/* * Copyright 2009 Freie Universitaet Berlin (FUB) * 2018 Otto-von-Guericke-Universität Magdeburg * * This file is subject to the terms and conditions of the GNU Lesser * General Public License v2.1. See the file LICENSE in the top level * directory for more details. */ /** * @ingroup drivers_sht1x * @{ * * @file * @brief Internal defines required by the SHT10/SHT11/SHT15 driver * * @author Marian Buschsieweke */ #ifndef SHT1X_DEFINES_H #define SHT1X_DEFINES_H #include #include #include #ifdef __cplusplus extern "C" { #endif /** * @name Possible values to pass as `ack` parameter to `write_byte` * @see write_byte * @{ */ #define SHT1X_NO_ACK (1) /**< don't ack read in `read_byte` */ #define SHT1X_ACK (0) /**< do acknowledge read in `read_byte` */ /** @} */ /** * @name Commands that can be sent to the SHT1X driver * @{ */ #define SHT1X_STATUS_REG_W (0x06) /**< will write to status register */ #define SHT1X_STATUS_REG_R (0x07) /**< will read from status register */ #define SHT1X_MEASURE_TEMP (0x03) /**< tell sensor to measure temperature */ #define SHT1X_MEASURE_HUM (0x05) /**< tell sensor to measure humidity */ #define SHT1X_RESET (0x1E) /**< reset the sensor */ /** @} */ /** * @name Timing parameters for the SHT10/SHT1X/SHT15 * @{ */ #define SHT1X_HALF_CLOCK (1) /**< Half clock length in µsec */ #define SHT1X_MEASURE_TIMEOUT (1000) /**< Timeout for the SHT1x to complete the measurement (in millisec) */ #define SHT1X_RESET_WAIT (11000) /**< Wait 11ms after soft reset */ /** @} */ #define SHT1X_CONF_MASK (0x07) /**< Bitmask to get writable bits of the status byte */ #define SHT1X_SAUL_RETRIES (3) /**< How often reading the sensor should be retried in case of communication failures */ #ifdef __cplusplus } #endif #endif /* SHT1X_DEFINES_H */ /** @} */