RIOT-OS/RIOT
RIOT-OS/RIOT
1
0
Fork 0
mirror of https://github.com/RIOT-OS/RIOT.git synced 2024-12-29 04:50:03 +01:00
Code Releases Activity
31c21e4165
RIOT/core/include/thread.h
Marian Buschsieweke 4c3e92f183
core: Made thread state an enum 
- Introduced enum type `thread_state_t` to replace preprocessor macros
- Moved thread states to `sched.h` for two reasons:
  a) Because of the interdependencies of `sched.h` and `thread.h` keeping it in
     `thread.h` would result in ugly code.
  b) Theses thread states are defined from the schedulers point of view, so it
     actually makes senses to have it defined there
2019-02-13 13:31:52 +01:00

523 lines
16 KiB
C
Raw Blame History

/*
* Copyright (C) 2014 Freie Universität Berlin
*
* This file is subject to the terms and conditions of the GNU Lesser
* General Public License v2.1. See the file LICENSE in the top level
* directory for more details.
*/
/**
* @defgroup core_thread Threading
* @ingroup core
* @brief Support for multi-threading
*
* Priorities
* ==========
*
* As RIOT is using a fixed priority @ref core_sched "scheduling algorithm",
* threads are scheduled based on their priority. The priority is fixed for
* every thread and specified during the thread's creation by the `priority`
* parameter.
*
* The lower the priority value, the higher the priority of the thread,
* with 0 being the highest possible priority.
*
* The lowest possible priority is @ref THREAD_PRIORITY_IDLE - 1.
*
* @note Assigning the same priority to two or more threads is usually not a
* good idea. A thread in RIOT may run until it yields (@ref
* thread_yield) or another thread with higher priority is runnable (@ref
* STATUS_ON_RUNQUEUE) again. Multiple threads with the same priority
* will therefore be scheduled cooperatively: when one of them is running,
* all others with the same priority depend on it to yield (or be interrupted
* by a thread with higher priority).
* This may make it difficult to determine when which of them gets
* scheduled and how much CPU time they will get. In most applications,
* the number of threads in application is significantly smaller than the
* number of available priorities, so assigning distinct priorities per
* thread should not be a problem. Only assign the same priority to
* multiple threads if you know what you are doing!
*
* Thread Behavior
* ===============
* In addition to the priority, flags can be used when creating a thread to
* alter the thread's behavior after creation. The following flags are available:
*
* Flags | Description
* ----------------------------- | --------------------------------------------------
* @ref THREAD_CREATE_SLEEPING | the thread will sleep until woken up manually
* @ref THREAD_CREATE_WOUT_YIELD | the thread might not run immediately after creation
* @ref THREAD_CREATE_STACKTEST | measures the stack's memory usage
*
* Thread creation
* ===============
* Creating a new thread is internally done in two steps:
* 1. the new thread's stack is initialized depending on the platform
* 2. the new thread is added to the scheduler and the scheduler is run (if not
* indicated otherwise)
*
* @note Creating threads from within an ISR is currently supported, however it
* is considered to be a bad programming practice and we strongly
* discourage you from doing so.
*
* Usage
* -----
* ~~~~~~~~~~~~~~~~~~~~~~~~ {.c}
* #include "thread.h"
*
* char rcv_thread_stack[THREAD_STACKSIZE_MAIN];
*
* void *rcv_thread(void *arg)
* {
* (void) arg;
* msg_t m;
*
* while (1) {
* msg_receive(&m);
* printf("Got msg from %" PRIkernel_pid "\n", m.sender_pid);
* }
*
* return NULL;
* }
*
* int main(void)
* {
* thread_create(rcv_thread_stack, sizeof(rcv_thread_stack),
* THREAD_PRIORITY_MAIN - 1, THREAD_CREATE_STACKTEST,
* rcv_thread, NULL, "rcv_thread");
* }
* ~~~~~~~~~~~~~~~~~~~~~~~~
*
* Reading from the top down, you can see that first, stack memory for our thread
* `rcv_thread` is preallocated, followed by an implementation of the thread's
* function. Communication between threads is done using @ref core_msg. In this
* case, `rcv_thread` will print the process id of each thread that sent a
* message to `rcv_thread`.
*
* After it has been properly defined, `rcv_thread` is created with a call to
* @ref thread_create() in `main()`. It is assigned a priority of
* `THREAD_PRIORITY_MAIN - 1`, i.e. a slightly *higher* priority than the main
* thread. Since neither the `THREAD_CREATE_SLEEPING` nor the
* `THREAD_CREATE_WOUT_YIELD` flag is set, `rcv_thread` will be executed
* immediately.
*
* @note If the messages to the thread are sent using @ref msg_try_send() or
* from an ISR, activate your thread's message queue by calling
* @ref msg_init_queue() to prevent messages from being dropped when
* they can't be handled right away. The same applies if you'd like
* msg_send() to your thread to be non-blocking. For more details, see
* @ref core_msg "the Messaging documentation".
*
* @{
*
* @file
* @brief Threading API
*
* @author Kaspar Schleiser <kaspar@schleiser.de>
*/
#ifndef THREAD_H
#define THREAD_H
#include "clist.h"
#include "cib.h"
#include "msg.h"
#include "cpu_conf.h"
#include "sched.h"
#ifdef MODULE_CORE_THREAD_FLAGS
#include "thread_flags.h"
#endif
#ifdef __cplusplus
extern "C" {
#endif
/**
* @brief Prototype for a thread entry function
*/
typedef void *(*thread_task_func_t)(void *arg);
/**
* @brief @c thread_t holds thread's context data.
*/
struct _thread {
char *sp; /**< thread's stack pointer */
thread_state_t status; /**< thread's status */
uint8_t priority; /**< thread's priority */
kernel_pid_t pid; /**< thread's process id */
#if defined(MODULE_CORE_THREAD_FLAGS) || defined(DOXYGEN)
thread_flags_t flags; /**< currently set flags */
#endif
clist_node_t rq_entry; /**< run queue entry */
#if defined(MODULE_CORE_MSG) || defined(MODULE_CORE_THREAD_FLAGS) \
|| defined(MODULE_CORE_MBOX) || defined(DOXYGEN)
void *wait_data; /**< used by msg, mbox and thread
flags */
#endif
#if defined(MODULE_CORE_MSG) || defined(DOXYGEN)
list_node_t msg_waiters; /**< threads waiting for their message
to be delivered to this thread
(i.e. all blocked sends) */
cib_t msg_queue; /**< index of this [thread's message queue]
(thread_t::msg_array), if any */
msg_t *msg_array; /**< memory holding messages sent
to this thread's message queue */
#endif
#if defined(DEVELHELP) || defined(SCHED_TEST_STACK) \
|| defined(MODULE_MPU_STACK_GUARD) || defined(DOXYGEN)
char *stack_start; /**< thread's stack start address */
#endif
#if defined(DEVELHELP) || defined(DOXYGEN)
const char *name; /**< thread's name */
int stack_size; /**< thread's stack size */
#endif
#ifdef HAVE_THREAD_ARCH_T
thread_arch_t arch; /**< architecture dependent part */
#endif
};
/**
* @def THREAD_STACKSIZE_DEFAULT
* @brief A reasonable default stack size that will suffice most smaller tasks
*
* @note This value must be defined by the CPU specific implementation, please
* take a look at @c cpu/$CPU/include/cpu_conf.h
*/
#ifndef THREAD_STACKSIZE_DEFAULT
#error THREAD_STACKSIZE_DEFAULT must be defined per CPU
#endif
#ifdef DOXYGEN
#define THREAD_STACKSIZE_DEFAULT
#endif
/**
* @def THREAD_STACKSIZE_IDLE
* @brief Size of the idle task's stack in bytes
*
* @note This value must be defined by the CPU specific implementation, please
* take a look at @c cpu/$CPU/include/cpu_conf.h
*/
#ifndef THREAD_STACKSIZE_IDLE
#error THREAD_STACKSIZE_IDLE must be defined per CPU
#endif
#ifdef DOXYGEN
#define THREAD_STACKSIZE_IDLE
#endif
/**
* @def THREAD_EXTRA_STACKSIZE_PRINTF
* @brief Size of the task's printf stack in bytes
*
* @note This value must be defined by the CPU specific implementation, please
* take a look at @c cpu/$CPU/include/cpu_conf.h
*/
#ifndef THREAD_EXTRA_STACKSIZE_PRINTF
#error THREAD_EXTRA_STACKSIZE_PRINTF must be defined per CPU
#endif
#ifdef DOXYGEN
#define THREAD_EXTRA_STACKSIZE_PRINTF
#endif
/**
* @def THREAD_STACKSIZE_MAIN
* @brief Size of the main task's stack in bytes
*/
#ifndef THREAD_STACKSIZE_MAIN
#define THREAD_STACKSIZE_MAIN (THREAD_STACKSIZE_DEFAULT + THREAD_EXTRA_STACKSIZE_PRINTF)
#endif
/**
* @brief Large stack size
*/
#ifndef THREAD_STACKSIZE_LARGE
#define THREAD_STACKSIZE_LARGE (THREAD_STACKSIZE_MEDIUM * 2)
#endif
/**
* @brief Medium stack size
*/
#ifndef THREAD_STACKSIZE_MEDIUM
#define THREAD_STACKSIZE_MEDIUM THREAD_STACKSIZE_DEFAULT
#endif
/**
* @brief Small stack size
*/
#ifndef THREAD_STACKSIZE_SMALL
#define THREAD_STACKSIZE_SMALL (THREAD_STACKSIZE_MEDIUM / 2)
#endif
/**
* @brief Tiny stack size
*/
#ifndef THREAD_STACKSIZE_TINY
#define THREAD_STACKSIZE_TINY (THREAD_STACKSIZE_MEDIUM / 4)
#endif
/**
* @brief Minimum stack size
*/
#ifndef THREAD_STACKSIZE_MINIMUM
#define THREAD_STACKSIZE_MINIMUM (sizeof(thread_t))
#endif
/**
* @def THREAD_PRIORITY_MIN
* @brief Least priority a thread can have
*/
#define THREAD_PRIORITY_MIN (SCHED_PRIO_LEVELS-1)
/**
* @def THREAD_PRIORITY_IDLE
* @brief Priority of the idle thread
*/
#define THREAD_PRIORITY_IDLE (THREAD_PRIORITY_MIN)
/**
* @def THREAD_PRIORITY_MAIN
* @brief Priority of the main thread
*/
#define THREAD_PRIORITY_MAIN (THREAD_PRIORITY_MIN - (SCHED_PRIO_LEVELS/2))
/**
* @name Optional flags for controlling a threads initial state
* @{
*/
/**
* @brief Set the new thread to sleeping. It must be woken up manually.
**/
#define THREAD_CREATE_SLEEPING (1)
/**
* @brief Currently not implemented
*/
#define THREAD_AUTO_FREE (2)
/**
* @brief Do not automatically call thread_yield() after creation: the newly
* created thread might not run immediately. Purely for optimization.
* Any other context switch (i.e. an interrupt) can still start the
* thread at any time!
*/
#define THREAD_CREATE_WOUT_YIELD (4)
/**
* @brief Write markers into the thread's stack to measure stack usage (for
* debugging and profiling purposes)
*/
#define THREAD_CREATE_STACKTEST (8)
/** @} */
/**
* @brief Creates a new thread.
*
* For an in-depth discussion of thread priorities, behavior and and flags,
* see @ref core_thread.
*
* @note Avoid assigning the same priority to two or more threads.
* @note Creating threads from within an ISR is currently supported, however it
* is considered to be a bad programming practice and we strongly
* discourage you from doing so.
*
* @param[out] stack start address of the preallocated stack memory
* @param[in] stacksize the size of the thread's stack in bytes
* @param[in] priority priority of the new thread, lower mean higher priority
* @param[in] flags optional flags for the creation of the new thread
* @param[in] task_func pointer to the code that is executed in the new thread
* @param[in] arg the argument to the function
* @param[in] name a human readable descriptor for the thread
*
* @return PID of newly created task on success
* @return -EINVAL, if @p priority is greater than or equal to
* @ref SCHED_PRIO_LEVELS
* @return -EOVERFLOW, if there are too many threads running already
*/
kernel_pid_t thread_create(char *stack,
int stacksize,
char priority,
int flags,
thread_task_func_t task_func,
void *arg,
const char *name);
/**
* @brief Retreive a thread control block by PID.
* @details This is a bound-checked variant of accessing `sched_threads[pid]` directly.
* If you know that the PID is valid, then don't use this function.
* @param[in] pid Thread to retreive.
* @return `NULL` if the PID is invalid or there is no such thread.
*/
volatile thread_t *thread_get(kernel_pid_t pid);
/**
* @brief Returns the status of a process
*
* @param[in] pid the PID of the thread to get the status from
*
* @return status of the thread
* @return `STATUS_NOT_FOUND` if pid is unknown
*/
int thread_getstatus(kernel_pid_t pid);
/**
* @brief Puts the current thread into sleep mode. Has to be woken up externally.
*/
void thread_sleep(void);
/**
* @brief Lets current thread yield.
*
* @details The current thread will resume operation immediately,
* if there is no other ready thread with the same or a higher priority.
*
* Differently from thread_yield_higher() the current thread will be put to the
* end of the thread's in its priority class.
*
* @see thread_yield_higher()
*/
void thread_yield(void);
/**
* @brief Lets current thread yield in favor of a higher prioritized thread.
*
* @details The current thread will resume operation immediately,
* if there is no other ready thread with a higher priority.
*
* Differently from thread_yield() the current thread will be scheduled next
* in its own priority class, i.e. it stays the first thread in its
* priority class.
*
* @see thread_yield()
*/
void thread_yield_higher(void);
/**
* @brief Wakes up a sleeping thread.
*
* @param[in] pid the PID of the thread to be woken up
*
* @return `1` on success
* @return `STATUS_NOT_FOUND` if pid is unknown or not sleeping
*/
int thread_wakeup(kernel_pid_t pid);
/**
* @brief Returns the process ID of the currently running thread
*
* @return obviously you are not a golfer.
*/
static inline kernel_pid_t thread_getpid(void)
{
extern volatile kernel_pid_t sched_active_pid;
return sched_active_pid;
}
/**
* @brief Gets called upon thread creation to set CPU registers
*
* @param[in] task_func First function to call within the thread
* @param[in] arg Argument to supply to task_func
* @param[in] stack_start Start address of the stack
* @param[in] stack_size Stack size
*
* @return stack pointer
*/
char *thread_stack_init(thread_task_func_t task_func, void *arg, void *stack_start, int stack_size);
/**
* @brief Add thread to list, sorted by priority (internal)
*
* This will add @p thread to @p list sorted by the thread priority.
* It reuses the thread's rq_entry field.
* Used internally by msg and mutex implementations.
*
* @note Only use for threads *not on any runqueue* and with interrupts
* disabled.
*
* @param[in] list ptr to list root node
* @param[in] thread thread to add
*/
void thread_add_to_list(list_node_t *list, thread_t *thread);
/**
* @brief Returns the name of a process
*
* @note when compiling without DEVELHELP, this *always* returns NULL!
*
* @param[in] pid the PID of the thread to get the name from
*
* @return the threads name
* @return `NULL` if pid is unknown
*/
const char *thread_getname(kernel_pid_t pid);
#ifdef DEVELHELP
/**
* @brief Measures the stack usage of a stack
*
* Only works if the thread was created with the flag THREAD_CREATE_STACKTEST.
*
* @param[in] stack the stack you want to measure. try `sched_active_thread->stack_start`
*
* @return the amount of unused space of the thread's stack
*/
uintptr_t thread_measure_stack_free(char *stack);
#endif /* DEVELHELP */
/**
* @brief Get the number of bytes used on the ISR stack
*/
int thread_isr_stack_usage(void);
/**
* @brief Get the current ISR stack pointer
*/
void *thread_isr_stack_pointer(void);
/**
* @brief Get the start of the ISR stack
*/
void *thread_isr_stack_start(void);
/**
* @brief Print the current stack to stdout
*/
void thread_stack_print(void);
/**
* @brief Prints human readable, ps-like thread information for debugging purposes
*/
void thread_print_stack(void);
/**
* @brief Checks if a thread has an initialized message queue
*
* @see @ref msg_init_queue()
*
* @param[in] thread The thread to check for
*
* @return `== 0`, if @p thread has no initialized message queue
* @return `!= 0`, if @p thread has its message queue initialized
*/
static inline int thread_has_msg_queue(const volatile struct _thread *thread)
{
#if defined(MODULE_CORE_MSG) || defined(DOXYGEN)
return (thread->msg_array != NULL);
#else
(void)thread;
return 0;
#endif
}
#ifdef __cplusplus
}
#endif
/** @} */
#endif /* THREAD_H */
View Git Blame Copy Permalink