*** stock_iot-lab_M3/openwsn/board_ow.c	Thu Apr 24 11:19:39 2014
--- riot-openwsn-wip/openwsn/board_ow.c	Thu Apr 24 16:55:54 2014
***************
*** 0 ****
--- 1,115 ----
+ /**
+ \brief iot-lab_M3 definition of the "board" bsp module.
+
+ \author Alaeddine Weslati <alaeddine.weslati@inria.fr>, January 2014.
+ */
+ #include "stm32f10x_lib.h"
+ #include "board_ow.h"
+ // bsp modules
+ #include "leds_ow.h"
+ #include "uart_ow.h"
+ #include "spi.h"
+ // #include "bsp_timer.h"
+ #include "radio.h"
+ #include "radiotimer.h"
+ #include "rcc.h"
+ #include "nvic.h"
+ #include "debugpins.h"
+ #include "board_info.h"
+ #include "opentimers.h"
+ #include "gpio.h"
+
+ //=========================== main ============================================
+
+ // extern int mote_main();
+ //
+ // int main()
+ // {
+ //  return mote_main();
+ // }
+
+ //=========================== public ==========================================
+
+ void board_init_ow()
+ {
+
+   RCC_Configuration();//Configure rcc
+   NVIC_Configuration();//configure NVIC and Vector Table
+
+   //configure ALL GPIO to AIN to get lowest power
+   // GPIO_Config_ALL_AIN();
+   //configuration GPIO to measure the time from sleep to 72MHz
+   // GPIO_Configuration();
+
+   GPIO_InitTypeDef  GPIO_InitStructure;
+
+   //enable GPIOC and GPIOA, Clock
+   RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOC , ENABLE);
+   RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOA , ENABLE);
+
+   //Configure PA.02 as SLP_TR pin of RF
+   GPIO_InitStructure.GPIO_Pin   = GPIO_Pin_2;
+   GPIO_InitStructure.GPIO_Mode  = GPIO_Mode_Out_PP;
+   GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
+   GPIO_Init(GPIOA, &GPIO_InitStructure);
+
+   //Configure PC.01 as RST pin of RF
+   GPIO_InitStructure.GPIO_Pin   = GPIO_Pin_1;
+   GPIO_InitStructure.GPIO_Mode  = GPIO_Mode_Out_PP;
+   GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
+   GPIO_Init(GPIOC, &GPIO_InitStructure);
+
+   //set /RST pin high(never reset)
+   GPIO_SetBits(GPIOC, GPIO_Pin_1);
+
+   // Configure PC.04 as input floating (EXTI Line4)
+   GPIO_InitStructure.GPIO_Pin   = GPIO_Pin_4;
+   GPIO_InitStructure.GPIO_Mode  = GPIO_Mode_IN_FLOATING;
+   GPIO_Init(GPIOC, &GPIO_InitStructure);
+
+   GPIO_EXTILineConfig(GPIO_PortSourceGPIOC, GPIO_PinSource4);//Connect EXTI Line4 to PC.4
+   EXTI_ClearITPendingBit(EXTI_Line4);
+
+   //Configures EXTI line 4 to generate an interrupt on rising edge
+   EXTI_InitTypeDef  EXTI_InitStructure;
+   EXTI_InitStructure.EXTI_Line    = EXTI_Line4;
+   EXTI_InitStructure.EXTI_Mode    = EXTI_Mode_Interrupt;
+   EXTI_InitStructure.EXTI_Trigger = EXTI_Trigger_Rising;
+   EXTI_InitStructure.EXTI_LineCmd = ENABLE;
+   EXTI_Init(&EXTI_InitStructure);
+
+   // initialize board
+   // leds_init_ow();
+ //   uart_init_ow();
+   spi_init();
+   // bsp_timer_init();
+
+   radio_init();
+   radiotimer_init();
+   debugpins_init();
+   //enable nvic for the radio
+   NVIC_radio();
+ }
+
+ void board_sleep(void)
+ {
+ #if 0
+   uint16_t sleepTime = radiotimer_getPeriod() - radiotimer_getCapturedTime();
+   DBGMCU_Config(DBGMCU_STOP, ENABLE);
+
+   // Enable PWR and BKP clock
+   RCC_APB1PeriphClockCmd(RCC_APB1Periph_PWR | RCC_APB1Periph_BKP, ENABLE);
+   // Desable the SRAM and FLITF clock in Stop mode
+   RCC_AHBPeriphClockCmd(RCC_AHBPeriph_SRAM | RCC_AHBPeriph_FLITF, DISABLE);
+
+   PWR_EnterSTOPMode(PWR_Regulator_ON,PWR_STOPEntry_WFI);
+
+   if(sleepTime > 0)
+   opentimers_sleepTimeCompesation(sleepTime*2);
+ #endif
+ }
+
+ void board_reset(void)
+ {
+ }
+