1
0
mirror of https://github.com/RIOT-OS/RIOT.git synced 2024-12-29 04:50:03 +01:00
RIOT/cpu/stm32_common/include/periph_cpu_common.h

218 lines
6.0 KiB
C

/*
* Copyright (C) 2016 Freie Universität Berlin
*
* This file is subject to the terms and conditions of the GNU Lesser
* General Public License v2.1. See the file LICENSE in the top level
* directory for more details.
*/
/**
* @ingroup cpu_stm32_common
* @{
*
* @file
* @brief Shared CPU specific definitions for the STM32 family
*
* @author Hauke Petersen <hauke.petersen@fu-berlin.de>
*/
#ifndef PERIPH_CPU_COMMON_H
#define PERIPH_CPU_COMMON_H
#include "cpu.h"
#ifdef __cplusplus
extern "C" {
#endif
/**
* @brief Length of the CPU_ID in octets
*/
#define CPUID_LEN (12U)
/**
* @brief All STM timers have 4 capture-compare channels
*/
#define TIMER_CHAN (4U)
/**
* @brief Use the shared SPI functions
* @{
*/
#define PERIPH_SPI_NEEDS_TRANSFER_BYTES
#define PERIPH_SPI_NEEDS_TRANSFER_REG
#define PERIPH_SPI_NEEDS_TRANSFER_REGS
/** @} */
/**
* @brief Number of usable low power modes
*/
#if defined(CPU_FAM_STM32F1) || defined(CPU_FAM_STM32F2) || defined(CPU_FAM_STM32F4) || defined(DOXYGEN)
#define PM_NUM_MODES (2U)
#endif
/**
* @brief Available peripheral buses
*/
typedef enum {
APB1, /**< APB1 bus */
APB2, /**< APB2 bus */
#if defined(CPU_FAM_STM32L0) || defined(CPU_FAM_STM32L1) || defined(CPU_FAM_STM32F1)\
|| defined(CPU_FAM_STM32F0) || defined(CPU_FAM_STM32F3)
AHB, /**< AHB bus */
#elif defined(CPU_FAM_STM32F2) || defined(CPU_FAM_STM32F4)
AHB1, /**< AHB1 bus */
AHB2, /**< AHB2 bus */
AHB3 /**< AHB3 bus */
#else
#warning "unsupported stm32XX family"
#endif
} bus_t;
#ifndef DOXYGEN
/**
* @brief Overwrite the default gpio_t type definition
* @{
*/
#define HAVE_GPIO_T
typedef uint32_t gpio_t;
/** @} */
#endif
/**
* @brief Definition of a fitting UNDEF value
*/
#define GPIO_UNDEF (0xffffffff)
/**
* @brief Define a CPU specific GPIO pin generator macro
*/
#define GPIO_PIN(x, y) ((GPIOA_BASE + (x << 10)) | y)
/**
* @brief Available MUX values for configuring a pin's alternate function
*/
typedef enum {
#ifdef CPU_FAM_STM32F1
GPIO_AF_OUT_PP = 0xb, /**< alternate function output - push-pull */
GPIO_AF_OUT_OD = 0xf, /**< alternate function output - open-drain */
#else
GPIO_AF0 = 0, /**< use alternate function 0 */
GPIO_AF1, /**< use alternate function 1 */
GPIO_AF2, /**< use alternate function 2 */
GPIO_AF3, /**< use alternate function 3 */
#ifndef CPU_FAM_STM32F0
GPIO_AF4, /**< use alternate function 4 */
GPIO_AF5, /**< use alternate function 5 */
GPIO_AF6, /**< use alternate function 6 */
GPIO_AF7, /**< use alternate function 7 */
GPIO_AF8, /**< use alternate function 8 */
GPIO_AF9, /**< use alternate function 9 */
GPIO_AF10, /**< use alternate function 10 */
GPIO_AF11, /**< use alternate function 11 */
GPIO_AF12, /**< use alternate function 12 */
GPIO_AF13, /**< use alternate function 13 */
GPIO_AF14, /**< use alternate function 14 */
GPIO_AF15 /**< use alternate function 15 */
#endif
#endif
} gpio_af_t;
/**
* @brief Timer configuration
*/
typedef struct {
TIM_TypeDef *dev; /**< timer device */
uint32_t max; /**< maximum value to count to (16/32 bit) */
uint32_t rcc_mask; /**< corresponding bit in the RCC register */
uint8_t bus; /**< APBx bus the timer is clock from */
uint8_t irqn; /**< global IRQ channel */
} timer_conf_t;
/**
* @brief PWM channel
*/
typedef struct {
gpio_t pin; /**< GPIO pin mapped to this channel */
uint8_t cc_chan; /**< capture compare channel used */
} pwm_chan_t;
/**
* @brief PWM configuration
*/
typedef struct {
TIM_TypeDef *dev; /**< Timer used */
uint32_t rcc_mask; /**< bit in clock enable register */
pwm_chan_t chan[TIMER_CHAN]; /**< channel mapping, set to {GPIO_UNDEF, 0}
* if not used */
gpio_af_t af; /**< alternate function used */
uint8_t bus; /**< APB bus */
} pwm_conf_t;
/**
* @brief Structure for UART configuration data
*/
typedef struct {
USART_TypeDef *dev; /**< UART device base register address */
uint32_t rcc_mask; /**< bit in clock enable register */
gpio_t rx_pin; /**< RX pin */
gpio_t tx_pin; /**< TX pin */
#ifndef CPU_FAM_STM32F1
gpio_af_t rx_af; /**< alternate function for RX pin */
gpio_af_t tx_af; /**< alternate function for TX pin */
#endif
uint8_t bus; /**< APB bus */
uint8_t irqn; /**< IRQ channel */
#if 0 /* TODO */
uint8_t dma_stream; /**< DMA stream used for TX */
uint8_t dma_chan; /**< DMA channel used for TX */
#endif
} uart_conf_t;
/**
* @brief Get the actual bus clock frequency for the APB buses
*
* @param[in] bus target APBx bus
*
* @return bus clock frequency in Hz
*/
uint32_t periph_apb_clk(uint8_t bus);
/**
* @brief Enable the given peripheral clock
*
* @param[in] bus bus the peripheral is connected to
* @param[in] mask bit in the RCC enable register
*/
void periph_clk_en(bus_t bus, uint32_t mask);
/**
* @brief Disable the given peripheral clock
*
* @param[in] bus bus the peripheral is connected to
* @param[in] mask bit in the RCC enable register
*/
void periph_clk_dis(bus_t bus, uint32_t mask);
/**
* @brief Configure the alternate function for the given pin
*
* @param[in] pin pin to configure
* @param[in] af alternate function to use
*/
void gpio_init_af(gpio_t pin, gpio_af_t af);
/**
* @brief Configure the given pin to be used as ADC input
*
* @param[in] pin pin to configure
*/
void gpio_init_analog(gpio_t pin);
#ifdef __cplusplus
}
#endif
#endif /* PERIPH_CPU_COMMON_H */
/** @} */