/* * Copyright (C) 2014 Freie Universität Berlin * * This file is subject to the terms and conditions of the GNU Lesser General * Public License v2.1. See the file LICENSE in the top level directory for more * details. */ /** * @ingroup boards_yunjia-nrf51822 * @{ * * @file * @brief Peripheral MCU configuration for the Yunjia NRF51822 board * * @author Hauke Petersen */ #ifndef PERIPH_CONF_H #define PERIPH_CONF_H #include "periph_cpu.h" #include "cfg_clock_16_0.h" #include "cfg_timer_012.h" #include "cfg_rtt_default.h" #ifdef __cplusplus extern "C" { #endif /** * @name UART configuration * @{ */ static const uart_conf_t uart_config[] = { { /* Mapped to USB virtual COM port */ .dev = NRF_UART0, .rx_pin = GPIO_PIN(0, 1), .tx_pin = GPIO_PIN(0, 2), #ifdef MODULE_PERIPH_UART_HW_FC .rts_pin = GPIO_UNDEF, .cts_pin = GPIO_UNDEF, #endif .irqn = UART0_IRQn, }, }; #define UART_NUMOF ARRAY_SIZE(uart_config) #define UART_0_ISR isr_uart0 /** @} */ /** * @name SPI configuration * @{ */ static const spi_conf_t spi_config[] = { { .dev = NRF_SPI0, .sclk = 19, .mosi = 17, .miso = 18 }, { .dev = NRF_SPI1, .sclk = 22, .mosi = 20, .miso = 21 } }; #define SPI_NUMOF ARRAY_SIZE(spi_config) /** @} */ /** * @name I2C (TWI) configuration * @{ */ static const i2c_conf_t i2c_config[] = { { .dev = NRF_TWI0, .pin_scl = 23, .pin_sda = 24, .ppi = 0, .speed = I2C_SPEED_NORMAL } }; #define I2C_NUMOF ARRAY_SIZE(i2c_config) /** @} */ /** * @name ADC configuration * * The configuration consists simply of a list of channels that should be used * @{ */ static const adc_conf_t adc_config[] = {4, 5, 6, 7}; #define ADC_NUMOF ARRAY_SIZE(adc_config) /** @} */ #ifdef __cplusplus } #endif #endif /* PERIPH_CONF_H */ /** @} */