/* * Copyright (C) 2017 DAI Labor Technische Universität Berlin * * This file is subject to the terms and conditions of the GNU Lesser General * Public License v2.1. See the file LICENSE in the top level directory for more * details. */ /** * @ingroup boards_firefly * @{ * * @file * @brief Peripheral MCU configuration for the Firefly board revision A * * @author Anon Mall */ #ifndef PERIPH_CONF_H #define PERIPH_CONF_H #include "periph_common.h" #ifdef __cplusplus extern "C" { #endif /** * @name I2C configuration * @{ */ #define I2C_NUMOF 1 #define I2C_0_EN 1 #define I2C_IRQ_PRIO 1 /* I2C 0 device configuration */ #define I2C_0_DEV 0 #define I2C_0_IRQ I2C_IRQn #define I2C_0_IRQ_HANDLER isr_i2c #define I2C_0_SCL_PIN GPIO_PIN(PORT_C, 3) #define I2C_0_SDA_PIN GPIO_PIN(PORT_C, 2) static const i2c_conf_t i2c_config[I2C_NUMOF] = { { .speed = I2C_SPEED_FAST, /**< bus speed */ .scl_pin = I2C_0_SCL_PIN, .sda_pin = I2C_0_SDA_PIN, }, }; /** @} */ /** * @name SPI configuration * @{ */ static const spi_conf_t spi_config[] = { { .num = 0, .mosi_pin = GPIO_PIN(PORT_B, 1), .miso_pin = GPIO_PIN(PORT_B, 3), .sck_pin = GPIO_PIN(PORT_B, 2), .cs_pin = GPIO_UNDEF }, { .num = 1, .mosi_pin = GPIO_PIN(PORT_C, 5), .miso_pin = GPIO_PIN(PORT_C, 6), .sck_pin = GPIO_PIN(PORT_C, 4), .cs_pin = GPIO_PIN(PORT_A, 7) } }; #define SPI_NUMOF (sizeof(spi_config) / sizeof(spi_config[0])) /** @} */ /** * @name ADC configuration * @{ */ #define SOC_ADC_ADCCON3_EREF SOC_ADC_ADCCON3_EREF_AVDD5 static const adc_conf_t adc_config[] = { GPIO_PIN(PORT_A, 5), /**< GPIO_PA5 = ADC1_PIN */ GPIO_PIN(PORT_A, 4), /**< GPIO_PA4 = ADC2_PIN */ /* voltage divider with 5/3 relationship to allow 5V sensors */ GPIO_PIN(PORT_A, 2), /**< GPIO_PA2 = ADC3_PIN */ }; #define ADC_NUMOF (sizeof(adc_config) / sizeof(adc_config[0])) /** @} */ #ifdef __cplusplus } /* end extern "C" */ #endif #endif /* PERIPH_CONF_H */ /** @} */