/* * Copyright (C) 2014-2016 Freie Universität Berlin * Copyright (C) 2014 PHYTEC Messtechnik GmbH * * This file is subject to the terms and conditions of the GNU Lesser General * Public License v2.1. See the file LICENSE in the top level directory for more * details. */ /** * @ingroup boards_pba-d-01-kw2x * @{ * * @file * @name Peripheral MCU configuration for the phyWAVE-KW22 Board * * @author Hauke Petersen * @author Johann Fischer * @author Jonas Remmert */ #ifndef PERIPH_CONF_H #define PERIPH_CONF_H #include "periph_cpu.h" #ifdef __cplusplus extern "C" { #endif /** * @name Clock system configuration * @{ */ static const clock_config_t clock_config = { /* * This configuration results in the system running from the PLL output with * the following clock frequencies: * Core: 48 MHz * Bus: 48 MHz * Flash: 24 MHz */ .clkdiv1 = SIM_CLKDIV1_OUTDIV1(0) | SIM_CLKDIV1_OUTDIV2(0) | SIM_CLKDIV1_OUTDIV4(1), .rtc_clc = 0, /* External load caps on the FRDM-K22F board */ .osc32ksel = SIM_SOPT1_OSC32KSEL(2), .clock_flags = /* No OSC0_EN, use modem clock from EXTAL0 */ KINETIS_CLOCK_RTCOSC_EN | KINETIS_CLOCK_USE_FAST_IRC | 0, .default_mode = KINETIS_MCG_MODE_PEE, /* The modem generates a 4 MHz clock signal */ .erc_range = KINETIS_MCG_ERC_RANGE_HIGH, .osc_clc = 0, /* OSC0 is unused*/ .oscsel = MCG_C7_OSCSEL(0), /* Use EXTAL0 for external clock */ .fcrdiv = MCG_SC_FCRDIV(0), /* Fast IRC divide by 1 => 4 MHz */ .fll_frdiv = MCG_C1_FRDIV(0b010), /* Divide by 128 */ .fll_factor_fei = KINETIS_MCG_FLL_FACTOR_1464, /* FLL freq = 48 MHz */ .fll_factor_fee = KINETIS_MCG_FLL_FACTOR_1280, /* FLL freq = 40 MHz */ .pll_prdiv = MCG_C5_PRDIV0(0b00001), /* Divide by 2 */ .pll_vdiv = MCG_C6_VDIV0(0b00000), /* Multiply by 24 => PLL freq = 48 MHz */ }; #define CLOCK_CORECLOCK (48000000ul) #define CLOCK_BUSCLOCK (CLOCK_CORECLOCK / 1) /** @} */ /** * @name Timer configuration * @{ */ #define PIT_NUMOF (2U) #define PIT_CONFIG { \ { \ .prescaler_ch = 0, \ .count_ch = 1, \ }, \ { \ .prescaler_ch = 2, \ .count_ch = 3, \ }, \ } #define LPTMR_NUMOF (0U) #define LPTMR_CONFIG {} #define TIMER_NUMOF ((PIT_NUMOF) + (LPTMR_NUMOF)) #define PIT_BASECLOCK (CLOCK_BUSCLOCK) #define PIT_ISR_0 isr_pit1 #define PIT_ISR_1 isr_pit3 /** @} */ /** * @name UART configuration * @{ */ static const uart_conf_t uart_config[] = { { .dev = UART2, .freq = CLOCK_BUSCLOCK, .pin_rx = GPIO_PIN(PORT_D, 2), .pin_tx = GPIO_PIN(PORT_D, 3), .pcr_rx = PORT_PCR_MUX(3), .pcr_tx = PORT_PCR_MUX(3), .irqn = UART2_RX_TX_IRQn, .scgc_addr = &SIM->SCGC4, .scgc_bit = SIM_SCGC4_UART2_SHIFT, .mode = UART_MODE_8N1, .type = KINETIS_UART, }, { .dev = UART0, .freq = CLOCK_CORECLOCK, .pin_rx = GPIO_PIN(PORT_D, 6), .pin_tx = GPIO_PIN(PORT_D, 7), .pcr_rx = PORT_PCR_MUX(3), .pcr_tx = PORT_PCR_MUX(3), .irqn = UART0_RX_TX_IRQn, .scgc_addr = &SIM->SCGC4, .scgc_bit = SIM_SCGC4_UART0_SHIFT, .mode = UART_MODE_8N1, .type = KINETIS_UART, } }; #define UART_0_ISR (isr_uart2_rx_tx) #define UART_1_ISR (isr_uart0_rx_tx) #define UART_NUMOF ARRAY_SIZE(uart_config) /** @} */ /** * @name ADC configuration * @{ */ static const adc_conf_t adc_config[] = { [ 0] = { .dev = ADC0, .pin = GPIO_PIN(PORT_E, 2), .chan = 1, .avg = ADC_AVG_MAX }, [ 1] = { .dev = ADC0, .pin = GPIO_PIN(PORT_E, 3), .chan = 1, .avg = ADC_AVG_MAX }, [ 2] = { .dev = ADC0, .pin = GPIO_PIN(PORT_D, 7), .chan = 22, .avg = ADC_AVG_MAX }, [ 3] = { .dev = ADC0, .pin = GPIO_PIN(PORT_D, 5), .chan = 6, .avg = ADC_AVG_MAX }, [ 4] = { .dev = ADC0, .pin = GPIO_PIN(PORT_E, 0), .chan = 10, .avg = ADC_AVG_MAX }, [ 5] = { .dev = ADC0, .pin = GPIO_PIN(PORT_E, 1), .chan = 11, .avg = ADC_AVG_MAX } }; #define ADC_NUMOF ARRAY_SIZE(adc_config) /* * KW2xD ADC reference settings: * 0: VREFH/VREFL external pin pair * 1-3: reserved */ #define ADC_REF_SETTING 0 /** @} */ /** * @name PWM configuration * @{ */ static const pwm_conf_t pwm_config[] = { { .ftm = FTM0, .chan = { { .pin = GPIO_PIN(PORT_A, 4), .af = 3, .ftm_chan = 1 }, { .pin = GPIO_PIN(PORT_D, 4), .af = 4, .ftm_chan = 4 }, { .pin = GPIO_PIN(PORT_D, 6), .af = 4, .ftm_chan = 6 }, { .pin = GPIO_PIN(PORT_A, 1), .af = 3, .ftm_chan = 1 } }, .chan_numof = 4, .ftm_num = 0 } }; #define PWM_NUMOF ARRAY_SIZE(pwm_config) /** @} */ /** * @name SPI device configuration * * Clock configuration values based on the configured 48Mhz module clock. * * Auto-generated by: * cpu/kinetis/dist/calc_spi_scalers/calc_spi_scalers.c * * @{ */ static const uint32_t spi_clk_config[] = { ( SPI_CTAR_PBR(0) | SPI_CTAR_BR(8) | /* -> 93750Hz */ SPI_CTAR_PCSSCK(0) | SPI_CTAR_CSSCK(8) | SPI_CTAR_PASC(0) | SPI_CTAR_ASC(8) | SPI_CTAR_PDT(0) | SPI_CTAR_DT(8) ), ( SPI_CTAR_PBR(0) | SPI_CTAR_BR(6) | /* -> 375000Hz */ SPI_CTAR_PCSSCK(0) | SPI_CTAR_CSSCK(6) | SPI_CTAR_PASC(0) | SPI_CTAR_ASC(6) | SPI_CTAR_PDT(0) | SPI_CTAR_DT(6) ), ( SPI_CTAR_PBR(1) | SPI_CTAR_BR(4) | /* -> 1000000Hz */ SPI_CTAR_PCSSCK(1) | SPI_CTAR_CSSCK(3) | SPI_CTAR_PASC(1) | SPI_CTAR_ASC(3) | SPI_CTAR_PDT(1) | SPI_CTAR_DT(3) ), ( SPI_CTAR_PBR(2) | SPI_CTAR_BR(0) | /* -> 4800000Hz */ SPI_CTAR_PCSSCK(2) | SPI_CTAR_CSSCK(0) | SPI_CTAR_PASC(2) | SPI_CTAR_ASC(0) | SPI_CTAR_PDT(2) | SPI_CTAR_DT(0) ), ( SPI_CTAR_PBR(1) | SPI_CTAR_BR(0) | /* -> 8000000Hz */ SPI_CTAR_PCSSCK(1) | SPI_CTAR_CSSCK(0) | SPI_CTAR_PASC(1) | SPI_CTAR_ASC(0) | SPI_CTAR_PDT(1) | SPI_CTAR_DT(0) ) }; static const spi_conf_t spi_config[] = { { .dev = SPI0, .pin_miso = GPIO_PIN(PORT_C, 7), .pin_mosi = GPIO_PIN(PORT_C, 6), .pin_clk = GPIO_PIN(PORT_C, 5), .pin_cs = { GPIO_PIN(PORT_C, 4), SPI_CS_UNDEF, SPI_CS_UNDEF, SPI_CS_UNDEF, SPI_CS_UNDEF, }, .pcr = GPIO_AF_2, .simmask = SIM_SCGC6_SPI0_MASK }, { .dev = SPI1, .pin_miso = GPIO_PIN(PORT_B, 17), .pin_mosi = GPIO_PIN(PORT_B, 16), .pin_clk = GPIO_PIN(PORT_B, 11), .pin_cs = { GPIO_PIN(PORT_B, 10), SPI_CS_UNDEF, SPI_CS_UNDEF, SPI_CS_UNDEF, SPI_CS_UNDEF, }, .pcr = GPIO_AF_2, .simmask = SIM_SCGC6_SPI1_MASK } }; #define SPI_NUMOF ARRAY_SIZE(spi_config) /** @} */ /** * @name I2C configuration * @{ */ static const i2c_conf_t i2c_config[] = { { .i2c = I2C1, .scl_pin = GPIO_PIN(PORT_E, 1), .sda_pin = GPIO_PIN(PORT_E, 0), .freq = CLOCK_BUSCLOCK, .speed = I2C_SPEED_FAST, .irqn = I2C1_IRQn, .scl_pcr = (PORT_PCR_MUX(6) | PORT_PCR_ODE_MASK), .sda_pcr = (PORT_PCR_MUX(6) | PORT_PCR_ODE_MASK), }, }; #define I2C_NUMOF ARRAY_SIZE(i2c_config) #define I2C_0_ISR (isr_i2c1) /** @} */ #ifdef __cplusplus } #endif #endif /* PERIPH_CONF_H */ /** @} */