/* * Copyright (C) 2014 Loci Controls Inc. * * This file is subject to the terms and conditions of the GNU Lesser * General Public License v2.1. See the file LICENSE in the top level * directory for more details. */ /** * @ingroup boards_cc2538dk * @{ * * @file * @brief Peripheral MCU configuration for the CC2538DK board * * @author Ian Martin */ #ifndef PERIPH_CONF_H #define PERIPH_CONF_H #include "cpu.h" #include "periph_cpu.h" #include "cfg_clk_default.h" #include "cfg_timer_default.h" #ifdef __cplusplus extern "C" { #endif /** * @name UART configuration * @{ */ static const uart_conf_t uart_config[] = { { .dev = UART0_BASEADDR, .rx_pin = GPIO_PIN(0, 0), .tx_pin = GPIO_PIN(0, 1), #ifdef MODULE_PERIPH_UART_HW_FC .cts_pin = GPIO_UNDEF, .rts_pin = GPIO_UNDEF #endif } }; /* interrupt function name mapping */ #define UART_0_ISR isr_uart0 /* macros common across all UARTs */ #define UART_NUMOF ARRAY_SIZE(uart_config) /** @} */ /** * @name I2C configuration * @{ */ #define I2C_IRQ_PRIO 1 static const i2c_conf_t i2c_config[] = { { .speed = I2C_SPEED_FAST, /**< bus speed */ .scl_pin = GPIO_PIN(0, 2), /**< GPIO_PA2, SPI_SCK on SmartRF06 */ .sda_pin = GPIO_PIN(0, 4) /**< GPIO_PA4, SPI_MOSI on SmartRF06 */ }, }; #define I2C_NUMOF ARRAY_SIZE(i2c_config) /** @} */ /** * @name SPI configuration * @{ */ static const spi_conf_t spi_config[] = { { .num = 0, .mosi_pin = GPIO_PIN(0, 4), .miso_pin = GPIO_PIN(0, 5), .sck_pin = GPIO_PIN(0, 2), .cs_pin = GPIO_PIN(3, 0) } }; #define SPI_NUMOF ARRAY_SIZE(spi_config) /** @} */ /** * @name ADC configuration * @{ */ #define SOC_ADC_ADCCON3_EREF SOC_ADC_ADCCON3_EREF_AVDD5 static const adc_conf_t adc_config[] = { GPIO_PIN(0, 6), /**< GPIO_PA6 = ADC_ALS_PIN */ }; #define ADC_NUMOF ARRAY_SIZE(adc_config) /** @} */ #ifdef __cplusplus } /* end extern "C" */ #endif #endif /* PERIPH_CONF_H */ /** @} */