/**
@defgroup    boards_z1 Zolertia Z1
@ingroup     boards
@brief       Support for the Zolertia Z1 board.

# Components

| MCU | [MSP430F2617](http://zolertia.sourceforge.net/wiki/index.php/Mainpage:z1#MSP430F2617_MCU_from_Texas_Instruments) |
|-----|-----------------------------------------------------------------------------------------------------------------------|
| Radio | [CC2420](http://zolertia.sourceforge.net/wiki/index.php/Mainpage:z1#CC2420_Transceiver_from_Texas_Instruments_.2F_Chipcon) |
|  | [Embedded CeramicAntenna](http://zolertia.sourceforge.net/wiki/index.php/Mainpage:z1#Antennae) |
| USB-to-Serial |[CP2102](http://zolertia.sourceforge.net/wiki/index.php/Mainpage:z1#CP2102_USB-to-UART_Bridge_Controller_from_SiLabs) |
| Sensors | [ADXL345](http://zolertia.sourceforge.net/wiki/index.php/Z1_Sensors#ADXL345_Accelerometer) 3-axis digital accelerometer |
|  | [TMP102](http://zolertia.sourceforge.net/wiki/index.php/Z1_Sensors#TMP102_Temperature) Thermometer from Texas Instruments |

# Todo

The two sensors listed above are not supported yet, this will be done as soon
as possible. If someone starts working on this, please open an issue and share
the link right here.

# Options

The Z1 starter platform -- an extended version with some supplementary basic
actuators, phidgets and ziglets connectors, SMA-RP connector for a concrete
antenna, battery (2xAA) enclosure, and MSP430 JTAG connector
-- is [also available](https://github.com/Zolertia/Resources/wiki/The-Z1-mote).
This RIOT port also supports this version, except that supplementary
actuators (multi-color LED, wheel potentiometer, buzzer) are not directly
defined. This will be done as soon as possible.

# Layout

![layout](http://zolertia.sourceforge.net/wiki/images/4/4f/Z1-B-medium.png)

# Flashing

RIOT comes with a version of `goodfet.bsl`, a flashing tool for MSP430 based
platforms.
Just link or copy it somewhere into your `$PATH` and you are good to go.
e.g.
```
Bash
$> cp /path/to/RIOT/dist/tools/goodfet/goodfet.bsl /usr/local/bin
```
 */