*** stock_iot-lab_M3/openwsn/board_info.h	Thu Apr 24 11:19:39 2014
--- riot-openwsn-wip/openwsn/board_info.h	Thu Apr 24 16:55:54 2014
***************
*** 0 ****
--- 1,81 ----
+ /**
+ \brief iot-lab_M3 board information bsp module (based on openmoteSTM32 code).
+
+ This module simply defines some strings describing the board, which CoAP uses
+ to return the board's description.
+
+ \author Thomas Watteyne <watteyne@eecs.berkeley.edu>, February 2012.
+ \author Tengfei Chang <tengfei.chang@gmail.com>,  July 2012.
+ \author Alaeddine Weslati <alaeddine.weslati@inria.fr>,  January 2014.
+ */
+
+ #ifndef __BOARD_INFO_H
+ #define __BOARD_INFO_H
+
+ #include "stm32f10x_lib.h"
+ #include "stdint.h"
+ #include "string.h"
+
+ //=========================== defines =========================================
+ #define port_INLINE                         inline
+
+ #define PRAGMA(x)  _Pragma(#x)
+ #define PACK(x)     pack(x)
+
+ //TODO in case previous declaration fails in certain compilers. Remove this
+ //one if it works with GNU GCC
+ //#define PACK_START  _Pragma("pack(1)")
+ //#define PACK_END    _Pragma("pack()")
+
+ #define INTERRUPT_DECLARATION(); //no declaration
+ #define DISABLE_INTERRUPTS()    __disable_irq();
+ #define ENABLE_INTERRUPTS()     __enable_irq();
+
+ //===== timer
+
+ #define PORT_TIMER_WIDTH                    uint16_t
+ #define PORT_RADIOTIMER_WIDTH               uint16_t
+
+ #define PORT_SIGNED_INT_WIDTH               int16_t
+ #define PORT_TICS_PER_MS                    32
+ #define SCHEDULER_WAKEUP()                  EXTI->SWIER |= EXTI_Line1;
+ #define SCHEDULER_ENABLE_INTERRUPT()        //enable in board use EXTI_Line1
+
+ //===== pinout
+
+ // [PA.2] radio SLP_TR_CNTL
+ #define PORT_PIN_RADIO_SLP_TR_CNTL_HIGH()     GPIOA->ODR |= (1<<2);
+ #define PORT_PIN_RADIO_SLP_TR_CNTL_LOW()      GPIOA->ODR &= ~(1<<2);
+ // radio reset line
+ // radio /RST
+ #define PORT_PIN_RADIO_RESET_HIGH()       //GPIOC->ODR |= 0X0040;// nothing
+ #define PORT_PIN_RADIO_RESET_LOW()        //GPIOC->ODR &= ~0X0040;// nothing
+ //#define PORT_PIN_RADIO_RESET_LOW()            GPIOC->ODR &= ~(1<<1);
+
+ //===== IEEE802154E timing
+ // time-slot related
+ #define PORT_TsSlotDuration                 491   // counter counts one extra count, see datasheet
+ // execution speed related
+ #define PORT_maxTxDataPrepare               66    // 2014us (measured 746us)
+ #define PORT_maxRxAckPrepare                20    //  305us (measured  83us)
+ #define PORT_maxRxDataPrepare               33    // 1007us (measured  84us)
+ #define PORT_maxTxAckPrepare                30    //  305us (measured 219us)
+ // radio speed related
+ #define PORT_delayTx                        10     //  214us (measured 219us)
+ #define PORT_delayRx                        0     //    0us (can not measure)
+ // radio watchdog
+
+ //=========================== variables =======================================
+
+ static const uint8_t rreg_uriquery[]        = "h=ucb";
+ static const uint8_t infoBoardname[]        = "IOT-LAB_M3";
+ static const uint8_t infouCName[]           = "STM32F103";
+ static const uint8_t infoRadioName[]        = "AT86RF231";
+
+ //=========================== prototypes ======================================
+
+ //=========================== public ==========================================
+
+ //=========================== private =========================================
+
+ #endif