# Copyright (c) 2020 Freie Universitaet Berlin
#               2020 HAW Hamburg
#
# This file is subject to the terms and conditions of the GNU Lesser
# General Public License v2.1. See the file LICENSE in the top level
# directory for more details.
#

config MODULE_MMA8X5X
    bool "MMA8x5x Accelerometer"
    depends on HAS_PERIPH_I2C
    depends on TEST_KCONFIG
    select MODULE_PERIPH_I2C

config HAVE_MMA8X5X
    bool
    select MODULE_MMA8X5X if MODULE_SAUL_DEFAULT
    help
      Indicates that an mma8x5x accelerometer is present.

menuconfig KCONFIG_USEMODULE_MMA8X5X
    bool "Configure MMA8X5X driver"
    depends on USEMODULE_MMA8X5X
    help
        Configure the MMA8X5X driver using Kconfig.

if KCONFIG_USEMODULE_MMA8X5X

config MMA8X5X_I2C_ADDRESS
    hex "Default I2C address"
    range 0x1C 0x1D
    default 0x1D
    help
        The address value depends on the state of SA0 Address Pin
        in the case of MMA845x series sensors.
        For more details refer Table 1 in datasheet
        (MMA8451Q/MMA8452Q/MMA8453Q)
        Default value corresponds to SA0 connected to VCC.

endif # KCONFIG_USEMODULE_MMA8X5X

config HAVE_MMA8X5X
    bool
    select MODULE_MMA8X5X if MODULE_SAUL_DEFAULT
    help
        Indicates that a MMA8x5x is present