script is a modified version of malvira's script for the Redbee Ecotag (https://github.com/malvira/libmc1322x/wiki/wireshark).

Dependencies

The sniffer.py script needs pyserial.

Installing the dependencies:

Debuntu

apt-get install python-serial

PIP

pip install pyserial

Usage

General usage:

1. Flash an applicable RIOT node with the sniffer application from (https://github.com/RIOT-OS/applications/tree/master/sniffer)

2. Run the sniffer.py script

$ ./sniffer.py <tty> <baudrate> <channel> [outfile]

The script has the following parameters:

• tty: The serial port the RIOT board is connected to. Under Linux, this is typically something like /dev/ttyUSB0 or /dev/ttyACM0. Under Windows, this is typically something like COM0 or COM1
• baudrate: The baudrate the serial port is configured to. The default in RIOT is 115200, though this is defined per board and some boards have some other value defined per default. NOTE: when sniffing networks where the on-air bitrate is > baudrate, it makes sense to increase the baudrate so no data is skipped when sniffing.
• channel: The radio channel to use when sniffing. Possible values vary and depend on the link-layer that is sniffed. This parameter is ignored when sniffing wired networks.
• [outfile]: When this parameter is specified, the sniffer output is saved into this file. See the examples below for alternatives to specifying this parameter. (optional)

Examples

The following examples are made when using the sniffer application together with an iotlab-m3 node that is connected to /dev/ttyUSB1 (or COM1) and runs per default with a baudrate of 500000.

Linux

Dump packets to a file:

$ ./sniffer.py /dev/ttyUSB1 500000 17 > foo.pcap

This .pcap can then be opened in wireshark.

Alternatively for live captures, you can pipe directly into wireshark with:

$ ./sniffer.py /dev/ttyUSB1 500000 17 | wireshark -k -i -

Windows

For windows you can use the optional third argument to output to a .pcap:

$ ./sniffer.py COM1 500000 17 foo.pcap