mirror of
https://github.com/RIOT-OS/RIOT.git
synced 2025-01-18 12:52:44 +01:00
9b23863804
The latest bootloader has new usb device id and needs different parameters to flash a RIOT image using `dfu-util`.
37 lines
1.2 KiB
Makefile
37 lines
1.2 KiB
Makefile
## the cpu to build for
|
|
export CPU = stm32f1
|
|
export CPU_MODEL = stm32f103c8
|
|
|
|
INCLUDES += -I$(RIOTBOARD)/common/stm32f103c8/include
|
|
|
|
# define the default port depending on the host OS
|
|
PORT_LINUX ?= /dev/ttyUSB0
|
|
PORT_DARWIN ?= $(firstword $(sort $(wildcard /dev/tty.SLAB_USBtoUART*)))
|
|
|
|
# setup serial terminal
|
|
include $(RIOTMAKE)/tools/serial.inc.mk
|
|
|
|
# optionally, use dfu-util to flash via usb
|
|
# note: needs a bootloader flashed before, config below is compatible
|
|
# with blackmagic_dfu, see https://github.com/blacksphere/blackmagic/
|
|
# To stop bootloader from loading an existing firmware, pull down
|
|
# (ground) GPIO B1.
|
|
ifeq ($(PROGRAMMER),dfu-util)
|
|
export ROM_OFFSET ?= 0x2000 # Skip the space needed by the embedded bootloader
|
|
export FLASHER = dfu-util
|
|
export DEBUGGER = # no debugger
|
|
export RESET = # dfu-util has no support for resetting the device
|
|
|
|
HEXFILE = $(BINFILE)
|
|
export FFLAGS = -d 1eaf:0003 -a 2 -D "$(HEXFILE)"
|
|
# for older bootloader versions use this:
|
|
#export FFLAGS = -d 1d50:6017 -s 0x08002000:leave -D "$(HEXFILE)"
|
|
else
|
|
|
|
# this board uses openocd by default
|
|
export DEBUG_ADAPTER ?= stlink
|
|
export STLINK_VERSION ?= 2
|
|
|
|
include $(RIOTMAKE)/tools/openocd.inc.mk
|
|
endif
|