/* * Copyright (C) 2015 Freie Universität Berlin * * This file is subject to the terms and conditions of the GNU Lesser * General Public License v2.1. See the file LICENSE in the top level * directory for more details. */ /** * @ingroup boards_samr21-xpro * @{ * * @file * @brief Configuration of CPU peripherals for the Atmel SAM R21 Xplained * Pro board * * @author Thomas Eichinger * @author Hauke Petersen s */ #ifndef __PERIPH_CONF_H #define __PERIPH_CONF_H #ifdef __cplusplus extern "C" { #endif /** * @brief External oscillator and clock configuration * * For selection of the used CORECLOCK, we have implemented two choices: * * - usage of the PLL fed by the internal 8MHz oscillator divided by 8 * - usage of the internal 8MHz oscillator directly, divided by N if needed * * * The PLL option allows for the usage of a wider frequency range and a more * stable clock with less jitter. This is why we use this option as default. * * The target frequency is computed from the PLL multiplier and the PLL divisor. * Use the following formula to compute your values: * * CORECLOCK = ((PLL_MUL + 1) * 1MHz) / PLL_DIV * * NOTE: The PLL circuit does not run with less than 32MHz while the maximum PLL * frequency is 96MHz. So PLL_MULL must be between 31 and 95! * * * The internal Oscillator used directly can lead to a slightly better power * efficiency to the cost of a less stable clock. Use this option when you know * what you are doing! The actual core frequency is adjusted as follows: * * CORECLOCK = 8MHz / DIV * * NOTE: A core clock frequency below 1MHz is not recommended * * @{ */ #define CLOCK_USE_PLL (1) #if CLOCK_USE_PLL /* edit these values to adjust the PLL output frequency */ #define CLOCK_PLL_MUL (47U) /* must be >= 31 & <= 95 */ #define CLOCK_PLL_DIV (1U) /* adjust to your needs */ /* generate the actual used core clock frequency */ #define CLOCK_CORECLOCK (((CLOCK_PLL_MUL + 1) * 1000000U) / CLOCK_PLL_DIV) #else /* edit this value to your needs */ #define CLOCK_DIV (1U) /* generate the actual core clock frequency */ #define CLOCK_CORECLOCK (8000000 / CLOCK_DIV) #endif /** @} */ /** * @name Timer peripheral configuration * @{ */ #define TIMER_NUMOF (2U) #define TIMER_0_EN 1 #define TIMER_1_EN 1 /* Timer 0 configuration */ #define TIMER_0_DEV TC3->COUNT16 #define TIMER_0_CHANNELS 2 #define TIMER_0_MAX_VALUE (0xffff) #define TIMER_0_ISR isr_tc3 /* Timer 1 configuration */ #define TIMER_1_DEV TC4->COUNT32 #define TIMER_1_CHANNELS 2 #define TIMER_1_MAX_VALUE (0xffffffff) #define TIMER_1_ISR isr_tc4 /** @} */ /** * @name UART configuration * @{ */ #define UART_NUMOF (1U) #define UART_0_EN 1 #define UART_IRQ_PRIO 1 /* UART 0 device configuration */ #define UART_0_DEV SERCOM0->USART #define UART_0_IRQ SERCOM0_IRQn #define UART_0_ISR isr_sercom0 /* UART 0 pin configuration */ #define UART_0_PORT (PORT->Group[0]) #define UART_0_TX_PIN (4) #define UART_0_RX_PIN (5) #define UART_0_PINS (PORT_PA04 | PORT_PA05) /** @} */ /** * @name SPI configuration * @{ */ #define SPI_NUMOF (2) #define SPI_0_EN 1 #define SPI_1_EN 1 /* SPI0 */ #define SPI_0_DEV SERCOM4->SPI #define SPI_IRQ_0 SERCOM4_IRQn #define SPI_0_DOPO (1) #define SPI_0_DIPO (0) #define SPI_0_SCLK_DEV PORT->Group[2] #define SPI_0_SCLK_PIN (18) #define SPI_0_MISO_DEV PORT->Group[2] #define SPI_0_MISO_PIN (19) #define SPI_0_MOSI_DEV PORT->Group[1] #define SPI_0_MOSI_PIN (30) /* SPI1 */ #define SPI_1_DEV SERCOM5->SPI #define SPI_IRQ_1 SERCOM5_IRQn #define SPI_1_DOPO (1) #define SPI_1_DIPO (2) #define SPI_1_SCLK_DEV PORT->Group[1] #define SPI_1_SCLK_PIN (23) #define SPI_1_MISO_DEV PORT->Group[1] #define SPI_1_MISO_PIN (02) #define SPI_1_MOSI_DEV PORT->Group[1] #define SPI_1_MOSI_PIN (22) /** @} */ /** * @name I2C configuration * @{ */ #define I2C_NUMOF (1U) #define I2C_0_EN 1 #define I2C_1_EN 0 #define I2C_2_EN 0 #define I2C_3_EN 0 #define I2C_IRQ_PRIO 1 #define I2C_0_DEV SERCOM3->I2CM #define I2C_0_IRQ SERCOM3_IRQn #define I2C_0_ISR isr_sercom3 /* I2C 0 pin configuration */ #define I2C_0_PORT (PORT->Group[0]) #define I2C_SDA PIN_PA16 #define I2C_SCL PIN_PA17 #define I2C_0_PINS (PORT_PA16 | PORT_PA17) /** * @name Random Number Generator configuration * @{ */ #define RANDOM_NUMOF (0U) /** @} */ /** * @name RTC configuration * @{ */ #define RTC_NUMOF (1U) #define RTC_DEV RTC->MODE2 /** @} */ /** * @name RTT configuration * @{ */ #define RTT_NUMOF (1U) #define RTT_DEV RTC->MODE0 #define RTT_IRQ RTC_IRQn #define RTT_IRQ_PRIO 10 #define RTT_ISR isr_rtc #define RTT_MAX_VALUE (0xffffffff) #define RTT_FREQUENCY (32768U) /* in Hz. For changes see `rtt.c` */ #define RTT_RUNSTDBY (1) /* Keep RTT running in sleep states */ /** @} */ /** * @name GPIO configuration * @{ */ #define GPIO_NUMOF (9U) #define GPIO_0_EN 1 #define GPIO_1_EN 1 #define GPIO_2_EN 1 #define GPIO_3_EN 1 /*4-7 -> internal */ #define GPIO_4_EN 1 #define GPIO_5_EN 1 #define GPIO_6_EN 1 #define GPIO_7_EN 1 #define GPIO_8_EN 1 #define GPIO_9_EN 0 #define GPIO_10_EN 0 #define GPIO_11_EN 0 #define GPIO_12_EN 0 #define GPIO_13_EN 0 #define GPIO_14_EN 0 #define GPIO_15_EN 0 #define GPIO_NO_EXTINT (18) /* GPIO channel 0 config */ #define GPIO_0_DEV PORT->Group[0] #define GPIO_0_PIN (13) #define GPIO_0_EXTINT (13) /* GPIO channel 1 config */ #define GPIO_1_DEV PORT->Group[0] #define GPIO_1_PIN (28) #define GPIO_1_EXTINT (8) /* GPIO channel 2 config */ #define GPIO_2_DEV PORT->Group[0] #define GPIO_2_PIN (15) #define GPIO_2_EXTINT (15) /* GPIO channel 3 config */ #define GPIO_3_DEV PORT->Group[0] #define GPIO_3_PIN (19) #define GPIO_3_EXTINT (3) /* GPIO 4-7 Internal radio pins*/ /* GPIO channel 4 config radio CS*/ #define GPIO_4_DEV PORT->Group[1] #define GPIO_4_PIN (31) #define GPIO_4_EXTINT GPIO_NO_EXTINT /* GPIO channel 5 config radio IRQ0*/ #define GPIO_5_DEV PORT->Group[1] #define GPIO_5_PIN (0) #define GPIO_5_EXTINT (0) /* GPIO channel 6 config radio reset*/ #define GPIO_6_DEV PORT->Group[1] #define GPIO_6_PIN (15) #define GPIO_6_EXTINT GPIO_NO_EXTINT /* GPIO channel 7 config radio sleep*/ #define GPIO_7_DEV PORT->Group[0] #define GPIO_7_PIN (20) #define GPIO_7_EXTINT GPIO_NO_EXTINT /* GPIO channel 8 config */ #define GPIO_8_DEV PORT->Group[0] #define GPIO_8_PIN (27) #define GPIO_8_EXTINT GPIO_NO_EXTINT /* GPIO channel 9 config */ #define GPIO_9_DEV #define GPIO_9_PIN #define GPIO_9_EXTINT /* GPIO channel 10 config */ #define GPIO_10_DEV #define GPIO_10_PIN #define GPIO_10_EXTINT /* GPIO channel 11 config */ #define GPIO_11_DEV #define GPIO_11_PIN #define GPIO_11_EXTINT /* GPIO channel 12 config */ #define GPIO_12_PIN #define GPIO_12_EXTINT /* GPIO channel 13 config */ #define GPIO_13_PIN #define GPIO_13_EXTINT /* GPIO channel 14 config */ #define GPIO_14_PIN #define GPIO_14_EXTINT /* GPIO channel 15 config */ #define GPIO_15_PIN #define GPIO_15_EXTINT /** @} */ #ifdef __cplusplus } #endif #endif /* __PERIPH_CONF_H */ /** @} */