RIOT-OS/RIOT
RIOT-OS/RIOT
1
0
Fork 0
mirror of https://github.com/RIOT-OS/RIOT.git synced 2024-12-29 04:50:03 +01:00
Code Releases Activity
2ff280d57f
RIOT/tests/driver_xbee
History
Hauke Petersen e44d741e31 tests/driver_xbee: remove redundant xbee config
2017-04-28 15:43:43 +02:00
..
main.c gnrc: use new netreg helper functions everywhere 2016-10-25 18:47:30 +02:00
Makefile tests/driver_xbee: remove redundant xbee config 2017-04-28 15:43:43 +02:00
README.md sys/uart_stdio: rename STDIO -> UART_STDIO_DEV, move to header 2016-03-11 12:04:00 +01:00

README.md

About

This is a manual test application for testing the Xbee S1 network device driver.

For running this test, you need to connect the following pins of a Xbee S1 module to your board:

  • UART RX
  • UART TX
  • VCC (3V3)
  • GND

NOTE: when you use an Arduino Xbee shield, the Xbee module is connected to the same UART as RIOTs standard out. In this case you must redefine UART_STDIO_DEV to another UART interface in the board.h and connect a UART-to-USB adapter to that UART.

Usage

For testing the Xbee driver you can use the netif shell commands that are included in this application.