RIOT-OS/RIOT
RIOT-OS/RIOT
1
0
Fork 0
mirror of https://github.com/RIOT-OS/RIOT.git synced 2024-12-29 04:50:03 +01:00
Code Releases Activity
5f355e7210
RIOT/tests/driver_feetech
History
Marian Buschsieweke 0e90e6195f
tests: Updated Updated BOARD_INSUFFICIENT_MEMORY 
Added arduino-nano to BOARD_INSUFFICIENT_MEMORY/BOARD_BLACKLIST following suit
of how arduino-uno is marked, as arduino-nano is mostly an Uno in a different
form factor.
2019-03-14 15:39:54 +01:00
..
main.c boards/cpu/drivers/sys: use generic stdio_ if 2018-08-22 10:54:25 +02:00
Makefile tests: Updated Updated BOARD_INSUFFICIENT_MEMORY 2019-03-14 15:39:54 +01:00
README.md tests/driver_feetech: initial support 2017-03-27 15:51:36 +02:00

README.md

About

This application is intended for testing Feetech TTL bus. It is especially designed to test Feetech SCS15 servomotors.

Usage

To have the list of available commands :

help

You will need to initialize one UART at 1000000 baudrate (if the servomotor is in factory configuration) :

init 1 1000000

To ping the servomotor :

ping 1

Be careful ! If 2 servomotors with the same ID are connected on the same bus, you will have no response. Factory configuration ID is 1, you need to change this to connect an other servo.

To scan every connected servomotors (IDs from 0 to 253) :

scan

To read a servo register :

read 1 PRESENT_POSITION

To move a servo, you need to enable the torque and set the goal position [0-1024] :

write 1 ENABLE_TORQUE 1
write 1 GOAL_POSITION 512