/**
@defgroup    boards_nucleo-f091rc STM32 Nucleo-F091RC
@ingroup     boards_common_nucleo64
@brief       Support for the STM32 Nucleo-F091RC

## Overview

The Nucleo-F091 is a board from ST's Nucleo family supporting a ARM Cortex-M0
STM32F091 microcontroller with 32Kb of RAM and 256Kb of ROM.

## Hardware

![STM32F3discovery image](http://media.digikey.com/Photos/STMicro%20Photos/MFG_NUCLEO.jpg)
![nucleo-f091 pinout](https://raw.githubusercontent.com/wiki/RIOT-OS/RIOT/images/nucleo-f091_pinout.png)


### MCU
| MCU        | STM32F091RC       |
|:------------- |:--------------------- |
| Family | ARM Cortex-M0     |
| Vendor | ST Microelectronics   |
| RAM        | 32Kb |
| Flash      | 256Kb             |
| Frequency  | up to 48MHz (using the on-board 8MHz Oszillator of the ST-Link) |
| FPU        | no                |
| Timers | 9 (8x 16-bit, 1x 32-bit [TIM2])   |
| ADCs       | 1x 12-bit         |
| UARTs      | 8                 |
| SPIs       | 2                 |
| I2Cs       | 2                 |
| Vcc        | 2.0V - 3.6V           |
| Datasheet  | [Datasheet](http://www.st.com/web/en/resource/technical/document/datasheet/DM00115237.pdf) |
| Reference Manual | [Reference Manual](http://www.st.com/web/en/resource/technical/document/reference_manual/DM00031936.pdf) |
| Programming Manual | [Programming Manual](http://www.st.com/web/en/resource/technical/document/programming_manual/DM00051352.pdf) |
| Board Manual   | [Board Manual](http://www.st.com/st-web-ui/static/active/en/resource/technical/document/user_manual/DM00105823.pdf)|

### RIOT static pin mapping
please refer to [this](https://docs.google.com/spreadsheets/d/1gnxsux5WpFrn-33Ivb9nGgTBqooqgDYxRkhZms-cvsc/edit?usp=sharing)
document for the pin mapping as implemenented in `boards/nucleo-f091/include/periph_conf.h`

### User Interface
1 Button:

| NAME   | USER  |
|:----- |:----- |
| Pin    | PC13  |

1 LEDs:

| NAME   | LED_GREEN |
| -----  | ------------- |
| Color  | orange    |
| Pin    | PA5           |


## Implementation Status
| Device | ID        | Supported | Comments  |
|:------------- |:------------- |:------------- |:------------- |
| MCU        | STM32F091RC   | partly    | Energy saving modes not fully utilized |
| Low-level driver | GPIO    | no        | |
|        | PWM       | no        | |
|        | UART      | full      | |
|        | I2C       | no        | |
|        | SPI       | no        | |
|        | USB       | no        | |
|        | Timer     | full      | |


## Flashing the device
The ST Nucleo-F091 board includes an on-board ST-LINK V2 programmer. The
easiest way to program the board is to use OpenOCD. Once you have installed
OpenOCD (look [here](https://github.com/RIOT-OS/RIOT/wiki/OpenOCD) for
installation instructions), you can flash the board simply by typing

```
make BOARD=nucleo-f091 flash
```
and debug via GDB by simply typing
```
make BOARD=nucleo-f091 debug
```


## Supported Toolchains
For using the ST Nucleo-F091 board we strongly recommend the usage of the
[GNU Tools for ARM Embedded Processors](https://launchpad.net/gcc-arm-embedded)
toolchain.
 */