set CHIPNAME STM32F103C8Tx

# Enable debug when in low power modes
set ENABLE_LOW_POWER 1

# Stop Watchdog counters when halt
set STOP_WATCHDOG 1

# STlink Debug clock frequency
set CLOCK_FREQ 4000

# use hardware reset, connect under reset
# connect_assert_srst needed if low power mode application running (WFI...)
reset_config srst_only srst_nogate connect_assert_srst
set CONNECT_UNDER_RESET 1

# brutally overwriting detected flash size with 128KiB (OpenOCD > 0.10.0)
set FLASH_SIZE 0x20000

source [find target/stm32f1x.cfg]

$_TARGETNAME configure -rtos auto