mirror of
https://github.com/RIOT-OS/RIOT.git
synced 2024-12-29 04:50:03 +01:00
29ec91fed3
ST's UM1724 user manual provides pinout diagrams for many Nucleo-64 boards. This adds them to the doc for easy of use.
92 lines
3.5 KiB
Plaintext
92 lines
3.5 KiB
Plaintext
/**
|
|
@defgroup boards_nucleo-f302r8 STM32 Nucleo-F302R8
|
|
@ingroup boards_common_nucleo64
|
|
@brief Support for the STM32 Nucleo-F302R8
|
|
|
|
## Overview
|
|
|
|
The [Nucleo-F302R8](http://www.st.com/en/evaluation-tools/nucleo-f302r8.html)
|
|
is a board from ST's Nucleo family supporting a ARM Cortex-M4
|
|
[STM32F302R8](http://www.st.com/en/microcontrollers/stm32f302r8.html)
|
|
microcontroller with 16KiB of RAM and 64KiB of Flash.
|
|
|
|
## Hardware
|
|
|
|
|
|
|
|
## Pinout
|
|
|
|
@image html pinouts/nucleo-f302r8.svg "Pinout for the nucleo-f302r8" width=50%
|
|
|
|
### MCU
|
|
| MCU | STM32F302R8 |
|
|
|:---------- |:--------------------- |
|
|
| Family | ARM Cortex-M4 |
|
|
| Vendor | ST Microelectronics |
|
|
| RAM | 16KiB |
|
|
| Flash | 64KiB |
|
|
| Frequency | up to 72MHz |
|
|
| FPU | yes |
|
|
| Timers | 9 (5x 16-bit, 1x 32-bit [TIM2], 2x watchdog, 1x systick) |
|
|
| ADCs | 1 with selectable resolution (6,8,10,12-bit) |
|
|
| UARTs | 3 |
|
|
| SPIs | 2 |
|
|
| I2Cs | 3 |
|
|
| RTC | 1 |
|
|
| CAN | 1 |
|
|
| USB | 1 |
|
|
| Vcc | 2.0V - 3.6V |
|
|
| Datasheet | [Datasheet](http://www.st.com/resource/en/datasheet/stm32f302r8.pdf) |
|
|
| Reference Manual | [Reference Manual](http://www.st.com/resource/en/reference_manual/dm00094349.pdf) |
|
|
| Programming Manual | [Programming Manual](http://www.st.com/resource/en/programming_manual/dm00046982.pdf) |
|
|
| Board Manual | [Board Manual](http://www.st.com/st-web-ui/static/active/en/resource/technical/document/user_manual/DM00105823.pdf) |
|
|
|
|
|
|
## Implementation Status
|
|
|
|
| Device | ID | Supported | Comments |
|
|
|:------------- |:------------- |:------------- |:------------- |
|
|
| MCU | STM32F302R8 | partly | Energy saving modes not fully utilized |
|
|
| Low-level driver | GPIO | yes | |
|
|
| | PWM | one PWM (D5) | |
|
|
| | UART | three UART | |
|
|
| | I2C | no | |
|
|
| | SPI | one SPI (SPI2) | |
|
|
| | USB | no | |
|
|
| | Timer | one 32 timer (TIM2) | |
|
|
|
|
|
|
## Flashing the device
|
|
|
|
### Flashing the Board Using OpenOCD
|
|
|
|
The ST Nucleo-F302R8 board includes an on-board ST-LINK V2-1 programmer.
|
|
The easiest way to program the board is to use OpenOCD. Once you have
|
|
installed OpenOCD (look [here](https://github.com/RIOT-OS/RIOT/wiki/OpenOCD)
|
|
for installation instructions), you can flash the board simply by typing
|
|
|
|
```
|
|
make BOARD=nucleo-f302r8 flash
|
|
```
|
|
and debug via GDB by simply typing
|
|
```
|
|
make BOARD=nucleo-f302r8 debug
|
|
```
|
|
### Flashing the Board Using ST-LINK Removable Media
|
|
|
|
On-board ST-LINK programmer provides via composite USB device removable media.
|
|
Copying the HEX file causes reprogramming of the board. This task
|
|
could be performed manually; however, the cpy2remed (copy to removable
|
|
media) PROGRAMMER script does this automatically. To program board in
|
|
this manner, use the command:
|
|
```
|
|
make BOARD=nucleo-f302r8 PROGRAMMER=cpy2remed flash
|
|
```
|
|
@note This PROGRAMMER was tested using ST-LINK firmware 2.37.26. Firmware updates
|
|
could be found on [this STM webpage](https://www.st.com/en/development-tools/stsw-link007.html).
|
|
|
|
## Supported Toolchains
|
|
For using the ST Nucleo-F302R8 board we strongly recommend the usage of
|
|
the [GNU Tools for ARM Embedded Processors](https://launchpad.net/gcc-arm-embedded) toolchain.
|
|
*/
|