mirror of
https://github.com/RIOT-OS/RIOT.git
synced 2024-12-29 04:50:03 +01:00
42 lines
1.8 KiB
Plaintext
42 lines
1.8 KiB
Plaintext
/**
|
|
* @defgroup boards_stm32l0538-disco STM32L0538-DISCO
|
|
* @ingroup boards
|
|
* @brief Support for the STM32L0538-DISCO board
|
|
|
|
### Introduction
|
|
|
|
The
|
|
[STM32L0538-DISCO](https://www.st.com/en/evaluation-tools/32l0538discovery.html)
|
|
discovery kit features an ultra low-power stm32l053c8t6 microcontroller with
|
|
64KB of FLASH and 8KB of RAM.
|
|
The board also provides an on-board 2.04\" E-paper display (not supported yet).
|
|
|
|
|
|
|
|
### Supported features
|
|
|
|
| Peripheral | Configuration |
|
|
|:--------------------- |:----------------------------------------------------------------------------------------- |
|
|
| TIMs | TIM2 |
|
|
| UARTs | USART1 on PA10 (RX), PA9 (TX) |
|
|
| SPIs | SPI1 on PB5 (MOSI), PB4 (MISO), PB3 (SCLK); SPI2 on PB15 (MOSI), PB14 (MISO), PB13 (SCLK) |
|
|
|
|
### Flashing the board
|
|
|
|
The board can be flashed using OpenOCD via the on-board ST-Link adapter.
|
|
Then use the following command:
|
|
|
|
make BOARD=stm32l0538-disco -C examples/hello-world flash
|
|
|
|
### STDIO
|
|
|
|
STDIO is connected to pins PA9 (TX) and PA10 (RX) so an USB to UART adapter is
|
|
required. Use the `term` target to open a terminal:
|
|
|
|
make BOARD=stm32l0538-disco -C examples/hello-world term
|
|
|
|
If an external ST-Link adapter is used, RX and TX pins can be directly connected
|
|
to it. In this case, STDIO is available on /dev/ttyACMx (Linux case).
|
|
|
|
*/
|