/*
 * Copyright (C)  2016 Freie Universität Berlin
 *                2016-2017 Inria
 *
 * This file is subject to the terms and conditions of the GNU Lesser
 * General Public License v2.1. See the file LICENSE in the top level
 * directory for more details.
 */

/**
 * @ingroup     boards_common_arduino-mkr
 * @{
 *
 * @file
 * @brief       Common configuration for clock, timer, pwm, adc, rtc and rtt
 *              peripherals for Arduino MKR boards
 *
 * @author      Thomas Eichinger <thomas.eichinger@fu-berlin.de>
 * @author      Hauke Petersen <hauke.petersen@fu-berlin.de>
 * @author      Peter Kietzmann <peter.kietzmann@haw-hamburg.de>
 * @author      Alexandre Abadie <alexandre.abadie@inria.fr>
 * @author      Bumsik kim <kbumsik@gmail.com>
 */

#ifndef PERIPH_CONF_COMMON_H
#define PERIPH_CONF_COMMON_H

#include "periph_cpu.h"

#ifdef __cplusplus
extern "C" {
#endif


/**
 * @name    External oscillator and clock configuration
 *
 * For selection of the used CORECLOCK, we have implemented two choices:
 *
 * - usage of the PLL fed by the internal 8MHz oscillator divided by 8
 * - usage of the internal 8MHz oscillator directly, divided by N if needed
 *
 *
 * The PLL option allows for the usage of a wider frequency range and a more
 * stable clock with less jitter. This is why we use this option as default.
 *
 * The target frequency is computed from the PLL multiplier and the PLL divisor.
 * Use the following formula to compute your values:
 *
 * CORECLOCK = ((PLL_MUL + 1) * 1MHz) / PLL_DIV
 *
 * NOTE: The PLL circuit does not run with less than 32MHz while the maximum PLL
 *       frequency is 96MHz. So PLL_MULL must be between 31 and 95!
 *
 *
 * The internal Oscillator used directly can lead to a slightly better power
 * efficiency to the cost of a less stable clock. Use this option when you know
 * what you are doing! The actual core frequency is adjusted as follows:
 *
 * CORECLOCK = 8MHz / DIV
 *
 * NOTE: A core clock frequency below 1MHz is not recommended
 *
 * @{
 */
#define CLOCK_USE_PLL       (1)

#if CLOCK_USE_PLL
/* edit these values to adjust the PLL output frequency */
#define CLOCK_PLL_MUL       (47U)               /* must be >= 31 & <= 95 */
#define CLOCK_PLL_DIV       (1U)                /* adjust to your needs */
/* generate the actual used core clock frequency */
#define CLOCK_CORECLOCK     (((CLOCK_PLL_MUL + 1) * 1000000U) / CLOCK_PLL_DIV)
#else
/* edit this value to your needs */
#define CLOCK_DIV           (1U)
/* generate the actual core clock frequency */
#define CLOCK_CORECLOCK     (8000000 / CLOCK_DIV)
#endif
/** @} */

/**
 * @name Timer peripheral configuration
 * @{
 */
static const tc32_conf_t timer_config[] = {
    {   /* Timer 0 - System Clock */
        .dev            = TC3,
        .irq            = TC3_IRQn,
        .pm_mask        = PM_APBCMASK_TC3,
        .gclk_ctrl      = GCLK_CLKCTRL_ID_TCC2_TC3,
#if CLOCK_USE_PLL || CLOCK_USE_XOSC32_DFLL
        .gclk_src       = SAM0_GCLK_1MHZ,
        .prescaler      = TC_CTRLA_PRESCALER_DIV1,
#else
        .gclk_src       = SAM0_GCLK_MAIN,
        .prescaler      = TC_CTRLA_PRESCALER_DIV8,
#endif
        .flags          = TC_CTRLA_MODE_COUNT16,
    },
    {   /* Timer 1 */
        .dev            = TC4,
        .irq            = TC4_IRQn,
        .pm_mask        = PM_APBCMASK_TC4 | PM_APBCMASK_TC5,
        .gclk_ctrl      = GCLK_CLKCTRL_ID_TC4_TC5,
#if CLOCK_USE_PLL || CLOCK_USE_XOSC32_DFLL
        .gclk_src       = SAM0_GCLK_1MHZ,
        .prescaler      = TC_CTRLA_PRESCALER_DIV1,
#else
        .gclk_src       = SAM0_GCLK_MAIN,
        .prescaler      = TC_CTRLA_PRESCALER_DIV8,
#endif
        .flags          = TC_CTRLA_MODE_COUNT32,
    }
};

#define TIMER_0_MAX_VALUE   0xffff

/* interrupt function name mapping */
#define TIMER_0_ISR         isr_tc3
#define TIMER_1_ISR         isr_tc4

#define TIMER_NUMOF         ARRAY_SIZE(timer_config)
/** @} */

/**
 * @name PWM configuration
 * @{
 */
#define PWM_0_EN            1

#if PWM_0_EN
/* PWM0 channels */
static const pwm_conf_chan_t pwm_chan0_config[] = {
    /* GPIO pin, MUX value, TCC channel */
    { GPIO_PIN(PA, 10), GPIO_MUX_F, 2 },    /* ~2 */
    { GPIO_PIN(PA, 11), GPIO_MUX_F, 3 },    /* ~3 */
};
#endif

/* PWM device configuration */
static const pwm_conf_t pwm_config[] = {
#if PWM_0_EN
    {TCC0, pwm_chan0_config, ARRAY_SIZE(pwm_chan0_config)},
#endif
};

/* number of devices that are actually defined */
#define PWM_NUMOF           ARRAY_SIZE(pwm_config)
/** @} */

/**
 * @name ADC configuration
 * @{
 */

/* ADC Default values */
#define ADC_PRESCALER                       ADC_CTRLB_PRESCALER_DIV512

#define ADC_NEG_INPUT                       ADC_INPUTCTRL_MUXNEG_GND
#define ADC_GAIN_FACTOR_DEFAULT             ADC_INPUTCTRL_GAIN_1X
#define ADC_REF_DEFAULT                     ADC_REFCTRL_REFSEL_INT1V

static const adc_conf_chan_t adc_channels[] = {
    /* port, pin, muxpos */
    {GPIO_PIN(PA, 2), ADC_INPUTCTRL_MUXPOS_PIN0},     /* A0 */
    {GPIO_PIN(PB, 2), ADC_INPUTCTRL_MUXPOS_PIN10},    /* A1 */
    {GPIO_PIN(PB, 3), ADC_INPUTCTRL_MUXPOS_PIN11},    /* A2 */
    {GPIO_PIN(PA, 4), ADC_INPUTCTRL_MUXPOS_PIN4},     /* A3 */
    {GPIO_PIN(PA, 5), ADC_INPUTCTRL_MUXPOS_PIN5},     /* A4 */
    {GPIO_PIN(PA, 6), ADC_INPUTCTRL_MUXPOS_PIN6},     /* A5 */
    {GPIO_PIN(PA, 7), ADC_INPUTCTRL_MUXPOS_PIN7},     /* A6 */
};

#define ADC_NUMOF                           ARRAY_SIZE(adc_channels)
/** @} */

/**
 * @name I2C configuration
 * @{
 */
static const i2c_conf_t i2c_config[] = {
    {
        .dev      = &(SERCOM0->I2CM),
        .speed    = I2C_SPEED_NORMAL,
        .scl_pin  = GPIO_PIN(PA, 9),
        .sda_pin  = GPIO_PIN(PA, 8),
        .mux      = GPIO_MUX_C,
        .gclk_src = SAM0_GCLK_MAIN,
        .flags    = I2C_FLAG_NONE
     }
};
#define I2C_NUMOF           ARRAY_SIZE(i2c_config)
/** @} */

/**
 * @name RTC configuration
 * @{
 */
#define RTC_DEV             RTC->MODE2
/** @} */

/**
 * @name RTT configuration
 * @{
 */
#define RTT_DEV             RTC->MODE0
#define RTT_IRQ             RTC_IRQn
#define RTT_IRQ_PRIO        10
#define RTT_ISR             isr_rtc
#define RTT_MAX_VALUE       (0xffffffff)
#define RTT_FREQUENCY       (32768U)    /* in Hz. For changes see `rtt.c` */
#define RTT_RUNSTDBY        (1)         /* Keep RTT running in sleep states */
/** @} */

/**
 * @name USB peripheral configuration
 * @{
 */
static const sam0_common_usb_config_t sam_usbdev_config[] = {
    {
        .dm     = GPIO_PIN(PA, 24),
        .dp     = GPIO_PIN(PA, 25),
        .d_mux  = GPIO_MUX_G,
        .device = &USB->DEVICE,
        .gclk_src = SAM0_GCLK_MAIN,
    }
};
/** @} */

#ifdef __cplusplus
}
#endif

#endif /* PERIPH_CONF_COMMON_H */
/** @} */