# Copyright (c) 2020 Inria
#
# This file is subject to the terms and conditions of the GNU Lesser
# General Public License v2.1. See the file LICENSE in the top level
# directory for more details.
#

config BOARD
    default "stm32l496g-disco" if BOARD_STM32L496G_DISCO

config BOARD_STM32L496G_DISCO
    bool
    default y
    select CPU_MODEL_STM32L496AG

    # Put defined MCU peripherals here (in alphabetical order)
    select HAS_PERIPH_ADC
    select HAS_PERIPH_DAC
    select HAS_PERIPH_DMA
    select HAS_PERIPH_FMC
    select HAS_PERIPH_FMC_NOR_SRAM
    select HAS_PERIPH_FMC_16BIT
    select HAS_PERIPH_I2C
    select HAS_PERIPH_LPUART
    select HAS_PERIPH_RTC
    select HAS_PERIPH_RTT
    select HAS_PERIPH_PWM
    select HAS_PERIPH_SPI
    select HAS_PERIPH_SPI_STMOD
    select HAS_PERIPH_TIMER
    select HAS_PERIPH_UART
    select HAS_PERIPH_UART_HW_FC
    select HAS_PERIPH_USBDEV

    # Put other features for this board (in alphabetical order)
    select HAS_ARDUINO_ANALOG
    select HAS_ARDUINO_PINS
    select HAS_RIOTBOOT
    select HAS_TINYUSB_DEVICE

    # Clock configuration
    select BOARD_HAS_LSE

    select HAVE_SAUL_GPIO
    select HAVE_FT5X06
    select HAVE_ST7789
    select HAVE_LCD_PARALLEL_16BIT if MODULE_ST7789
    select HAVE_LCD_PARALLEL_LL_MCU if MODULE_ST7789

    select MODULE_PERIPH_LPUART if MODULE_PERIPH_UART
    select MODULE_PERIPH_UART_HW_FC if MODULE_PERIPH_UART && !MODULE_PERIPH_SPI_STMOD && HAS_PERIPH_UART_HW_FC

source "$(RIOTBOARD)/common/stm32/Kconfig"

config HAS_PERIPH_SPI_STMOD
    bool
    help
        Indicates that SPI2 can be connected to STMod+/Pmod connector

config MODULE_PERIPH_SPI_STMOD
    bool "SPI2 connected to STMod+/Pmod connector"
    depends on HAS_PERIPH_SPI_MOD
    default n
    help
        By default, solder bridges SB6, SB7, SB8 are closed and USART1 is
        connected to the Pmod/STMmod+ connector. If these solder bridges are
        open and solder bridges SB4, SB5 and SB6 are closed instead, SPI2 is
        connected to the STMmod+/Pmod connector. Say yes to use SPI2 with this
        board configuration.