/*
 * Copyright (C) 2017 Freie Universität Berlin
 *               2017 Inria
 *               2017 HAW-Hamburg
 *
 * This file is subject to the terms and conditions of the GNU Lesser
 * General Public License v2.1. See the file LICENSE in the top level
 * directory for more details.
 */

/**
 * @ingroup     boards_nucleo-l476rg
 * @{
 *
 * @file
 * @brief       Peripheral MCU configuration for the nucleo-l476rg board
 *
 * @author      Hauke Petersen <hauke.petersen@fu-berlin.de>
 * @author      Alexandre Abadie <alexandre.abadie@inria.fr>
 * @author      Michel Rottleuthner <michel.rottleuthner@haw-hamburg.de>
 */

#ifndef PERIPH_CONF_H
#define PERIPH_CONF_H

#include "periph_cpu.h"
#include "l4/cfg_clock_default.h"
#include "cfg_i2c1_pb8_pb9.h"
#include "cfg_rtt_default.h"

#ifdef __cplusplus
extern "C" {
#endif

/**
 * @name    DMA streams configuration
 * @{
 */
static const dma_conf_t dma_config[] = {
    { .stream = 1 },    /* DMA1 Channel 2 - SPI1_RX | USART3_TX */
    { .stream = 2 },    /* DMA1 Channel 3 - SPI1_TX */
    { .stream = 3 },    /* DMA1 Channel 4 - USART1_TX */
    { .stream = 6 },    /* DMA1 Channel 7 - USART2_TX */
};

#define DMA_0_ISR  isr_dma1_channel2
#define DMA_1_ISR  isr_dma1_channel3
#define DMA_2_ISR  isr_dma1_channel4
#define DMA_3_ISR  isr_dma1_channel7

#define DMA_NUMOF           ARRAY_SIZE(dma_config)
/** @} */


/**
 * @name    Timer configuration
 * @{
 */
static const timer_conf_t timer_config[] = {
    {
        .dev      = TIM5,
        .max      = 0xffffffff,
        .rcc_mask = RCC_APB1ENR1_TIM5EN,
        .bus      = APB1,
        .irqn     = TIM5_IRQn
    }
};

#define TIMER_0_ISR         isr_tim5

#define TIMER_NUMOF         ARRAY_SIZE(timer_config)
/** @} */

/**
 * @name    UART configuration
 * @{
 */
static const uart_conf_t uart_config[] = {
    {
        .dev        = USART2,
        .rcc_mask   = RCC_APB1ENR1_USART2EN,
        .rx_pin     = GPIO_PIN(PORT_A, 3),
        .tx_pin     = GPIO_PIN(PORT_A, 2),
        .rx_af      = GPIO_AF7,
        .tx_af      = GPIO_AF7,
        .bus        = APB1,
        .irqn       = USART2_IRQn,
        .type       = STM32_USART,
        .clk_src    = 0, /* Use APB clock */
#ifdef MODULE_PERIPH_DMA
        .dma        = 3,
        .dma_chan   = 2
#endif
    },
    {
        .dev        = USART3,
        .rcc_mask   = RCC_APB1ENR1_USART3EN,
        .rx_pin     = GPIO_PIN(PORT_C, 11),
        .tx_pin     = GPIO_PIN(PORT_C, 10),
        .rx_af      = GPIO_AF7,
        .tx_af      = GPIO_AF7,
        .bus        = APB1,
        .irqn       = USART3_IRQn,
        .type       = STM32_USART,
        .clk_src    = 0, /* Use APB clock */
#ifdef MODULE_PERIPH_DMA
        .dma        = 0,
        .dma_chan   = 2
#endif
    },
    {
        .dev        = USART1,
        .rcc_mask   = RCC_APB2ENR_USART1EN,
        .rx_pin     = GPIO_PIN(PORT_A, 10),
        .tx_pin     = GPIO_PIN(PORT_A, 9),
        .rx_af      = GPIO_AF7,
        .tx_af      = GPIO_AF7,
        .bus        = APB2,
        .irqn       = USART1_IRQn,
        .type       = STM32_USART,
        .clk_src    = 0, /* Use APB clock */
#ifdef MODULE_PERIPH_DMA
        .dma        = 2,
        .dma_chan   = 2
#endif
    }
};

#define UART_0_ISR          (isr_usart2)
#define UART_1_ISR          (isr_usart3)
#define UART_2_ISR          (isr_usart1)

#define UART_NUMOF          ARRAY_SIZE(uart_config)
/** @} */

/**
 * @name    PWM configuration
 * @{
 */
static const pwm_conf_t pwm_config[] = {
    {
        .dev      = TIM2,
        .rcc_mask = RCC_APB1ENR1_TIM2EN,
        .chan     = { { .pin = GPIO_PIN(PORT_A, 15), .cc_chan = 0},
                      { .pin = GPIO_PIN(PORT_B,  3), .cc_chan = 1},
                      { .pin = GPIO_PIN(PORT_B, 10), .cc_chan = 2},
                      { .pin = GPIO_PIN(PORT_B, 11), .cc_chan = 3} },
        .af       = GPIO_AF1,
        .bus      = APB1
    },
    {
        .dev      = TIM3,
        .rcc_mask = RCC_APB1ENR1_TIM3EN,
        .chan     = { { .pin = GPIO_PIN(PORT_B, 4), .cc_chan = 0 },
                      { .pin = GPIO_UNDEF, .cc_chan = 0 },
                      { .pin = GPIO_UNDEF, .cc_chan = 0 },
                      { .pin = GPIO_UNDEF, .cc_chan = 0 } },
        .af       = GPIO_AF2,
        .bus      = APB1
    },
    {
        .dev      = TIM8,
        .rcc_mask = RCC_APB2ENR_TIM8EN,
        .chan     = { { .pin = GPIO_PIN(PORT_C, 6), .cc_chan = 0},
                      { .pin = GPIO_PIN(PORT_C, 7), .cc_chan = 1},
                      { .pin = GPIO_PIN(PORT_C, 8), .cc_chan = 2},
                      { .pin = GPIO_PIN(PORT_C, 9), .cc_chan = 3} },
        .af       = GPIO_AF3,
        .bus      = APB2
    }
};

#define PWM_NUMOF           ARRAY_SIZE(pwm_config)
/** @} */

/**
 * @name    SPI configuration
 * @{
 */
static const spi_conf_t spi_config[] = {
    {
        .dev      = SPI1,
        .mosi_pin = GPIO_PIN(PORT_A, 7),
        .miso_pin = GPIO_PIN(PORT_A, 6),
        .sclk_pin = GPIO_PIN(PORT_A, 5),
        .cs_pin   = GPIO_UNDEF,
        .mosi_af  = GPIO_AF5,
        .miso_af  = GPIO_AF5,
        .sclk_af  = GPIO_AF5,
        .cs_af    = GPIO_AF5,
        .rccmask  = RCC_APB2ENR_SPI1EN,
        .apbbus   = APB2,
#ifdef MODULE_PERIPH_DMA
        .tx_dma   = 1,
        .tx_dma_chan = 1,
        .rx_dma   = 0,
        .rx_dma_chan = 1,
#endif
    }
};

#define SPI_NUMOF           ARRAY_SIZE(spi_config)
/** @} */

/**
 * @name    ADC configuration
 *
 * configure only  ADC channels for the Arduino header pins A0-A5
 *
 * @{
 */
static const adc_conf_t adc_config[] = {
    {GPIO_PIN(PORT_A, 0), 0, 5},  /*< ADC12_IN5 */
    {GPIO_PIN(PORT_A, 1), 0, 6},  /*< ADC12_IN6 */
    {GPIO_PIN(PORT_A, 4), 1, 9},  /*< ADC12_IN9 */
    {GPIO_PIN(PORT_B, 0), 1, 15}, /*< ADC12_IN15 */
    {GPIO_PIN(PORT_C, 1), 2, 2},  /*< ADC123_IN_2 */
    {GPIO_PIN(PORT_C, 0), 2, 1},  /*< ADC123_IN_1 */
};

#define ADC_NUMOF           ARRAY_SIZE(adc_config)
/** @} */

#ifdef __cplusplus
}
#endif

#endif /* PERIPH_CONF_H */
/** @} */