/* * Copyright (C) 2019 Inria * * This file is subject to the terms and conditions of the GNU Lesser * General Public License v2.1. See the file LICENSE in the top level * directory for more details. */ /** * @ingroup boards_stm32f723e-disco * @{ * * @file * @brief Board specific definitions for the STM32F723E-DISCO board * * @author Alexandre Abadie */ #ifndef BOARD_H #define BOARD_H #include "cpu.h" #include "periph_conf.h" #ifdef __cplusplus extern "C" { #endif /** * @name LCD Backlight control defines * @{ */ #define BACKLIGHT_PIN GPIO_PIN(PORT_H, 11) /**< Backlight pin (HIGH active LD_BL) */ #define BACKLIGHT_MASK (1 << 11) /**< Backlight pin mask */ /** Set the backlight pin */ #define BACKLIGHT_ON (GPIOH->BSRR = BACKLIGHT_MASK) /** Clear the backlight pin */ #define BACKLIGHT_OFF (GPIOH->BSRR = (BACKLIGHT_MASK << 16)) /** Toggle the backlight pin */ #define BACKLIGHT_TOGGLE (GPIOH->ODR ^= BACKLIGHT_MASK) /** @} */ /** * @name LCD display definitions * * The STM32F723G-DISCO board has a 240 x 240 pixel TFT color LCD display with * ST7789H2 driver IC using the MCU 8080 16-bit parallel interface (default with * SB15=ON and SB16=OFF). SB15 and SB16 control the ST7789H2 `IM0` signal. * With SB15=OFF and SB16=ON, the MCU 8080 8-bit parallel interface is enabled. * * For the `LCD_*` pins, please refer to the * [schematic](https://www.st.com/resource/en/schematic_pack/mb1260-f723e-d03_schematic.pdf). * * @{ */ #define LCD_SCREEN_WIDTH 240 /**< LCD width */ #define LCD_SCREEN_HEIGHT 240 /**< LCD height */ #define LCD_D0 GPIO_PIN(PORT_D, 14) /**< LCD_D0 pin */ #define LCD_D1 GPIO_PIN(PORT_D, 15) /**< LCD_D1 pin */ #define LCD_D2 GPIO_PIN(PORT_D, 0) /**< LCD_D2 pin */ #define LCD_D3 GPIO_PIN(PORT_D, 1) /**< LCD_D3 pin */ #define LCD_D4 GPIO_PIN(PORT_E, 7) /**< LCD_D4 pin */ #define LCD_D5 GPIO_PIN(PORT_E, 8) /**< LCD_D5 pin */ #define LCD_D6 GPIO_PIN(PORT_E, 9) /**< LCD_D6 pin */ #define LCD_D7 GPIO_PIN(PORT_E, 10) /**< LCD_D7 pin */ #define LCD_D8 GPIO_PIN(PORT_E, 11) /**< LCD_D8 pin */ #define LCD_D9 GPIO_PIN(PORT_E, 12) /**< LCD_D9 pin */ #define LCD_D10 GPIO_PIN(PORT_E, 13) /**< LCD_D10 pin */ #define LCD_D11 GPIO_PIN(PORT_E, 14) /**< LCD_D11 pin */ #define LCD_D12 GPIO_PIN(PORT_E, 15) /**< LCD_D12 pin */ #define LCD_D13 GPIO_PIN(PORT_D, 8) /**< LCD_D13 pin */ #define LCD_D14 GPIO_PIN(PORT_D, 9) /**< LCD_D14 pin */ #define LCD_D15 GPIO_PIN(PORT_D, 10) /**< LCD_D15 pin */ #define LCD_TE GPIO_PIN(PORT_C, 8) /**< LCD_TE pin */ #define LCD_WE GPIO_PIN(PORT_D, 5) /**< LCD_WE pin */ #define LCD_OE GPIO_PIN(PORT_D, 4) /**< LCD_OE pin */ #define LCD_RS GPIO_PIN(PORT_F, 0) /**< LCD_RS pin */ #define LCD_NE GPIO_PIN(PORT_G, 9) /**< LCD_NE pin */ #define LCD_RST GPIO_PIN(PORT_H, 7) /**< LCD_RST pin */ #define LCD_BACKLIGHT BACKLIGHT_PIN /**< LCD_BL pin */ #define ST77XX_PARAM_CNTRL ST77XX_CNTRL_ST7789 /**< ST77xx controller variant */ #define ST77XX_PARAM_SPI SPI_UNDEF /**< parallel interface is used */ #define ST77XX_PARAM_D0 LCD_D0 /**< ST77xx D0 signal */ #define ST77XX_PARAM_D1 LCD_D1 /**< ST77xx D1 signal */ #define ST77XX_PARAM_D2 LCD_D2 /**< ST77xx D2 signal */ #define ST77XX_PARAM_D3 LCD_D3 /**< ST77xx D3 signal */ #define ST77XX_PARAM_D4 LCD_D4 /**< ST77xx D4 signal */ #define ST77XX_PARAM_D5 LCD_D5 /**< ST77xx D5 signal */ #define ST77XX_PARAM_D6 LCD_D6 /**< ST77xx D6 signal */ #define ST77XX_PARAM_D7 LCD_D7 /**< ST77xx D7 signal */ #define ST77XX_PARAM_D8 LCD_D8 /**< ST77xx D8 signal */ #define ST77XX_PARAM_D9 LCD_D9 /**< ST77xx D9 signal */ #define ST77XX_PARAM_D10 LCD_D10 /**< ST77xx D10 signal */ #define ST77XX_PARAM_D11 LCD_D11 /**< ST77xx D11 signal */ #define ST77XX_PARAM_D12 LCD_D12 /**< ST77xx D12 signal */ #define ST77XX_PARAM_D13 LCD_D13 /**< ST77xx D13 signal */ #define ST77XX_PARAM_D14 LCD_D14 /**< ST77xx D14 signal */ #define ST77XX_PARAM_D15 LCD_D15 /**< ST77xx D15 signal */ #define ST77XX_PARAM_WRX LCD_WE /**< ST77xx WR signal */ #define ST77XX_PARAM_RDX LCD_OE /**< ST77xx RD signal */ #define ST77XX_PARAM_DCX LCD_RS /**< ST77xx RS signal */ #define ST77XX_PARAM_RST LCD_RST /**< ST77xx RST signal */ #define ST77XX_PARAM_CS LCD_NE /**< ST77xx CS signal */ #define ST77XX_PARAM_RGB 1 /**< ST77xx RGB mode */ #define ST77XX_PARAM_INVERTED 1 /**< ST77xx inverted colors */ #define ST77XX_PARAM_ROTATION ST77XX_ROTATION_90 /**< ST77xx rotation */ #define ST77XX_PARAM_OFFSET_X 80 /**< ST77xx offset because of rotation */ #define ST77XX_PARAM_NUM_LINES LCD_SCREEN_HEIGHT /**< ST77xx number of lines */ #define ST77XX_PARAM_RGB_CHANNELS LCD_SCREEN_WIDTH /**< ST77xx number of channels */ /** @} */ /** * @name Macros for controlling the on-board LEDs. * @{ */ #define LED0_PIN_NUM 5 #define LED0_PORT GPIO_PORT_A /**< GPIO port of LED 0 */ #define LED0_PORT_NUM PORT_A #define LED1_PIN_NUM 7 #define LED1_PORT GPIO_PORT_A /**< GPIO port of LED 1 */ #define LED1_PORT_NUM PORT_A #define LED2_PIN_NUM 1 #define LED2_PORT GPIO_PORT_B /**< GPIO port of LED 2 */ #define LED2_PORT_NUM PORT_B /** @} */ /** * @name User button * @{ */ #define BTN0_PIN GPIO_PIN(PORT_A, 0) #define BTN0_MODE GPIO_IN /** @} */ /** * @name FT5X06 touch panel configuration * @{ */ #define FT5X06_PARAM_I2C_DEV I2C_DEV(1) /**< I2C device */ #define FT5X06_PARAM_INT_PIN GPIO_PIN(PORT_I, 9) /**< Interrupt pin */ #define FT5X06_PARAM_XMAX (240) /**< Max width */ #define FT5X06_PARAM_YMAX (240) /**< Max height */ #define FT5X06_PARAM_XYCONV FT5X06_NO_CONV /**< No coordinate conversion */ #define FT5X06_PARAM_TYPE FT5X06_TYPE_FT6X06 /**< Device type */ /** @} */ #ifdef __cplusplus } #endif #include "stm32_leds.h" #endif /* BOARD_H */ /** @} */