/** * Provides prototypes for available shell commands * * Copyright (C) 2014 INRIA. * * This file is subject to the terms and conditions of the GNU Lesser * General Public License v2.1. See the file LICENSE in the top level * directory for more details. * * * * @ingroup shell_commands * @{ * @file shell_commands.c * @brief sets up the system shell command struct * @author Oliver Hahm * @author Zakaria Kasmi * @author Ludwig Ortmann * * @note $Id: shell_commands.c 3855 2013-09-05 12:54:57 kasmi $ * @} */ #include #include "shell_commands.h" extern void _reboot_handler(int argc, char **argv); #ifdef MODULE_CONFIG extern void _id_handler(int argc, char **argv); #endif #ifdef MODULE_LPC_COMMON extern void _heap_handler(int argc, char **argv); #endif #ifdef MODULE_PS extern void _ps_handler(int argc, char **argv); #endif #ifdef MODULE_RTC extern void _date_handler(int argc, char **argv); #endif #ifdef MODULE_SHT11 extern void _get_temperature_handler(int argc, char **argv); extern void _get_humidity_handler(int argc, char **argv); extern void _get_weather_handler(int argc, char **argv); extern void _set_offset_handler(int argc, char **argv); #endif #ifdef MODULE_ISL29020 extern void _get_isl29020_init_handler(int argc, char **argv); extern void _get_isl29020_read_handler(int argc, char **argv); #endif #ifdef MODULE_LPS331AP extern void _get_lps331ap_init_handler(int argc, char **argv); extern void _get_lps331ap_read_handler(int argc, char **argv); #endif #ifdef MODULE_L3G4200D extern void _get_l3g4200d_init_handler(int argc, char **argv); extern void _get_l3g4200d_read_handler(int argc, char **argv); #endif #ifdef MODULE_LSM303DLHC extern void _get_lsm303dlhc_init_handler(int argc, char **argv); extern void _get_lsm303dlhc_read_handler(int argc, char **argv); #endif #ifdef MODULE_LTC4150 extern void _get_current_handler(int argc, char **argv); extern void _reset_current_handler(int argc, char **argv); #endif #ifdef CPU_X86 extern void _x86_lspci(int argc, char **argv); #endif /* configure available commands for each transceiver device: */ #ifdef MODULE_TRANSCEIVER #ifdef DBG_IGNORE #define _TC_IGN #endif #if (defined(MODULE_CC110X_LEGACY) || defined(MODULE_CC2420) || defined(MODULE_AT86RF231) || defined(MODULE_NATIVENET)) #define _TC_ADDR #define _TC_CHAN #define _TC_MON #define _TC_SEND #endif #if (defined(MODULE_CC2420) || defined(MODULE_AT86RF231) || defined(MODULE_NATIVENET)) #define _TC_LONG_ADDR #define _TC_PAN #endif #else /* WITHOUT MODULE_TRANSCEIVER */ #ifdef MODULE_CC110X_LEGACY_CSMA extern void _cc110x_get_set_address_handler(int argc, char **argv); extern void _cc110x_get_set_channel_handler(int argc, char **argv); #endif #endif #ifdef MODULE_TRANSCEIVER #ifdef _TC_ADDR extern void _transceiver_get_set_address_handler(int argc, char **argv); #endif #ifdef _TC_LONG_ADDR extern void _transceiver_get_set_long_addr_handler(int argc, char **argv); #endif #ifdef _TC_CHAN extern void _transceiver_get_set_channel_handler(int argc, char **argv); #endif #ifdef _TC_SEND extern void _transceiver_send_handler(int argc, char **argv); #endif #ifdef _TC_MON extern void _transceiver_monitor_handler(int argc, char **argv); #endif #ifdef _TC_PAN extern void _transceiver_get_set_pan_handler(int argc, char **argv); #endif #ifdef _TC_IGN extern void _transceiver_set_ignore_handler(int argc, char **argv); #endif #endif #ifdef MODULE_NET_IF extern void _net_if_ifconfig(int argc, char **argv); #endif #ifdef MODULE_RPL extern void _rpl_route_handler(int argc, char **argv); #endif #ifdef MODULE_MCI extern void _get_sectorsize(int argc, char **argv); extern void _get_blocksize(int argc, char **argv); extern void _get_sectorcount(int argc, char **argv); extern void _read_sector(int argc, char **argv); extern void _read_bytes(int argc, char **argv); #endif #ifdef MODULE_RANDOM extern void _mersenne_init(int argc, char **argv); extern void _mersenne_get(int argc, char **argv); #endif const shell_command_t _shell_command_list[] = { {"reboot", "Reboot the node", _reboot_handler}, #ifdef MODULE_CONFIG {"id", "Gets or sets the node's id.", _id_handler}, #endif #ifdef MODULE_LPC_COMMON {"heap", "Shows the heap state for the LPC2387 on the command shell.", _heap_handler}, #endif #ifdef MODULE_PS {"ps", "Prints information about running threads.", _ps_handler}, #endif #ifdef MODULE_RTC {"date", "Gets or sets current date and time.", _date_handler}, #endif #ifdef MODULE_SHT11 {"temp", "Prints measured temperature.", _get_temperature_handler}, {"hum", "Prints measured humidity.", _get_humidity_handler}, {"weather", "Prints measured humidity and temperature.", _get_weather_handler}, {"offset", "Set temperature offset.", _set_offset_handler}, #endif #ifdef MODULE_ISL29020 {"isl29020_init", "Initializes the isl29020 sensor driver.", _get_isl29020_init_handler}, {"isl29020_read", "Prints data from the isl29020 sensor.", _get_isl29020_read_handler}, #endif #ifdef MODULE_LPS331AP {"lps331ap_init", "Initializes the lps331ap sensor driver.", _get_lps331ap_init_handler}, {"lps331ap_read", "Prints data from the lps331ap sensor.", _get_lps331ap_read_handler}, #endif #ifdef MODULE_L3G4200D {"l3g4200d_init", "Initializes the l3g4200d sensor driver.", _get_l3g4200d_init_handler}, {"l3g4200d_read", "Prints data from the l3g4200d sensor.", _get_l3g4200d_read_handler}, #endif #ifdef MODULE_LSM303DLHC {"lsm303dlhc_init", "Initializes the lsm303dlhc sensor driver.", _get_lsm303dlhc_init_handler}, {"lsm303dlhc_read", "Prints data from the lsm303dlhc sensor.", _get_lsm303dlhc_read_handler}, #endif #ifdef MODULE_LTC4150 {"cur", "Prints current and average power consumption.", _get_current_handler}, {"rstcur", "Resets coulomb counter.", _reset_current_handler}, #endif #ifdef MODULE_TRANSCEIVER #ifdef _TC_ADDR {"addr", "Gets or sets the address for the transceiver", _transceiver_get_set_address_handler}, #endif #ifdef _TC_LONG_ADDR {"eui64", "Gets or sets the EUI-64 for the transceiver", _transceiver_get_set_long_addr_handler}, #endif #ifdef _TC_CHAN {"chan", "Gets or sets the channel for the transceiver", _transceiver_get_set_channel_handler}, #endif #ifdef _TC_SEND {"txtsnd", "Sends a text message to a given node via the transceiver", _transceiver_send_handler}, #endif #ifdef _TC_PAN {"pan", "Gets or sets the pan id for the transceiver", _transceiver_get_set_pan_handler}, #endif #ifdef _TC_MON {"monitor", "Enables or disables address checking for the transceiver", _transceiver_monitor_handler}, #endif #ifdef _TC_IGN {"ign", "Ignore the address at the transceiver", _transceiver_set_ignore_handler}, #endif #else /* WITHOUT MODULE_TRANSCEIVER */ #ifdef MODULE_CC110X_LEGACY_CSMA {"addr", "Gets or sets the address for the CC1100 transceiver", _cc110x_get_set_address_handler}, {"chan", "Gets or sets the channel for the CC1100 transceiver", _cc110x_get_set_channel_handler}, #endif #endif #ifdef MODULE_NET_IF {"ifconfig", "Configures a network interface", _net_if_ifconfig}, #endif #ifdef MODULE_RPL {"route", "Shows the routing table", _rpl_route_handler}, #endif #ifdef MODULE_MCI {DISK_READ_SECTOR_CMD, "Reads the specified sector of inserted memory card", _read_sector}, {DISK_READ_BYTES_CMD, "Reads the specified bytes from inserted memory card", _read_bytes}, {DISK_GET_SECTOR_SIZE, "Get the sector size of inserted memory card", _get_sectorsize}, {DISK_GET_SECTOR_COUNT, "Get the sector count of inserted memory card", _get_sectorcount}, {DISK_GET_BLOCK_SIZE, "Get the block size of inserted memory card", _get_blocksize}, #endif #ifdef MODULE_RANDOM { "mersenne_init", "initializes the PRNG", _mersenne_init }, { "mersenne_get", "returns 32 bit of pseudo randomness", _mersenne_get }, #endif #ifdef CPU_X86 {"lspci", "Lists PCI devices", _x86_lspci}, #endif {NULL, NULL, NULL} };