/******************************************************************************
*  Filename:       hw_ssi_h
*  Revised:        2017-01-31 09:37:48 +0100 (Tue, 31 Jan 2017)
*  Revision:       48345
*
* Copyright (c) 2015 - 2017, Texas Instruments Incorporated
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* 1) Redistributions of source code must retain the above copyright notice,
*    this list of conditions and the following disclaimer.
*
* 2) Redistributions in binary form must reproduce the above copyright notice,
*    this list of conditions and the following disclaimer in the documentation
*    and/or other materials provided with the distribution.
*
* 3) Neither the name of the ORGANIZATION nor the names of its contributors may
*    be used to endorse or promote products derived from this software without
*    specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
******************************************************************************/

#ifndef __HW_SSI_H__
#define __HW_SSI_H__

//*****************************************************************************
//
// This section defines the register offsets of
// SSI component
//
//*****************************************************************************
// Control 0
#define SSI_O_CR0                                                   0x00000000

// Control 1
#define SSI_O_CR1                                                   0x00000004

// Data
#define SSI_O_DR                                                    0x00000008

// Status
#define SSI_O_SR                                                    0x0000000C

// Clock Prescale
#define SSI_O_CPSR                                                  0x00000010

// Interrupt Mask Set and Clear
#define SSI_O_IMSC                                                  0x00000014

// Raw Interrupt Status
#define SSI_O_RIS                                                   0x00000018

// Masked Interrupt Status
#define SSI_O_MIS                                                   0x0000001C

// Interrupt Clear
#define SSI_O_ICR                                                   0x00000020

// DMA Control
#define SSI_O_DMACR                                                 0x00000024

//*****************************************************************************
//
// Register: SSI_O_CR0
//
//*****************************************************************************
// Field:  [15:8] SCR
//
// Serial clock rate:
// This is used to generate the transmit and receive bit rate of the SSI. The
// bit rate is
// (SSI's clock frequency)/((SCR+1)*CPSR.CPSDVSR).
// SCR is a value from 0-255.
#define SSI_CR0_SCR_W                                                        8
#define SSI_CR0_SCR_M                                               0x0000FF00
#define SSI_CR0_SCR_S                                                        8

// Field:     [7] SPH
//
// CLKOUT phase (Motorola SPI frame format only)
// This bit selects the clock edge that captures data and enables it to change
// state. It
// has the most impact on the first bit transmitted by either permitting or not
// permitting a clock transition before the first data capture edge.
// ENUMs:
// 2ND_CLK_EDGE             Data is captured on the second clock edge
//                          transition.
// 1ST_CLK_EDGE             Data is captured on the first clock edge
//                          transition.
#define SSI_CR0_SPH                                                 0x00000080
#define SSI_CR0_SPH_BITN                                                     7
#define SSI_CR0_SPH_M                                               0x00000080
#define SSI_CR0_SPH_S                                                        7
#define SSI_CR0_SPH_2ND_CLK_EDGE                                    0x00000080
#define SSI_CR0_SPH_1ST_CLK_EDGE                                    0x00000000

// Field:     [6] SPO
//
// CLKOUT polarity (Motorola SPI frame format only)
// ENUMs:
// HIGH                     SSI produces a steady state HIGH value on the
//                          CLKOUT pin when data is not being transferred.
// LOW                      SSI produces a steady state LOW value on the
//                          CLKOUT pin when data is
//                          not being transferred.
#define SSI_CR0_SPO                                                 0x00000040
#define SSI_CR0_SPO_BITN                                                     6
#define SSI_CR0_SPO_M                                               0x00000040
#define SSI_CR0_SPO_S                                                        6
#define SSI_CR0_SPO_HIGH                                            0x00000040
#define SSI_CR0_SPO_LOW                                             0x00000000

// Field:   [5:4] FRF
//
// Frame format.
// The supported frame formats are Motorola SPI, TI synchronous serial and
// National Microwire.
// Value 0'b11 is reserved and shall not be used.
// ENUMs:
// NATIONAL_MICROWIRE       National Microwire frame format
// TI_SYNC_SERIAL           TI synchronous serial frame format
// MOTOROLA_SPI             Motorola SPI frame format
#define SSI_CR0_FRF_W                                                        2
#define SSI_CR0_FRF_M                                               0x00000030
#define SSI_CR0_FRF_S                                                        4
#define SSI_CR0_FRF_NATIONAL_MICROWIRE                              0x00000020
#define SSI_CR0_FRF_TI_SYNC_SERIAL                                  0x00000010
#define SSI_CR0_FRF_MOTOROLA_SPI                                    0x00000000

// Field:   [3:0] DSS
//
// Data Size Select.
// Values 0b0000, 0b0001, 0b0010 are reserved and shall not be used.
// ENUMs:
// 16_BIT                   16-bit data
// 15_BIT                   15-bit data
// 14_BIT                   14-bit data
// 13_BIT                   13-bit data
// 12_BIT                   12-bit data
// 11_BIT                   11-bit data
// 10_BIT                   10-bit data
// 9_BIT                    9-bit data
// 8_BIT                    8-bit data
// 7_BIT                    7-bit data
// 6_BIT                    6-bit data
// 5_BIT                    5-bit data
// 4_BIT                    4-bit data
#define SSI_CR0_DSS_W                                                        4
#define SSI_CR0_DSS_M                                               0x0000000F
#define SSI_CR0_DSS_S                                                        0
#define SSI_CR0_DSS_16_BIT                                          0x0000000F
#define SSI_CR0_DSS_15_BIT                                          0x0000000E
#define SSI_CR0_DSS_14_BIT                                          0x0000000D
#define SSI_CR0_DSS_13_BIT                                          0x0000000C
#define SSI_CR0_DSS_12_BIT                                          0x0000000B
#define SSI_CR0_DSS_11_BIT                                          0x0000000A
#define SSI_CR0_DSS_10_BIT                                          0x00000009
#define SSI_CR0_DSS_9_BIT                                           0x00000008
#define SSI_CR0_DSS_8_BIT                                           0x00000007
#define SSI_CR0_DSS_7_BIT                                           0x00000006
#define SSI_CR0_DSS_6_BIT                                           0x00000005
#define SSI_CR0_DSS_5_BIT                                           0x00000004
#define SSI_CR0_DSS_4_BIT                                           0x00000003

//*****************************************************************************
//
// Register: SSI_O_CR1
//
//*****************************************************************************
// Field:     [3] SOD
//
// Slave-mode output disabled
// This bit is relevant only in the slave mode, MS=1. In multiple-slave
// systems, it is possible for an SSI master to broadcast a message to all
// slaves in the system while ensuring that only one slave drives data onto its
// serial output line. In such systems the RXD lines from multiple slaves could
// be tied together. To operate in such systems, this bitfield can be set if
// the SSI slave is not supposed to drive the TXD line:
//
// 0: SSI can drive the TXD output in slave mode.
// 1: SSI cannot drive the TXD output in slave mode.
#define SSI_CR1_SOD                                                 0x00000008
#define SSI_CR1_SOD_BITN                                                     3
#define SSI_CR1_SOD_M                                               0x00000008
#define SSI_CR1_SOD_S                                                        3

// Field:     [2] MS
//
// Master or slave mode select. This bit can be modified only when SSI is
// disabled, SSE=0.
// ENUMs:
// SLAVE                    Device configured as slave
// MASTER                   Device configured as master
#define SSI_CR1_MS                                                  0x00000004
#define SSI_CR1_MS_BITN                                                      2
#define SSI_CR1_MS_M                                                0x00000004
#define SSI_CR1_MS_S                                                         2
#define SSI_CR1_MS_SLAVE                                            0x00000004
#define SSI_CR1_MS_MASTER                                           0x00000000

// Field:     [1] SSE
//
// Synchronous serial interface enable.
// ENUMs:
// SSI_ENABLED              Operation enabled
// SSI_DISABLED             Operation disabled
#define SSI_CR1_SSE                                                 0x00000002
#define SSI_CR1_SSE_BITN                                                     1
#define SSI_CR1_SSE_M                                               0x00000002
#define SSI_CR1_SSE_S                                                        1
#define SSI_CR1_SSE_SSI_ENABLED                                     0x00000002
#define SSI_CR1_SSE_SSI_DISABLED                                    0x00000000

// Field:     [0] LBM
//
// Loop back mode:
//
// 0: Normal serial port operation enabled.
// 1: Output of transmit serial shifter is connected to input of receive serial
// shifter internally.
#define SSI_CR1_LBM                                                 0x00000001
#define SSI_CR1_LBM_BITN                                                     0
#define SSI_CR1_LBM_M                                               0x00000001
#define SSI_CR1_LBM_S                                                        0

//*****************************************************************************
//
// Register: SSI_O_DR
//
//*****************************************************************************
// Field:  [15:0] DATA
//
// Transmit/receive data
// The values read from this field or written to this field must be
// right-justified when SSI is programmed for a data size that is less than 16
// bits (CR0.DSS != 0b1111). Unused bits at the top are ignored by transmit
// logic. The receive logic automatically right-justifies.
#define SSI_DR_DATA_W                                                       16
#define SSI_DR_DATA_M                                               0x0000FFFF
#define SSI_DR_DATA_S                                                        0

//*****************************************************************************
//
// Register: SSI_O_SR
//
//*****************************************************************************
// Field:     [4] BSY
//
// Serial interface busy:
//
// 0: SSI is idle
// 1: SSI is currently transmitting and/or receiving a frame or the transmit
// FIFO is not empty.
#define SSI_SR_BSY                                                  0x00000010
#define SSI_SR_BSY_BITN                                                      4
#define SSI_SR_BSY_M                                                0x00000010
#define SSI_SR_BSY_S                                                         4

// Field:     [3] RFF
//
// Receive FIFO full:
//
// 0: Receive FIFO is not full.
// 1: Receive FIFO is full.
#define SSI_SR_RFF                                                  0x00000008
#define SSI_SR_RFF_BITN                                                      3
#define SSI_SR_RFF_M                                                0x00000008
#define SSI_SR_RFF_S                                                         3

// Field:     [2] RNE
//
// Receive FIFO not empty
//
// 0: Receive FIFO is empty.
// 1: Receive FIFO is not empty.
#define SSI_SR_RNE                                                  0x00000004
#define SSI_SR_RNE_BITN                                                      2
#define SSI_SR_RNE_M                                                0x00000004
#define SSI_SR_RNE_S                                                         2

// Field:     [1] TNF
//
// Transmit FIFO not full:
//
// 0: Transmit FIFO is full.
// 1: Transmit FIFO is not full.
#define SSI_SR_TNF                                                  0x00000002
#define SSI_SR_TNF_BITN                                                      1
#define SSI_SR_TNF_M                                                0x00000002
#define SSI_SR_TNF_S                                                         1

// Field:     [0] TFE
//
// Transmit FIFO empty:
//
// 0: Transmit FIFO is not empty.
// 1: Transmit FIFO is empty.
#define SSI_SR_TFE                                                  0x00000001
#define SSI_SR_TFE_BITN                                                      0
#define SSI_SR_TFE_M                                                0x00000001
#define SSI_SR_TFE_S                                                         0

//*****************************************************************************
//
// Register: SSI_O_CPSR
//
//*****************************************************************************
// Field:   [7:0] CPSDVSR
//
// Clock prescale divisor:
// This field specifies the division factor by which the input system clock to
// SSI must be internally divided before further use.
// The value programmed into this field must be an even non-zero number
// (2-254). The least significant bit of the programmed number is hard-coded to
// zero. If an odd number is written to this register, data read back from
// this register has the least significant bit as zero.
#define SSI_CPSR_CPSDVSR_W                                                   8
#define SSI_CPSR_CPSDVSR_M                                          0x000000FF
#define SSI_CPSR_CPSDVSR_S                                                   0

//*****************************************************************************
//
// Register: SSI_O_IMSC
//
//*****************************************************************************
// Field:     [3] TXIM
//
// Transmit FIFO interrupt mask:
// A read returns the current mask for transmit FIFO interrupt. On a write of
// 1, the mask for transmit FIFO interrupt is set which means the interrupt
// state will be reflected in MIS.TXMIS. A write of 0 clears the mask which
// means MIS.TXMIS will not reflect the interrupt.
#define SSI_IMSC_TXIM                                               0x00000008
#define SSI_IMSC_TXIM_BITN                                                   3
#define SSI_IMSC_TXIM_M                                             0x00000008
#define SSI_IMSC_TXIM_S                                                      3

// Field:     [2] RXIM
//
// Receive FIFO interrupt mask:
// A read returns the current mask for receive FIFO interrupt. On a write of 1,
// the mask for receive FIFO interrupt is set which means the interrupt state
// will be reflected in MIS.RXMIS. A write of 0 clears the mask which means
// MIS.RXMIS will not reflect the interrupt.
#define SSI_IMSC_RXIM                                               0x00000004
#define SSI_IMSC_RXIM_BITN                                                   2
#define SSI_IMSC_RXIM_M                                             0x00000004
#define SSI_IMSC_RXIM_S                                                      2

// Field:     [1] RTIM
//
// Receive timeout interrupt mask:
// A read returns the current mask for receive timeout interrupt. On a write of
// 1, the mask for receive timeout interrupt is set which means the interrupt
// state will be reflected in MIS.RTMIS. A write of 0 clears the mask which
// means MIS.RTMIS will not reflect the interrupt.
#define SSI_IMSC_RTIM                                               0x00000002
#define SSI_IMSC_RTIM_BITN                                                   1
#define SSI_IMSC_RTIM_M                                             0x00000002
#define SSI_IMSC_RTIM_S                                                      1

// Field:     [0] RORIM
//
// Receive overrun interrupt mask:
// A read returns the current mask for receive overrun interrupt. On a write of
// 1, the mask for receive overrun interrupt is set which means the interrupt
// state will be reflected in MIS.RORMIS. A write of 0 clears the mask which
// means MIS.RORMIS will not reflect the interrupt.
#define SSI_IMSC_RORIM                                              0x00000001
#define SSI_IMSC_RORIM_BITN                                                  0
#define SSI_IMSC_RORIM_M                                            0x00000001
#define SSI_IMSC_RORIM_S                                                     0

//*****************************************************************************
//
// Register: SSI_O_RIS
//
//*****************************************************************************
// Field:     [3] TXRIS
//
// Raw transmit FIFO interrupt status:
// The transmit interrupt is asserted when there are four or fewer valid
// entries in the transmit FIFO. The transmit interrupt is not qualified with
// the SSI enable signal. Therefore one of the following ways can be used:
//  - data can be written to the transmit FIFO prior to enabling the SSI and
// the
// interrupts.
//  - SSI and interrupts can be enabled so that data can be written to the
// transmit FIFO by an interrupt service routine.
#define SSI_RIS_TXRIS                                               0x00000008
#define SSI_RIS_TXRIS_BITN                                                   3
#define SSI_RIS_TXRIS_M                                             0x00000008
#define SSI_RIS_TXRIS_S                                                      3

// Field:     [2] RXRIS
//
// Raw interrupt state of receive FIFO interrupt:
// The receive interrupt is asserted when there are four or more valid entries
// in the receive FIFO.
#define SSI_RIS_RXRIS                                               0x00000004
#define SSI_RIS_RXRIS_BITN                                                   2
#define SSI_RIS_RXRIS_M                                             0x00000004
#define SSI_RIS_RXRIS_S                                                      2

// Field:     [1] RTRIS
//
// Raw interrupt state of receive timeout interrupt:
// The receive timeout interrupt is asserted when the receive FIFO is not empty
// and SSI has remained idle for a fixed 32 bit period. This mechanism can be
// used to notify the user that data is still present in the receive FIFO and
// requires servicing. This interrupt is deasserted if the receive FIFO becomes
// empty by subsequent reads, or if new data is received on RXD.
// It can also be cleared by writing to ICR.RTIC.
#define SSI_RIS_RTRIS                                               0x00000002
#define SSI_RIS_RTRIS_BITN                                                   1
#define SSI_RIS_RTRIS_M                                             0x00000002
#define SSI_RIS_RTRIS_S                                                      1

// Field:     [0] RORRIS
//
// Raw interrupt state of receive overrun interrupt:
// The receive overrun interrupt is asserted when the FIFO is already full and
// an additional data frame is received, causing an overrun of the FIFO. Data
// is over-written in the
// receive shift register, but not the FIFO so the FIFO contents stay valid.
// It can also be cleared by writing to ICR.RORIC.
#define SSI_RIS_RORRIS                                              0x00000001
#define SSI_RIS_RORRIS_BITN                                                  0
#define SSI_RIS_RORRIS_M                                            0x00000001
#define SSI_RIS_RORRIS_S                                                     0

//*****************************************************************************
//
// Register: SSI_O_MIS
//
//*****************************************************************************
// Field:     [3] TXMIS
//
// Masked interrupt state of transmit FIFO interrupt:
// This field returns the masked interrupt state of transmit FIFO interrupt
// which is the AND product of raw interrupt state RIS.TXRIS and the mask
// setting IMSC.TXIM.
#define SSI_MIS_TXMIS                                               0x00000008
#define SSI_MIS_TXMIS_BITN                                                   3
#define SSI_MIS_TXMIS_M                                             0x00000008
#define SSI_MIS_TXMIS_S                                                      3

// Field:     [2] RXMIS
//
// Masked interrupt state of receive FIFO interrupt:
// This field returns the masked interrupt state of receive FIFO interrupt
// which is the AND product of raw interrupt state RIS.RXRIS and the mask
// setting IMSC.RXIM.
#define SSI_MIS_RXMIS                                               0x00000004
#define SSI_MIS_RXMIS_BITN                                                   2
#define SSI_MIS_RXMIS_M                                             0x00000004
#define SSI_MIS_RXMIS_S                                                      2

// Field:     [1] RTMIS
//
// Masked interrupt state of receive timeout interrupt:
// This field returns the masked interrupt state of receive timeout interrupt
// which is the AND product of raw interrupt state RIS.RTRIS and the mask
// setting IMSC.RTIM.
#define SSI_MIS_RTMIS                                               0x00000002
#define SSI_MIS_RTMIS_BITN                                                   1
#define SSI_MIS_RTMIS_M                                             0x00000002
#define SSI_MIS_RTMIS_S                                                      1

// Field:     [0] RORMIS
//
// Masked interrupt state of receive overrun interrupt:
// This field returns the masked interrupt state of receive overrun interrupt
// which is the AND product of raw interrupt state RIS.RORRIS and the mask
// setting IMSC.RORIM.
#define SSI_MIS_RORMIS                                              0x00000001
#define SSI_MIS_RORMIS_BITN                                                  0
#define SSI_MIS_RORMIS_M                                            0x00000001
#define SSI_MIS_RORMIS_S                                                     0

//*****************************************************************************
//
// Register: SSI_O_ICR
//
//*****************************************************************************
// Field:     [1] RTIC
//
// Clear the receive timeout interrupt:
// Writing 1 to this field clears the timeout interrupt (RIS.RTRIS). Writing 0
// has no effect.
#define SSI_ICR_RTIC                                                0x00000002
#define SSI_ICR_RTIC_BITN                                                    1
#define SSI_ICR_RTIC_M                                              0x00000002
#define SSI_ICR_RTIC_S                                                       1

// Field:     [0] RORIC
//
// Clear the receive overrun interrupt:
// Writing 1 to this field clears the overrun error interrupt (RIS.RORRIS).
// Writing 0 has no effect.
#define SSI_ICR_RORIC                                               0x00000001
#define SSI_ICR_RORIC_BITN                                                   0
#define SSI_ICR_RORIC_M                                             0x00000001
#define SSI_ICR_RORIC_S                                                      0

//*****************************************************************************
//
// Register: SSI_O_DMACR
//
//*****************************************************************************
// Field:     [1] TXDMAE
//
// Transmit DMA enable. If this bit is set to 1, DMA for the transmit FIFO is
// enabled.
#define SSI_DMACR_TXDMAE                                            0x00000002
#define SSI_DMACR_TXDMAE_BITN                                                1
#define SSI_DMACR_TXDMAE_M                                          0x00000002
#define SSI_DMACR_TXDMAE_S                                                   1

// Field:     [0] RXDMAE
//
// Receive DMA enable. If this bit is set to 1, DMA for the receive FIFO is
// enabled.
#define SSI_DMACR_RXDMAE                                            0x00000001
#define SSI_DMACR_RXDMAE_BITN                                                0
#define SSI_DMACR_RXDMAE_M                                          0x00000001
#define SSI_DMACR_RXDMAE_S                                                   0


#endif // __SSI__