RIOT-OS/RIOT
RIOT-OS/RIOT
1
0
Fork 0
mirror of https://github.com/RIOT-OS/RIOT.git synced 2025-01-18 06:32:45 +01:00
Code Releases Activity
44cd632af0
RIOT/cpu/msp430/vendor/msp430-gcc-support-files/include/msp430f2618_symbols.ld
Marian Buschsieweke ff7f8ae2f0
cpu/msp430: reorganize code 
RIOT supports two distinct families of the MSP430: The [MSP430 x1xx]
MCU family and the [MSP430 F2xx/G2xx] MCU family. For both incompatible
MCU families the code was located in the msp430fxyz folder, resulting
in case of the UART driver in particularly bizarre code looking roughly
like this:

    #ifndef UART_USE_USCI
    /* implementation of x1xx peripheral ... */
    #else
    /* implementation of F2xx/G2xx peripheral ... */
    #endif
    /* zero shared code between both variants */

This splits the peripheral drivers for USCI and USART serial IP blocks
into separate files and relocates everything in cpu/msp430, similar to
how cpu/stm32 is organized.

[MSP430 x1xx]: https://www.ti.com/lit/ug/slau049f/slau049f.pdf
[MSP430 F2xx/G2xx]: https://www.ti.com/lit/ug/slau144k/slau144k.pdf
2023-06-19 17:14:57 +02:00

329 lines
14 KiB
Plaintext
Raw Blame History

/* ============================================================================ */
/* Copyright (c) 2021, Texas Instruments Incorporated */
/* All rights reserved. */
/* */
/* Redistribution and use in source and binary forms, with or without */
/* modification, are permitted provided that the following conditions */
/* are met: */
/* */
/* * Redistributions of source code must retain the above copyright */
/* notice, this list of conditions and the following disclaimer. */
/* */
/* * Redistributions in binary form must reproduce the above copyright */
/* notice, this list of conditions and the following disclaimer in the */
/* documentation and/or other materials provided with the distribution. */
/* */
/* * Neither the name of Texas Instruments Incorporated nor the names of */
/* its contributors may be used to endorse or promote products derived */
/* from this software without specific prior written permission. */
/* */
/* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" */
/* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, */
/* THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR */
/* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR */
/* CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, */
/* EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, */
/* PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; */
/* OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, */
/* WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR */
/* OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, */
/* EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */
/* ============================================================================ */
/* This file supports MSP430F2618 devices. */
/* Version: 1.212 */
/************************************************************
* STANDARD BITS
************************************************************/
/************************************************************
* STATUS REGISTER BITS
************************************************************/
/************************************************************
* PERIPHERAL FILE MAP
************************************************************/
/************************************************************
* SPECIAL FUNCTION REGISTER ADDRESSES + CONTROL BITS
************************************************************/
PROVIDE(IE1 = 0x0000);
PROVIDE(IFG1 = 0x0002);
PROVIDE(IE2 = 0x0001);
PROVIDE(IFG2 = 0x0003);
PROVIDE(UC1IE = 0x0006);
PROVIDE(UC1IFG = 0x0007);
/************************************************************
* ADC12
************************************************************/
PROVIDE(ADC12CTL0 = 0x01A0);
PROVIDE(ADC12CTL1 = 0x01A2);
PROVIDE(ADC12IFG = 0x01A4);
PROVIDE(ADC12IE = 0x01A6);
PROVIDE(ADC12IV = 0x01A8);
PROVIDE(ADC12MEM0 = 0x0140);
PROVIDE(ADC12MEM1 = 0x0142);
PROVIDE(ADC12MEM2 = 0x0144);
PROVIDE(ADC12MEM3 = 0x0146);
PROVIDE(ADC12MEM4 = 0x0148);
PROVIDE(ADC12MEM5 = 0x014A);
PROVIDE(ADC12MEM6 = 0x014C);
PROVIDE(ADC12MEM7 = 0x014E);
PROVIDE(ADC12MEM8 = 0x0150);
PROVIDE(ADC12MEM9 = 0x0152);
PROVIDE(ADC12MEM10 = 0x0154);
PROVIDE(ADC12MEM11 = 0x0156);
PROVIDE(ADC12MEM12 = 0x0158);
PROVIDE(ADC12MEM13 = 0x015A);
PROVIDE(ADC12MEM14 = 0x015C);
PROVIDE(ADC12MEM15 = 0x015E);
PROVIDE(ADC12MCTL0 = 0x0080);
PROVIDE(ADC12MCTL1 = 0x0081);
PROVIDE(ADC12MCTL2 = 0x0082);
PROVIDE(ADC12MCTL3 = 0x0083);
PROVIDE(ADC12MCTL4 = 0x0084);
PROVIDE(ADC12MCTL5 = 0x0085);
PROVIDE(ADC12MCTL6 = 0x0086);
PROVIDE(ADC12MCTL7 = 0x0087);
PROVIDE(ADC12MCTL8 = 0x0088);
PROVIDE(ADC12MCTL9 = 0x0089);
PROVIDE(ADC12MCTL10 = 0x008A);
PROVIDE(ADC12MCTL11 = 0x008B);
PROVIDE(ADC12MCTL12 = 0x008C);
PROVIDE(ADC12MCTL13 = 0x008D);
PROVIDE(ADC12MCTL14 = 0x008E);
PROVIDE(ADC12MCTL15 = 0x008F);
/************************************************************
* Basic Clock Module
************************************************************/
PROVIDE(DCOCTL = 0x0056);
PROVIDE(BCSCTL1 = 0x0057);
PROVIDE(BCSCTL2 = 0x0058);
PROVIDE(BCSCTL3 = 0x0053);
/************************************************************
* Comparator A
************************************************************/
PROVIDE(CACTL1 = 0x0059);
PROVIDE(CACTL2 = 0x005A);
PROVIDE(CAPD = 0x005B);
/************************************************************
* DAC12
************************************************************/
PROVIDE(DAC12_0CTL = 0x01C0);
PROVIDE(DAC12_1CTL = 0x01C2);
PROVIDE(DAC12_0DAT = 0x01C8);
PROVIDE(DAC12_1DAT = 0x01CA);
/************************************************************
* DMA_X
************************************************************/
PROVIDE(DMACTL0 = 0x0122);
PROVIDE(DMACTL1 = 0x0124);
PROVIDE(DMAIV = 0x0126);
PROVIDE(DMA0CTL = 0x01D0);
PROVIDE(DMA1CTL = 0x01DC);
PROVIDE(DMA2CTL = 0x01E8);
PROVIDE(DMA0SA = 0x01D2);
PROVIDE(DMA0SAL = 0x01D2);
PROVIDE(DMA0DA = 0x01D6);
PROVIDE(DMA0DAL = 0x01D6);
PROVIDE(DMA0SZ = 0x01DA);
PROVIDE(DMA1SA = 0x01DE);
PROVIDE(DMA1SAL = 0x01DE);
PROVIDE(DMA1DA = 0x01E2);
PROVIDE(DMA1DAL = 0x01E2);
PROVIDE(DMA1SZ = 0x01E6);
PROVIDE(DMA2SA = 0x01EA);
PROVIDE(DMA2SAL = 0x01EA);
PROVIDE(DMA2DA = 0x01EE);
PROVIDE(DMA2DAL = 0x01EE);
PROVIDE(DMA2SZ = 0x01F2);
/*************************************************************
* Flash Memory
*************************************************************/
PROVIDE(FCTL1 = 0x0128);
PROVIDE(FCTL2 = 0x012A);
PROVIDE(FCTL3 = 0x012C);
PROVIDE(FCTL4 = 0x01BE);
/************************************************************
* HARDWARE MULTIPLIER
************************************************************/
PROVIDE(MPY = 0x0130);
PROVIDE(MPYS = 0x0132);
PROVIDE(MAC = 0x0134);
PROVIDE(MACS = 0x0136);
PROVIDE(OP2 = 0x0138);
PROVIDE(RESLO = 0x013A);
PROVIDE(RESHI = 0x013C);
PROVIDE(SUMEXT = 0x013E);
/************************************************************
* DIGITAL I/O Port1/2 Pull up / Pull down Resistors
************************************************************/
PROVIDE(P1IN = 0x0020);
PROVIDE(P1OUT = 0x0021);
PROVIDE(P1DIR = 0x0022);
PROVIDE(P1IFG = 0x0023);
PROVIDE(P1IES = 0x0024);
PROVIDE(P1IE = 0x0025);
PROVIDE(P1SEL = 0x0026);
PROVIDE(P1REN = 0x0027);
PROVIDE(P2IN = 0x0028);
PROVIDE(P2OUT = 0x0029);
PROVIDE(P2DIR = 0x002A);
PROVIDE(P2IFG = 0x002B);
PROVIDE(P2IES = 0x002C);
PROVIDE(P2IE = 0x002D);
PROVIDE(P2SEL = 0x002E);
PROVIDE(P2REN = 0x002F);
/************************************************************
* DIGITAL I/O Port3/4 Pull up / Pull down Resistors
************************************************************/
PROVIDE(P3IN = 0x0018);
PROVIDE(P3OUT = 0x0019);
PROVIDE(P3DIR = 0x001A);
PROVIDE(P3SEL = 0x001B);
PROVIDE(P3REN = 0x0010);
PROVIDE(P4IN = 0x001C);
PROVIDE(P4OUT = 0x001D);
PROVIDE(P4DIR = 0x001E);
PROVIDE(P4SEL = 0x001F);
PROVIDE(P4REN = 0x0011);
/************************************************************
* DIGITAL I/O Port5/6 Pull up / Pull down Resistors
************************************************************/
PROVIDE(P5IN = 0x0030);
PROVIDE(P5OUT = 0x0031);
PROVIDE(P5DIR = 0x0032);
PROVIDE(P5SEL = 0x0033);
PROVIDE(P5REN = 0x0012);
PROVIDE(P6IN = 0x0034);
PROVIDE(P6OUT = 0x0035);
PROVIDE(P6DIR = 0x0036);
PROVIDE(P6SEL = 0x0037);
PROVIDE(P6REN = 0x0013);
/************************************************************
* DIGITAL I/O Port7/8 Pull up / Pull down Resistors
************************************************************/
PROVIDE(P7IN = 0x0038);
PROVIDE(P7OUT = 0x003A);
PROVIDE(P7DIR = 0x003C);
PROVIDE(P7SEL = 0x003E);
PROVIDE(P7REN = 0x0014);
PROVIDE(P8IN = 0x0039);
PROVIDE(P8OUT = 0x003B);
PROVIDE(P8DIR = 0x003D);
PROVIDE(P8SEL = 0x003F);
PROVIDE(P8REN = 0x0015);
PROVIDE(PAIN = 0x0038);
PROVIDE(PAOUT = 0x003A);
PROVIDE(PADIR = 0x003C);
PROVIDE(PASEL = 0x003E);
PROVIDE(PAREN = 0x0014);
/************************************************************
* Brown-Out, Supply Voltage Supervision (SVS)
************************************************************/
PROVIDE(SVSCTL = 0x0055);
/************************************************************
* Timer A3
************************************************************/
PROVIDE(TAIV = 0x012E);
PROVIDE(TACTL = 0x0160);
PROVIDE(TACCTL0 = 0x0162);
PROVIDE(TACCTL1 = 0x0164);
PROVIDE(TACCTL2 = 0x0166);
PROVIDE(TAR = 0x0170);
PROVIDE(TACCR0 = 0x0172);
PROVIDE(TACCR1 = 0x0174);
PROVIDE(TACCR2 = 0x0176);
/************************************************************
* Timer B7
************************************************************/
PROVIDE(TBIV = 0x011E);
PROVIDE(TBCTL = 0x0180);
PROVIDE(TBCCTL0 = 0x0182);
PROVIDE(TBCCTL1 = 0x0184);
PROVIDE(TBCCTL2 = 0x0186);
PROVIDE(TBCCTL3 = 0x0188);
PROVIDE(TBCCTL4 = 0x018A);
PROVIDE(TBCCTL5 = 0x018C);
PROVIDE(TBCCTL6 = 0x018E);
PROVIDE(TBR = 0x0190);
PROVIDE(TBCCR0 = 0x0192);
PROVIDE(TBCCR1 = 0x0194);
PROVIDE(TBCCR2 = 0x0196);
PROVIDE(TBCCR3 = 0x0198);
PROVIDE(TBCCR4 = 0x019A);
PROVIDE(TBCCR5 = 0x019C);
PROVIDE(TBCCR6 = 0x019E);
/************************************************************
* USCI
************************************************************/
PROVIDE(UCA0CTL0 = 0x0060);
PROVIDE(UCA0CTL1 = 0x0061);
PROVIDE(UCA0BR0 = 0x0062);
PROVIDE(UCA0BR1 = 0x0063);
PROVIDE(UCA0MCTL = 0x0064);
PROVIDE(UCA0STAT = 0x0065);
PROVIDE(UCA0RXBUF = 0x0066);
PROVIDE(UCA0TXBUF = 0x0067);
PROVIDE(UCA0ABCTL = 0x005D);
PROVIDE(UCA0IRTCTL = 0x005E);
PROVIDE(UCA0IRRCTL = 0x005F);
PROVIDE(UCB0CTL0 = 0x0068);
PROVIDE(UCB0CTL1 = 0x0069);
PROVIDE(UCB0BR0 = 0x006A);
PROVIDE(UCB0BR1 = 0x006B);
PROVIDE(UCB0I2CIE = 0x006C);
PROVIDE(UCB0STAT = 0x006D);
PROVIDE(UCB0RXBUF = 0x006E);
PROVIDE(UCB0TXBUF = 0x006F);
PROVIDE(UCB0I2COA = 0x0118);
PROVIDE(UCB0I2CSA = 0x011A);
PROVIDE(UCA1CTL0 = 0x00D0);
PROVIDE(UCA1CTL1 = 0x00D1);
PROVIDE(UCA1BR0 = 0x00D2);
PROVIDE(UCA1BR1 = 0x00D3);
PROVIDE(UCA1MCTL = 0x00D4);
PROVIDE(UCA1STAT = 0x00D5);
PROVIDE(UCA1RXBUF = 0x00D6);
PROVIDE(UCA1TXBUF = 0x00D7);
PROVIDE(UCA1ABCTL = 0x00CD);
PROVIDE(UCA1IRTCTL = 0x00CE);
PROVIDE(UCA1IRRCTL = 0x00CF);
PROVIDE(UCB1CTL0 = 0x00D8);
PROVIDE(UCB1CTL1 = 0x00D9);
PROVIDE(UCB1BR0 = 0x00DA);
PROVIDE(UCB1BR1 = 0x00DB);
PROVIDE(UCB1I2CIE = 0x00DC);
PROVIDE(UCB1STAT = 0x00DD);
PROVIDE(UCB1RXBUF = 0x00DE);
PROVIDE(UCB1TXBUF = 0x00DF);
PROVIDE(UCB1I2COA = 0x017C);
PROVIDE(UCB1I2CSA = 0x017E);
/************************************************************
* WATCHDOG TIMER
************************************************************/
PROVIDE(WDTCTL = 0x0120);
/************************************************************
* Calibration Data in Info Mem
************************************************************/
PROVIDE(TLV_CHECKSUM = 0x10C0);
PROVIDE(TLV_DCO_30_TAG = 0x10F6);
PROVIDE(TLV_DCO_30_LEN = 0x10F7);
PROVIDE(TLV_ADC12_1_TAG = 0x10DA);
PROVIDE(TLV_ADC12_1_LEN = 0x10DB);
/************************************************************
* Calibration Data in Info Mem
************************************************************/
PROVIDE(CALDCO_16MHZ = 0x10F8);
PROVIDE(CALBC1_16MHZ = 0x10F9);
PROVIDE(CALDCO_12MHZ = 0x10FA);
PROVIDE(CALBC1_12MHZ = 0x10FB);
PROVIDE(CALDCO_8MHZ = 0x10FC);
PROVIDE(CALBC1_8MHZ = 0x10FD);
PROVIDE(CALDCO_1MHZ = 0x10FE);
PROVIDE(CALBC1_1MHZ = 0x10FF);
/************************************************************
* Interrupt Vectors (offset from 0xFFC0)
************************************************************/
/************************************************************
* End of Modules
************************************************************/
View Git Blame Copy Permalink