mirror of
https://github.com/RIOT-OS/RIOT.git
synced 2024-12-29 04:50:03 +01:00
0ae471116e
The pins P5.2, P5.1, P5.3 configured as SPI pins are only routed to USART1 and not to USART0, but previously USART0 was configured as peripheral backing the bus. This fixes the peripheral configuration by changing it to USART1. This is quite unfortunate as USART1 is also used to provide the UART interface used for `stdio`. Hence, one can either use `stdio` or SPI. A feature conflict between UART and SPI has therefore been added. Note that while it would be possible to use P3.2, P3.1, P3.3 to provide SPI with USART0, this would not work in practise: P3.1 and P3.3 are connected to the CC1020 transceiver. Switching to P3.4/P3.5 for UART to provide it using USART 0 would also resolve the resource conflict. However, these pins are not available via any of the header and would require soldering the UART<->USB adapter directly to the pins of the MCU chip on the PCB. It is therefore much more user friendly to keep the UART bus backed by USART1 to use pins P3.6 and P3.7 that are easily accessible via the pin header. |
||
|---|---|---|
| .. | ||
| include | ||
| doc.txt | ||
| Kconfig | ||
| Makefile | ||
| Makefile.dep | ||
| Makefile.features | ||
| Makefile.include | ||