# Copyright (c) 2020 HAW Hamburg
#
# This file is subject to the terms and conditions of the GNU Lesser
# General Public License v2.1. See the file LICENSE in the top level
# directory for more details.
#

menuconfig MODULE_MRF24J40
    bool
    prompt "MRF24J40 radio" if !(MODULE_NETDEV_DEFAULT && HAVE_MRF24J40)
    default (MODULE_NETDEV_DEFAULT && HAVE_MRF24J40)
    depends on TEST_KCONFIG
    depends on HAS_PERIPH_GPIO
    depends on HAS_PERIPH_GPIO_IRQ
    depends on HAS_PERIPH_SPI
    select MODULE_PERIPH_GPIO
    select MODULE_PERIPH_GPIO_IRQ
    select MODULE_PERIPH_SPI
    select MODULE_IEEE802154
    select MODULE_ZTIMER_USEC
    select HAVE_BHP_IRQ_HANDLER
    select HAVE_IEEE802154_RADIO_HAL_INTERFACE
    select MRF24J40_OQPSK if MODULE_NETDEV

if MODULE_MRF24J40

choice MRF24J40_VARIANT
    bool "Variant"
    default MODULE_MRF24J40MA if HAVE_MRF24J40MA
    default MODULE_MRF24J40MB if HAVE_MRF24J40MB
    default MODULE_MRF24J40MC if HAVE_MRF24J40MC
    default MODULE_MRF24J40MD if HAVE_MRF24J40MD
    default MODULE_MRF24J40ME if HAVE_MRF24J40ME

# the generic module matches this variant
config MRF24J40
    bool "MRF24J40"

config MODULE_MRF24J40MA
    bool "MRF24J40MA"

config MODULE_MRF24J40MB
    bool "MRF24J40MB"

config MODULE_MRF24J40MC
    bool "MRF24J40MC"

config MODULE_MRF24J40MD
    bool "MRF24J40MD"

config MODULE_MRF24J40ME
    bool "MRF24J40ME"

endchoice

config MRF24J40_OQPSK
    bool "OQPSK support"
    default y if !MRF24J40
    select MODULE_NETDEV_IEEE802154_OQPSK

config MRF24J40_USE_EXT_PA_LNA
    bool "Enable external PA/LNA control"
    default y
    depends on !MODULE_MRF24J40MA
    help
        Increase RSSI for MRF24J40MC/MD/ME devices. No effect on MRF24J40MA.
        For more information, please refer to section 4.2 of MRF24J40 datasheet.

config MRF24J40_TEST_SPI_CONNECTION
    bool "Enable basic self-test on init"
    help
        Perform a write / read to a known register on startup to detect if the
        device is connected. Enable this if you want the boot not to hang if the
        device is not connected / there are SPI errors.

endif # MODULE_MRF24J40

config HAVE_MRF24J40
    bool
    help
        Indicates that a MRF24J40 radio is present.

config HAVE_MRF24J40MA
    bool
    select HAVE_MRF24J40
    help
        Indicates that a MRF24J40MA radio is present.

config HAVE_MRF24J40MB
    bool
    select HAVE_MRF24J40
    help
        Indicates that a MRF24J40MB radio is present.

config HAVE_MRF24J40MC
    bool
    select HAVE_MRF24J40
    help
        Indicates that a MRF24J40MC radio is present.

config HAVE_MRF24J40MD
    bool
    select HAVE_MRF24J40
    help
        Indicates that a MRF24J40MD radio is present.

config HAVE_MRF24J40ME
    bool
    select HAVE_MRF24J40
    help
        Indicates that a MRF24J40ME radio is present.


menuconfig KCONFIG_USEMODULE_MRF24J40
    bool "Configure MRF24J40 driver"
    depends on USEMODULE_MRF24J40
    help
        Configure the MRF24J40 driver using Kconfig.

if KCONFIG_USEMODULE_MRF24J40

config MRF24J40_USE_EXT_PA_LNA
    bool "Enable external PA/LNA control"
    default y
    depends on !USEMODULE_MRF24J40MA
    help
        Increase RSSI for MRF24J40MC/MD/ME devices. No effect on MRF24J40MA.
        For more information, please refer to section 4.2 of MRF24J40 datasheet.

config MRF24J40_TEST_SPI_CONNECTION
    bool "Enable basic self-test on init"
    help
        Perform a write / read to a known register on startup to detect if the
        device is connected. Enable this if you want the boot not to hang if the
        device is not connected / there are SPI errors.

endif # KCONFIG_USEMODULE_MRF24J40