# name of your application
APPLICATION = nanocoap_server

# If no BOARD is found in the environment, use this default:
BOARD ?= native

# This has to be the absolute path to the RIOT base directory:
RIOTBASE ?= $(CURDIR)/../..

BOARD_INSUFFICIENT_MEMORY := arduino-duemilanove arduino-leonardo \
                             arduino-mega2560 arduino-nano arduino-uno \
                             chronos i-nucleo-lrwan1 msb-430 msb-430h \
                             nucleo-f031k6 nucleo-f042k6 nucleo-l031k6 \
                             nucleo-f030r8 nucleo-f303k8 nucleo-l053r8 \
                             stm32f0discovery stm32l0538-disco telosb \
                             waspmote-pro wsn430-v1_3b \
                             wsn430-v1_4 z1

# Include packages that pull up and auto-init the link layer.
# NOTE: 6LoWPAN will be included if IEEE802.15.4 devices are present
USEMODULE += gnrc_netdev_default
USEMODULE += auto_init_gnrc_netif
# Specify the mandatory networking modules for IPv6 and UDP
USEMODULE += gnrc_ipv6_default
USEMODULE += gnrc_udp
USEMODULE += gnrc_sock_udp
# Additional networking modules that can be dropped if not needed
USEMODULE += gnrc_icmpv6_echo

USEMODULE += nanocoap_sock

# include this for nicely formatting the returned internal value
USEMODULE += fmt

# include sha256 (used by example blockwise handler)
USEMODULE += hashes

# include this for printing IP addresses
USEMODULE += shell_commands

# Comment this out to enable code in RIOT that does safety checking
# which is not needed in a production environment but helps in the
# development process:
#DEVELHELP = 1

# Use different settings when compiling for one of the following (low-memory)
# boards
LOW_MEMORY_BOARDS := nucleo-f334r8

ifneq (,$(filter $(BOARD),$(LOW_MEMORY_BOARDS)))
  $(info Using low-memory configuration for microcoap_server.)
  ## low-memory tuning values
  # lower pktbuf buffer size
  CFLAGS += -DGNRC_PKTBUF_SIZE=1000
  USEMODULE += prng_minstd
endif

# Change this to 0 show compiler invocation lines by default:
QUIET ?= 1

include $(RIOTBASE)/Makefile.include

# Set a custom channel if needed
ifneq (,$(filter cc110x,$(USEMODULE)))          # radio is cc110x sub-GHz
  DEFAULT_CHANNEL ?= 0
  CFLAGS += -DCC110X_DEFAULT_CHANNEL=$(DEFAULT_CHANNEL)
else
  ifneq (,$(filter at86rf212b,$(USEMODULE)))    # radio is IEEE 802.15.4 sub-GHz
    DEFAULT_CHANNEL ?= 5
    CFLAGS += -DIEEE802154_DEFAULT_SUBGHZ_CHANNEL=$(DEFAULT_CHANNEL)
  else                                          # radio is IEEE 802.15.4 2.4 GHz
    DEFAULT_CHANNEL ?= 26
    CFLAGS += -DIEEE802154_DEFAULT_CHANNEL=$(DEFAULT_CHANNEL)
  endif
endif