/* * Copyright (C) 2021 luisan00 * * This file is subject to the terms and conditions of the GNU Lesser General * Public License v2.1. See the file LICENSE in the top level directory for more * details. */ /** * @ingroup boards_stm32f469i-disco * @{ * @file * @brief Peripheral MCU configuration for the STM32F469I-DISCO * @author Luis A. Ruiz */ #ifndef PERIPH_CONF_H #define PERIPH_CONF_H /* This board provides a LSE, marked as X3 on the board */ #ifndef CONFIG_BOARD_HAS_LSE #define CONFIG_BOARD_HAS_LSE 1 #endif /* This board provides a HSE, marked as X2 on the board */ #ifndef CONFIG_BOARD_HAS_HSE #define CONFIG_BOARD_HAS_HSE 1 #endif /* The HSE provides a 8MHz clock */ #define CLOCK_HSE MHZ(8) #include "periph_cpu.h" #include "clk_conf.h" #include "cfg_rtt_default.h" #include "cfg_timer_tim2.h" #include "cfg_usb_otg_fs.h" #ifdef __cplusplus extern "C" { #endif /** * @name DMA streams configuration * @{ */ static const dma_conf_t dma_config[] = { {.stream = 14}, /* DMA2 Stream 6 - SPI TX */ {.stream = 13}, /* DMA2 Stream 5 - SPI RX */ }; #define DMA_0_ISR isr_dma2_stream6 #define DMA_1_ISR isr_dma2_stream5 #define DMA_NUMOF ARRAY_SIZE(dma_config) /** @} */ /** * @name UART configuration * UART_DEV(0): Is used as Virtual Com Port for the STLINK, not available pyshically * UART_DEV(1): Available on CN12 and Arduino(R) expansion connector CN7 * @{ */ static const uart_conf_t uart_config[] = { { .dev = USART3, .rcc_mask = RCC_APB1ENR_USART3EN, .rx_pin = GPIO_PIN(PORT_B, 11), .tx_pin = GPIO_PIN(PORT_B, 10), .rx_af = GPIO_AF7, .tx_af = GPIO_AF7, .bus = APB1, .irqn = USART3_IRQn, #ifdef MODULE_PERIPH_DMA .dma = DMA_STREAM_UNDEF, .dma_chan = UINT8_MAX #endif }, { .dev = USART6, .rcc_mask = RCC_APB2ENR_USART6EN, .rx_pin = GPIO_PIN(PORT_C, 7), .tx_pin = GPIO_PIN(PORT_C, 6), .rx_af = GPIO_AF8, .tx_af = GPIO_AF8, .bus = APB2, .irqn = USART6_IRQn, #ifdef MODULE_PERIPH_DMA .dma = DMA_STREAM_UNDEF, .dma_chan = UINT8_MAX #endif }, }; #define UART_0_ISR (isr_usart3) #define UART_1_ISR (isr_usart6) #define UART_NUMOF ARRAY_SIZE(uart_config) /** @} */ /** * @name I2C configuration * * DEV_I2C(0): Available on the connector CN11 * and the Arduino(R) connector CN5 ONLY if we have the next configuration * on the solder bridges; open SB10 and SB12, close SB9 and SB11. * For more information see the user manual. * * DEV_I2C(1): Is not physically available but * it's used for the audio DAC-SAI, with address 0x94 * @{ */ static const i2c_conf_t i2c_config[] = { { .dev = I2C1, .speed = I2C_SPEED_NORMAL, .scl_pin = GPIO_PIN(PORT_B, 8), .sda_pin = GPIO_PIN(PORT_B, 9), .scl_af = GPIO_AF4, .sda_af = GPIO_AF4, .bus = APB1, .rcc_mask = RCC_APB1ENR_I2C1EN, .clk = CLOCK_APB1, .irqn = I2C1_EV_IRQn, }, { .dev = I2C2, .speed = I2C_SPEED_NORMAL, .scl_pin = GPIO_PIN(PORT_H, 4), .sda_pin = GPIO_PIN(PORT_H, 5), .scl_af = GPIO_AF4, .sda_af = GPIO_AF4, .bus = APB1, .rcc_mask = RCC_APB1ENR_I2C2EN, .clk = CLOCK_APB1, .irqn = I2C2_EV_IRQn, }, }; #define I2C_0_ISR isr_i2c1_ev #define I2C_1_ISR isr_i2c2_ev #define I2C_NUMOF ARRAY_SIZE(i2c_config) /** @}*/ /** * @name SPI configuration * @{ */ static const spi_conf_t spi_config[] = { { .dev = SPI2, .mosi_pin = GPIO_PIN(PORT_B, 15), .miso_pin = GPIO_PIN(PORT_B, 14), .sclk_pin = GPIO_PIN(PORT_D, 3), .cs_pin = GPIO_PIN(PORT_H, 6), .mosi_af = GPIO_AF5, .miso_af = GPIO_AF5, .sclk_af = GPIO_AF5, .cs_af = GPIO_AF5, .rccmask = RCC_APB1ENR_I2C2EN, .apbbus = APB1, #ifdef MODULE_PERIPH_DMA .tx_dma = 0, .tx_dma_chan = 6, .rx_dma = 1, .rx_dma_chan = 6, #endif }, }; #define SPI_NUMOF ARRAY_SIZE(spi_config) /** @} */ /** * @name PWM configuration * @{ */ static const pwm_conf_t pwm_config[] = { { .dev = TIM3, .rcc_mask = RCC_APB1ENR_TIM3EN, .chan = { {.pin = GPIO_PIN(PORT_A, 6), .cc_chan = 0}, /* D6 */ {.pin = GPIO_PIN(PORT_B, 5), .cc_chan = 1}, /* CN12-P9 */ {.pin = GPIO_UNDEF, .cc_chan = 0}, /* unused */ {.pin = GPIO_UNDEF, .cc_chan = 0}, /* unused */ }, .af = GPIO_AF2, .bus = APB1, }, { .dev = TIM5, .rcc_mask = RCC_APB1ENR_TIM5EN, .chan = { {.pin = GPIO_PIN(PORT_A, 1), .cc_chan = 1}, /* D5 */ {.pin = GPIO_PIN(PORT_A, 2), .cc_chan = 2}, /* D3 */ {.pin = GPIO_UNDEF, .cc_chan = 0}, /* unused */ {.pin = GPIO_UNDEF, .cc_chan = 0}, /* unused */ }, .af = GPIO_AF2, .bus = APB1, }, { .dev = TIM12, .rcc_mask = RCC_APB1ENR_TIM12EN, .chan = { {.pin = GPIO_PIN(PORT_H, 6), .cc_chan = 0}, /* D10 */ {.pin = GPIO_PIN(PORT_B, 15), .cc_chan = 1}, /* D11 */ {.pin = GPIO_UNDEF, .cc_chan = 0}, /* unused */ {.pin = GPIO_UNDEF, .cc_chan = 0}, /* unused */ }, .af = GPIO_AF9, .bus = APB1, }, { .dev = TIM14, .rcc_mask = RCC_APB1ENR_TIM14EN, .chan = { {.pin = GPIO_PIN(PORT_A, 7), .cc_chan = 0}, /* D9 */ {.pin = GPIO_UNDEF, .cc_chan = 0}, /* unused */ {.pin = GPIO_UNDEF, .cc_chan = 0}, /* unused */ {.pin = GPIO_UNDEF, .cc_chan = 0}, /* unused */ }, .af = GPIO_AF9, .bus = APB1, }, }; #define PWM_NUMOF ARRAY_SIZE(pwm_config) /** @} */ /** * @name ADC configuration * * Not all ADCs are configured, by now, only the 6 ones available * on the Arduino(R) connector A0-A5 and internal VBAT ADC channel. * @{ */ static const adc_conf_t adc_config[] = { {GPIO_PIN(PORT_B, 1), 2, 9}, {GPIO_PIN(PORT_C, 2), 2, 12}, {GPIO_PIN(PORT_C, 3), 2, 13}, {GPIO_PIN(PORT_C, 4), 2, 14}, {GPIO_PIN(PORT_C, 5), 2, 15}, {GPIO_PIN(PORT_A, 4), 2, 4}, {GPIO_UNDEF, 0, 18}, /* VBAT */ }; #define VBAT_ADC ADC_LINE(6) /**< VBAT ADC line */ #define ADC_NUMOF ARRAY_SIZE(adc_config) /** @} */ /** * @brief DAC configuration * @{ */ static const dac_conf_t dac_config[] = { {GPIO_PIN(PORT_A, 4), .chan = 0}, {GPIO_PIN(PORT_A, 5), .chan = 1}, }; /** @}*/ /** * @brief Number of DACs * @{ */ #define DAC_NUMOF ARRAY_SIZE(dac_config) /** @} */ #ifdef __cplusplus } #endif #endif /* PERIPH_CONF_H */ /** @} */