RIOT-OS/RIOT
RIOT-OS/RIOT
1
0
Fork 0
mirror of https://github.com/RIOT-OS/RIOT.git synced 2024-12-29 04:50:03 +01:00
Code Releases Activity
10ab3c2134
RIOT/tests/driver_xbee
History
Marian Buschsieweke 4cfcc4ee9e
tests/driver_xbee: Update Makefile.ci 
The additional warning message increases the size of the .rodata
section. For the Arduino Mega2560 this is placed in RAM (and flash), as
flash is not mapped into the data address space.
2021-03-22 08:15:55 +01:00
..
main.c tests/driver_xbee: use common netdev test 2020-03-28 18:02:09 +01:00
Makefile tests: use driver_netdev_common Makefile.netdev.mk instead of Makefile 2020-08-27 11:46:25 +02:00
Makefile.ci tests/driver_xbee: Update Makefile.ci 2021-03-22 08:15:55 +01:00
README.md boards/cpu/drivers/sys: use generic stdio_ if 2018-08-22 10:54:25 +02:00

README.md

About

This is a manual test application for testing the Xbee S1 network device driver.

For running this test, you need to connect the following pins of a Xbee S1 module to your board:

  • UART RX
  • UART TX
  • VCC (3V3)
  • GND

NOTE: when you use an Arduino Xbee shield, the Xbee module is connected to the same UART as RIOTs standard out. In this case you must redefine STDIO_UART_DEV to another UART interface in the board.h and connect a UART-to-USB adapter to that UART.

Usage

For testing the Xbee driver you can use the netif shell commands that are included in this application.