RIOT-OS/RIOT
RIOT-OS/RIOT
1
0
Fork 0
mirror of https://github.com/RIOT-OS/RIOT.git synced 2024-12-29 04:50:03 +01:00
Code Releases Activity
18910cf4e2
RIOT/drivers/Makefile.dep
Marian Buschsieweke 972367432a
drivers/cc110x: Rewrite of the cc110x driver 
The cc110x driver has been re-written from scratch to overcome the limitations
of the old driver. The main motivation of the rewrite was to achieve better
maintainability by a detailed documentation, reduce the complexity and the
overhead of the SPI communication with the device, and to allow to
simultaneously use transceivers with different configuration regarding the used
base band, the channel bandwidth, the modulation rate, and the channel map.

Features of this driver include:

- Support for the CC1100, CC1101, and the CC1100e sub-gigahertz transceivers.
- Detailed documentation of every aspect of this driver.
- An easy to use configuration API that allows setting the transceiver
  configuration (modulation rate, channel bandwidth, base frequency) and the
  channel map.
- Fast channel hopping by pre-calibration of the channels during device
  configuration (so that no calibration is needed during hopping).
- Simplified SPI communication: Only during start-up the MCU has to wait
  for the transceiver to be ready (for the power regulators and the crystal
  to stabilize). The old driver did this for every SPI transfer, which
  resulted in complex communication code. This driver will wait on start up
  for the transceiver to power up and then use RIOT's SPI API like every other
  driver. (Not only the data sheet states that this is fine, it also proved to
  be reliable in practise.)
- Greatly reduced latency: The RTT on the old driver (@150 kbps data rate) was
  about 16ms, the new driver (@250 kbps data rate) has as RTT of ~3ms
  (depending on SPI clock and on CPU performance) (measured with ping6).
- Increased reliability: The preamble size and the sync word size have been
  doubled compared to the old driver (preamble: 8 bytes instead of 4,
  sync word: 4 byte instead of 2). The new values are the once recommended by
  the data sheet for reliable communication.
- Basic diagnostic during driver initialization to detect common issues as
  SPI communication issues and GDO pin configuration/wiring issues.
- TX power configuration with netdev_driver_t::set() API-integration
- Calls to netdev_driver_t::send() block until the transmission has completed
  to ease the use of the API (implemented without busy waiting, so that the
  MCU can enter lower power states or other threads can be executed).
2019-08-20 16:32:11 +02:00

559 lines
12 KiB
Makefile
Raw Blame History

# driver dependencies (in alphabetical order)
ifneq (,$(filter ad7746,$(USEMODULE)))
FEATURES_REQUIRED += periph_i2c
endif
ifneq (,$(filter adc%1c,$(USEMODULE)))
FEATURES_REQUIRED += periph_gpio_irq
FEATURES_REQUIRED += periph_i2c
USEMODULE += adcxx1c
endif
ifneq (,$(filter ads101%,$(USEMODULE)))
FEATURES_REQUIRED += periph_gpio_irq
FEATURES_REQUIRED += periph_i2c
USEMODULE += ads101x
USEMODULE += xtimer
endif
ifneq (,$(filter adt7310,$(USEMODULE)))
FEATURES_REQUIRED += periph_spi
endif
ifneq (,$(filter adxl345,$(USEMODULE)))
FEATURES_REQUIRED += periph_i2c
endif
ifneq (,$(filter apa102,$(USEMODULE)))
FEATURES_REQUIRED += periph_gpio
endif
ifneq (,$(filter at,$(USEMODULE)))
FEATURES_REQUIRED += periph_uart
USEMODULE += fmt
USEMODULE += isrpipe
USEMODULE += isrpipe_read_timeout
endif
ifneq (,$(filter at30tse75x,$(USEMODULE)))
USEMODULE += xtimer
FEATURES_REQUIRED += periph_i2c
endif
ifneq (,$(filter at86rf2%,$(USEMODULE)))
USEMODULE += at86rf2xx
USEMODULE += xtimer
USEMODULE += luid
USEMODULE += netif
USEMODULE += ieee802154
USEMODULE += netdev_ieee802154
FEATURES_REQUIRED += periph_gpio
FEATURES_REQUIRED += periph_gpio_irq
FEATURES_REQUIRED += periph_spi
endif
ifneq (,$(filter ata8520e,$(USEMODULE)))
USEMODULE += xtimer
USEMODULE += fmt
FEATURES_REQUIRED += periph_gpio
FEATURES_REQUIRED += periph_gpio_irq
FEATURES_REQUIRED += periph_spi
endif
ifneq (,$(filter bh1750fvi,$(USEMODULE)))
USEMODULE += xtimer
FEATURES_REQUIRED += periph_i2c
endif
ifneq (,$(filter bmp180,$(USEMODULE)))
FEATURES_REQUIRED += periph_i2c
USEMODULE += xtimer
endif
ifneq (,$(filter bmx055,$(USEMODULE)))
FEATURES_REQUIRED += periph_i2c
endif
ifneq (,$(filter bm%280,$(USEMODULE)))
FEATURES_REQUIRED += periph_i2c
USEMODULE += xtimer
USEMODULE += bmx280
endif
ifneq (,$(filter cc110%,$(USEMODULE)))
USEMODULE += cc110x
USEMODULE += cc1xxx_common
USEMODULE += luid
USEMODULE += netif
USEMODULE += xtimer
FEATURES_REQUIRED += periph_gpio
FEATURES_REQUIRED += periph_gpio_irq
FEATURES_REQUIRED += periph_spi
ifneq (,$(filter gnrc_ipv6,$(USEMODULE)))
USEMODULE += gnrc_sixlowpan
endif
endif
ifneq (,$(filter cc2420,$(USEMODULE)))
USEMODULE += xtimer
USEMODULE += luid
USEMODULE += netif
USEMODULE += ieee802154
USEMODULE += netdev_ieee802154
FEATURES_REQUIRED += periph_gpio
FEATURES_REQUIRED += periph_gpio_irq
FEATURES_REQUIRED += periph_spi
endif
ifneq (,$(filter ccs811_full,$(USEMODULE)))
FEATURES_REQUIRED += periph_gpio_irq
USEMODULE += ccs811
endif
ifneq (,$(filter ccs811,$(USEMODULE)))
FEATURES_REQUIRED += periph_gpio
FEATURES_REQUIRED += periph_i2c
USEMODULE += xtimer
endif
ifneq (,$(filter dht,$(USEMODULE)))
USEMODULE += xtimer
FEATURES_REQUIRED += periph_gpio
endif
ifneq (,$(filter ds1307,$(USEMODULE)))
FEATURES_REQUIRED += periph_i2c
endif
ifneq (,$(filter ds3234,$(USEMODULE)))
FEATURES_REQUIRED += periph_spi
endif
ifneq (,$(filter ds75lx,$(USEMODULE)))
USEMODULE += xtimer
FEATURES_REQUIRED += periph_i2c
endif
ifneq (,$(filter dsp0401,$(USEMODULE)))
USEMODULE += xtimer
FEATURES_REQUIRED += periph_gpio
FEATURES_REQUIRED += periph_pwm
endif
ifneq (,$(filter dynamixel,$(USEMODULE)))
USEMODULE += uart_half_duplex
endif
ifneq (,$(filter ds18,$(USEMODULE)))
USEMODULE += xtimer
FEATURES_REQUIRED += periph_gpio
endif
ifneq (,$(filter enc28j60,$(USEMODULE)))
FEATURES_REQUIRED += periph_gpio
FEATURES_REQUIRED += periph_gpio_irq
FEATURES_REQUIRED += periph_spi
USEMODULE += netdev_eth
USEMODULE += xtimer
USEMODULE += luid
endif
ifneq (,$(filter encx24j600,$(USEMODULE)))
FEATURES_REQUIRED += periph_gpio_irq
FEATURES_REQUIRED += periph_spi
USEMODULE += netdev_eth
USEMODULE += xtimer
endif
ifneq (,$(filter ethos,$(USEMODULE)))
FEATURES_REQUIRED += periph_uart
USEMODULE += iolist
USEMODULE += netdev_eth
USEMODULE += random
USEMODULE += tsrb
endif
ifneq (,$(filter feetech,$(USEMODULE)))
USEMODULE += uart_half_duplex
endif
ifneq (,$(filter fxos8700,$(USEMODULE)))
USEMODULE += xtimer
FEATURES_REQUIRED += periph_i2c
endif
ifneq (,$(filter grove_ledbar,$(USEMODULE)))
USEMODULE += my9221
endif
ifneq (,$(filter hd44780,$(USEMODULE)))
FEATURES_REQUIRED += periph_gpio
USEMODULE += xtimer
endif
ifneq (,$(filter hdc1000,$(USEMODULE)))
USEMODULE += xtimer
FEATURES_REQUIRED += periph_i2c
endif
ifneq (,$(filter hih6130,$(USEMODULE)))
USEMODULE += xtimer
FEATURES_REQUIRED += periph_i2c
endif
ifneq (,$(filter hts221,$(USEMODULE)))
FEATURES_REQUIRED += periph_i2c
endif
ifneq (,$(filter ina220,$(USEMODULE)))
FEATURES_REQUIRED += periph_i2c
endif
ifneq (,$(filter io1_xplained,$(USEMODULE)))
FEATURES_REQUIRED += periph_gpio
FEATURES_REQUIRED += periph_adc
USEMODULE += at30tse75x
USEMODULE += sdcard_spi
endif
ifneq (,$(filter isl29020,$(USEMODULE)))
FEATURES_REQUIRED += periph_i2c
endif
ifneq (,$(filter isl29125,$(USEMODULE)))
FEATURES_REQUIRED += periph_gpio_irq
FEATURES_REQUIRED += periph_i2c
endif
ifneq (,$(filter jc42,$(USEMODULE)))
FEATURES_REQUIRED += periph_i2c
endif
ifneq (,$(filter kw2xrf,$(USEMODULE)))
USEMODULE += luid
USEMODULE += netif
USEMODULE += ieee802154
USEMODULE += netdev_ieee802154
USEMODULE += core_thread_flags
FEATURES_REQUIRED += periph_spi
FEATURES_REQUIRED += periph_gpio
FEATURES_REQUIRED += periph_gpio_irq
endif
ifneq (,$(filter l3g4200d,$(USEMODULE)))
FEATURES_REQUIRED += periph_i2c
endif
ifneq (,$(filter lc709203f,$(USEMODULE)))
FEATURES_REQUIRED += periph_i2c
FEATURES_REQUIRED += periph_gpio_irq
endif
ifneq (,$(filter lis2dh12%,$(USEMODULE)))
ifneq (,$(filter lis2dh12_spi,$(USEMODULE)))
FEATURES_REQUIRED += periph_gpio
FEATURES_REQUIRED += periph_spi
else
FEATURES_REQUIRED += periph_i2c
endif
USEMODULE += lis2dh12
endif
ifneq (,$(filter lis3dh,$(USEMODULE)))
FEATURES_REQUIRED += periph_gpio
FEATURES_REQUIRED += periph_spi
endif
ifneq (,$(filter lis3mdl,$(USEMODULE)))
FEATURES_REQUIRED += periph_i2c
USEMODULE += xtimer
endif
ifneq (,$(filter lpd8808,$(USEMODULE)))
USEMODULE += color
FEATURES_REQUIRED += periph_gpio
endif
ifneq (,$(filter lps331ap lps2%hb,$(USEMODULE)))
USEMODULE += lpsxxx
endif
ifneq (,$(filter lpsxxx,$(USEMODULE)))
FEATURES_REQUIRED += periph_i2c
endif
ifneq (,$(filter lsm303dlhc,$(USEMODULE)))
FEATURES_REQUIRED += periph_i2c
endif
ifneq (,$(filter lsm6dsl,$(USEMODULE)))
FEATURES_REQUIRED += periph_i2c
USEMODULE += xtimer
endif
ifneq (,$(filter ltc4150_bidirectional,$(USEMODULE)))
USEMODULE += ltc4150
endif
ifneq (,$(filter ltc4150,$(USEMODULE)))
FEATURES_REQUIRED += periph_gpio
FEATURES_REQUIRED += periph_gpio_irq
USEMODULE += xtimer
endif
ifneq (,$(filter mag3110,$(USEMODULE)))
FEATURES_REQUIRED += periph_i2c
endif
ifneq (,$(filter mma7660,$(USEMODULE)))
FEATURES_REQUIRED += periph_i2c
endif
ifneq (,$(filter mma8x5x,$(USEMODULE)))
FEATURES_REQUIRED += periph_i2c
endif
ifneq (,$(filter motor_driver,$(USEMODULE)))
FEATURES_REQUIRED += periph_pwm
endif
ifneq (,$(filter mpl3115a2,$(USEMODULE)))
FEATURES_REQUIRED += periph_i2c
endif
ifneq (,$(filter mpu9150,$(USEMODULE)))
FEATURES_REQUIRED += periph_i2c
USEMODULE += xtimer
endif
ifneq (,$(filter mq3,$(USEMODULE)))
FEATURES_REQUIRED += periph_adc
endif
ifneq (,$(filter mrf24j40,$(USEMODULE)))
USEMODULE += xtimer
USEMODULE += luid
USEMODULE += netif
USEMODULE += ieee802154
USEMODULE += netdev_ieee802154
FEATURES_REQUIRED += periph_gpio
FEATURES_REQUIRED += periph_gpio_irq
FEATURES_REQUIRED += periph_spi
endif
ifneq (,$(filter mtd_sdcard,$(USEMODULE)))
USEMODULE += mtd
USEMODULE += sdcard_spi
endif
ifneq (,$(filter mtd_spi_nor,$(USEMODULE)))
USEMODULE += mtd
FEATURES_REQUIRED += periph_spi
endif
ifneq (,$(filter my9221,$(USEMODULE)))
FEATURES_REQUIRED += periph_gpio
USEMODULE += xtimer
endif
ifneq (,$(filter nrfmin,$(USEMODULE)))
FEATURES_REQUIRED += radio_nrfmin
FEATURES_REQUIRED += periph_cpuid
USEMODULE += netif
endif
ifneq (,$(filter nrf24l01p,$(USEMODULE)))
FEATURES_REQUIRED += periph_gpio
FEATURES_REQUIRED += periph_gpio_irq
FEATURES_REQUIRED += periph_spi
USEMODULE += xtimer
endif
ifneq (,$(filter nvram_spi,$(USEMODULE)))
FEATURES_REQUIRED += periph_spi
USEMODULE += nvram
USEMODULE += xtimer
endif
ifneq (,$(filter pcd8544,$(USEMODULE)))
FEATURES_REQUIRED += periph_gpio
FEATURES_REQUIRED += periph_spi
USEMODULE += xtimer
endif
ifneq (,$(filter pir,$(USEMODULE)))
FEATURES_REQUIRED += periph_gpio
FEATURES_REQUIRED += periph_gpio_irq
USEMODULE += xtimer
endif
ifneq (,$(filter pn532,$(USEMODULE)))
FEATURES_REQUIRED += periph_gpio
FEATURES_REQUIRED += periph_gpio_irq
endif
ifneq (,$(filter pulse_counter,$(USEMODULE)))
USEMODULE += xtimer
FEATURES_REQUIRED += periph_gpio_irq
endif
ifneq (,$(filter rgbled,$(USEMODULE)))
USEMODULE += color
endif
ifneq (,$(filter rn2%3,$(USEMODULE)))
FEATURES_REQUIRED += periph_gpio
FEATURES_REQUIRED += periph_uart
USEMODULE += xtimer
USEMODULE += rn2xx3
USEMODULE += fmt
endif
ifneq (,$(filter sdcard_spi,$(USEMODULE)))
FEATURES_REQUIRED += periph_gpio
FEATURES_REQUIRED += periph_spi
USEMODULE += checksum
USEMODULE += xtimer
endif
ifneq (,$(filter sds011,$(USEMODULE)))
FEATURES_REQUIRED += periph_uart
endif
ifneq (,$(filter servo,$(USEMODULE)))
FEATURES_REQUIRED += periph_pwm
endif
ifneq (,$(filter sht1%,$(USEMODULE)))
USEMODULE += sht1x
FEATURES_REQUIRED += periph_gpio
USEMODULE += xtimer
endif
ifneq (,$(filter sht2x,$(USEMODULE)))
USEMODULE += xtimer
FEATURES_REQUIRED += periph_i2c
endif
ifneq (,$(filter sht3x,$(USEMODULE)))
USEMODULE += xtimer
FEATURES_REQUIRED += periph_i2c
endif
ifneq (,$(filter si114%,$(USEMODULE)))
USEMODULE += xtimer
FEATURES_REQUIRED += periph_i2c
USEMODULE += si114x
endif
ifneq (,$(filter si70%,$(USEMODULE)))
USEMODULE += xtimer
FEATURES_REQUIRED += periph_i2c
USEMODULE += si70xx
endif
ifneq (,$(filter slipdev,$(USEMODULE)))
USEMODULE += tsrb
FEATURES_REQUIRED += periph_uart
endif
ifneq (,$(filter soft_spi,$(USEMODULE)))
FEATURES_REQUIRED += periph_gpio
USEMODULE += xtimer
endif
ifneq (,$(filter srf02,$(USEMODULE)))
FEATURES_REQUIRED += periph_i2c
USEMODULE += xtimer
endif
ifneq (,$(filter srf04,$(USEMODULE)))
USEMODULE += xtimer
FEATURES_REQUIRED += periph_gpio
FEATURES_REQUIRED += periph_gpio_irq
endif
ifneq (,$(filter srf08,$(USEMODULE)))
FEATURES_REQUIRED += periph_i2c
USEMODULE += xtimer
endif
ifneq (,$(filter stm32_eth,$(USEMODULE)))
FEATURES_REQUIRED += periph_eth
FEATURES_REQUIRED += periph_dma
USEMODULE += netdev_eth
USEMODULE += iolist
USEMODULE += luid
endif
ifneq (,$(filter sx127%,$(USEMODULE)))
FEATURES_REQUIRED += periph_gpio
FEATURES_REQUIRED += periph_gpio_irq
FEATURES_REQUIRED += periph_spi
FEATURES_OPTIONAL += periph_spi_gpio_mode
USEMODULE += iolist
USEMODULE += xtimer
USEMODULE += sx127x
USEMODULE += netif
USEMODULE += lora
endif
ifneq (,$(filter tcs37727,$(USEMODULE)))
FEATURES_REQUIRED += periph_i2c
endif
ifneq (,$(filter tps6274x,$(USEMODULE)))
FEATURES_REQUIRED += periph_gpio
endif
ifneq (,$(filter tja1042,$(USEMODULE)))
USEMODULE += can_trx
FEATURES_REQUIRED += periph_gpio
endif
ifneq (,$(filter tmp006,$(USEMODULE)))
FEATURES_REQUIRED += periph_i2c
USEMODULE += xtimer
endif
ifneq (,$(filter tsl2561,$(USEMODULE)))
FEATURES_REQUIRED += periph_i2c
USEMODULE += xtimer
endif
ifneq (,$(filter tsl4531x,$(USEMODULE)))
FEATURES_REQUIRED += periph_i2c
USEMODULE += xtimer
endif
ifneq (,$(filter uart_half_duplex,$(USEMODULE)))
FEATURES_REQUIRED += periph_gpio
FEATURES_REQUIRED += periph_uart
USEMODULE += xtimer
endif
ifneq (,$(filter vcnl40%0,$(USEMODULE)))
USEMODULE += vcnl40x0
FEATURES_REQUIRED += periph_i2c
endif
ifneq (,$(filter veml6070,$(USEMODULE)))
FEATURES_REQUIRED += periph_i2c
endif
ifneq (,$(filter w5100,$(USEMODULE)))
FEATURES_REQUIRED += periph_gpio_irq
FEATURES_REQUIRED += periph_spi
USEMODULE += netdev_eth
USEMODULE += luid
endif
ifneq (,$(filter xbee,$(USEMODULE)))
FEATURES_REQUIRED += periph_uart
FEATURES_REQUIRED += periph_gpio
USEMODULE += ieee802154
USEMODULE += xtimer
USEMODULE += netif
endif
View Git Blame Copy Permalink