/**
@defgroup    boards_msb430h MSB-430H
@ingroup     boards
@brief       Support for the ScatterWeb MSB-430H board

## Hardware

![ScatterWeb MSB-430H](http://riot-os.org/images/msb-430h_2.png)

## MCU
| MCU                           | TI MSP430F1612        |
|:----------------------------- |:--------------------- |
| Family                        | MSP430                |
| Vendor                        | Texas Instruments     |
| Package                       | 64 QFN                |
| RAM                           | 5KiB                  |
| Flash                         | 55KiB                 |
| Frequency                     | 8MHz                  |
| FPU                           | no                    |
| Timers                        | 2 (2x 16bit)          |
| ADCs                          | 1x 8 channel 12-bit   |
| UARTs                         | 2                     |
| SPIs                          | 2                     |
| I2Cs                          | 1                     |
| Vcc                           | 2.0V - 3.6V           |
| Datasheet / Reference Manual  | [Datasheet](https://www.mi.fu-berlin.de/inf/groups/ag-tech/projects/ScatterWeb/moduleComponents/msp430f1612.pdf) |
| User Guide                    | [User Guide](https://www.mi.fu-berlin.de/inf/groups/ag-tech/projects/ScatterWeb/moduleComponents/MSP430slau049f.pdf)|

## Radio

| RF Chip               | Texas Instruments® CC1100                     |
|:--------------------- |:--------------------------------------------- |
| Frequency Band        | 300-348MHz, 400-464 MHz, and 800-928 MHz      |
| Standard compliance   | DASH7 compliant                               |
| Receive Sensitivity   | -94dBm typ                                    |
| Transfer Rate         | 500kBaud                                      |
| RF Power              | -30dBm ~ 10dBm                                |
| Current Draw          | RX: 14.4mA TX: 16.9mA Sleep mode: 400nA       |
| RF Power Supply       | 2.1V ~ 3.6V                                   |
| Antenna               | Dipole Antenna / PCB Antenna                  |
| Datasheet             | [Datasheet](http://www.ti.com/lit/gpn/cc1100) |

## Flashing RIOT

Flashing RIOT on the MSB-430H is quite straight forward, just connect your
board using a JTAG adapter (either the original one from TI or an [Olimex
version](https://www.olimex.com/Products/MSP430/JTAG/)) to your host computer
and type:

`make flash`

This should take care of everything!

## Using the shell

The shell is using the UART interface of the MSB-430H at 115200 baud. You
need a 3.3V TTL serial cable. For USB connections you could use a FTDI connector.

## More information

[FU Berlin info page on the MSB-430H](https://www.mi.fu-berlin.de/inf/groups/ag-tech/projects/ScatterWeb/modules/mod_MSB-430H.html)
 */