Martine Lenders
ff8b7a92d4
tapsetup: fix output for no sub-interfaces with list command
...
To be correct YAML, an empty list must be signified as a `[]`
2020-09-25 12:21:58 +02:00
Francisco
ad9e35c445
Merge pull request #14436 from bergzand/pr/suit/ietf_v7
...
SUIT: Upgrade to draft-ietf-suit-manifest-09
2020-09-24 21:57:24 +02:00
401f8eb9bd
dist/tools/suit: Update suit tooling to IETF-v7 compliance
2020-09-24 21:15:13 +02:00
benpicco
baedd20e68
Merge pull request #14972 from maribu/riscv-none-elf
...
build system: use riscv-none-elf as triplet
2020-09-24 00:50:46 +02:00
Cenk Gündoğan
b09fd7c78d
Merge pull request #14947 from leandrolanzieri/pr/kconfig/add_empty_recipies_dependencies
...
tools/genconfig: add empty recipes in dependency file
2020-09-16 11:00:45 +02:00
Marian Buschsieweke
d9e495fe83
build system: use riscv-none-elf as triplet
...
Use riscv-none-elf instead of legacy riscv-none-embed as target triplet for
RISC-V development. However, if ricsv-none-elf is not present, try
riscv64-unknown-elf and riscv-none-embed instead. If the legacy riscv-none-embed
is used, a warning is printed.
2020-09-15 11:18:33 +02:00
Martine S. Lenders
5fea5fca65
tapsetup: FreeBSD/OSX: remove member TAPs of bridge explicitly
2020-09-08 13:50:45 +02:00
Martine S. Lenders
29684af116
tapsetup: add capability to add routes to bridge
2020-09-08 13:50:45 +02:00
Martine S. Lenders
dbeb783b13
tapsetup: add capability to add addresses to bridge
2020-09-08 13:50:44 +02:00
Martine S. Lenders
0abe581e3e
tapsetup: add capability to enable forwarding for bridge
2020-09-08 13:50:27 +02:00
Martine S. Lenders
a9722dda71
tapsetup: add capability to list bridges
2020-09-08 13:50:09 +02:00
Leandro Lanzieri
8c79c18ce0
tools/genconfig: generate empty recipes in dependency file
2020-09-04 10:39:37 +02:00
Martine S. Lenders
de36c400d4
tapsetup: make output easier to parse
...
Distinguish bridge creation from tap creation.
2020-09-02 11:05:13 +02:00
c83b78a567
Merge pull request #14762 from maribu/move_byteorder
...
core/byteorder: Moved to sys
2020-09-01 15:02:11 +02:00
Francisco
c11a06224c
Merge pull request #14856 from jhaand/master
...
Updated stlink makefile to use OpenOCD's single configuration file.
2020-09-01 09:03:53 +02:00
Jelle Haandrikman
f18d3f5663
dist/tools/openocd/stlink: handle new and old Openocd version
2020-08-31 17:34:25 +02:00
179cf1b8cd
Merge pull request #14882 from aabadie/pr/tools/tapsetup_typo
...
tools/tapsetup: fix typo in function name
2020-08-28 13:58:02 +02:00
15222cf5e9
tools/tapsetup: fix typo in function name
2020-08-28 13:33:27 +02:00
János Brodbeck
e9370a2b81
dist/tools/tapsetup: fix minor typo
2020-08-28 13:24:55 +02:00
Martine S. Lenders
4cc6963b12
compile_and_test_for_board.py: add optional JUnit XML support
2020-08-27 14:25:57 +02:00
Leandro Lanzieri
bbfca7e1ef
Merge pull request #14458 from miri64/vagrant/enh/freebsd
...
vagrant: add Vagrantfile to test native in FreeBSD
2020-08-25 16:32:05 +02:00
Martine S. Lenders
1d435de445
buildsystem_sanity_check: whitelist Vagrantfiles
...
Vagrantfiles are not part of our build-system so they should be ignored
by its sanity check.
2020-08-25 16:01:59 +02:00
Martine S. Lenders
f9e3c0f513
vagrant: add Vagrantfile to test native in FreeBSD
2020-08-25 16:00:59 +02:00
Francisco
d665546d6f
Merge pull request #14464 from benpicco/python3
...
Convert remaining Python2 users to Python3
2020-08-18 09:11:23 +02:00
Benjamin Valentin
a5043540f4
dist/tools/compile_test: use Python3
2020-08-16 20:00:54 +02:00
Benjamin Valentin
b8e2d14164
gen_esp32part.py: use Python3
2020-08-16 19:48:04 +02:00
Marian Buschsieweke
164d2ac8f2
core/byteoder: Moved to sys
...
The byteorder utilities are never used in `core`, but extensively in `sys`.
They seem to be better located in `sys`.
2020-08-14 16:28:59 +02:00
377d389ce9
Merge pull request #14609 from fjmolinas/pr_openwsn_bump
...
pkg/openwsn: bump version
2020-08-11 16:25:36 +02:00
Francisco Molina
aa1e7797b0
pkg/openwsn: bump version
...
With the new version some OpenWSN modules are optional:
- openwsn_cjoin (and therefore opewnsn_coap)
- openwsn_6lo_fragmentation
- openwsn_icmpv6echo
- openwsn_crypto
- openwsn_udp (optional but kept as default)
New optional modules have been added:
- openwsn_iee802154e_security (link layer security)
- openwsn_adaptive_msf (MSF dynamic slot allocation)
Openvisualizer needs to be updated to be compatible with the new
version.
2020-08-11 15:24:33 +02:00
Cenk Gündoğan
964413c34a
ci: changed_files: ignore fixdep.c for cppcheck
2020-08-11 09:47:32 +02:00
Cenk Gündoğan
4fac8800bd
tools: whitespacecheck: ignore fixdep.c
2020-08-11 09:47:32 +02:00
Cenk Gündoğan
f49eb4305c
dist: tools: import fixdep from linux
2020-08-10 12:17:59 +02:00
Leandro Lanzieri
9c10580ba4
dist/tools/kconfiglib: introduce own genconfig.py tool
...
This tool unifies multiple functionalities needed by the Kconfig
integration into one tool.
2020-08-07 18:17:37 +02:00
26c915dcb3
tools: print_toolchain_versions.sh: update to msp430-elf
2020-08-05 14:29:07 +02:00
Cenk Gündoğan
f4e631ffdb
tools: whitespacecheck: use ignore file to easily add expressions
2020-08-04 13:19:26 +02:00
Benjamin Valentin
6ac24d1a95
tools/usb-cdc-ecm/start_network.sh: remove parameters to read
...
The `read` implementation on my system doesn't know a `-n` parameter:
tools/usb-cdc-ecm/start_network.sh: 100: read: Illegal option -n
As the command is only used to block if no terminal is started, we can
as well remove them.
2020-08-02 15:04:02 +02:00
b7f2ad8d76
ci/build_system_check: improve check for features provided in Makefile.features
...
- Take into account potential spaces at the beginning of a line
- Check all Makefile.<something> files, not only the ones in boards and cpus
2020-07-20 13:06:05 +02:00
benpicco
4fb1e17508
Merge pull request #14454 from trickeydan/usb-cdc-ecm-example
...
Add USB Ethernet support to GNRC Border Router example
2020-07-18 15:58:44 +02:00
Dan Trickey
2c3987def0
examples/gnrc_border_router: add CDC-ECM uplink
...
Optionally executes pyterm from CDC-ECM start_network.sh
The shell script exits and cleans up instantly unless there is a
blocking program running at the end. Users can supply a serial port to
display in pyterm, or alternatively just wait if it is a "headless"
deployment.
2020-07-17 21:34:56 +01:00
ce36767972
tools/setsid: cleanup and allow Makefile to be used standalone
2020-07-10 13:30:46 +02:00
5dd5c7913f
tools/pic32prog: cleanup and allow Makefile to be used standalone
2020-07-10 13:30:46 +02:00
7d5f08babf
tools/edbg: allow Makefile to be called stand-alone
...
Also:
- refactor the Makefile so all is not called if edbg is already there
- add a clean target to only remove the edbg binary
2020-07-10 13:30:38 +02:00
7e6b506ee6
tools/bossa: allow Makefile to be called stand-alone
2020-07-10 13:30:37 +02:00
09dbfd88be
dist/tools/bossa*: use common build Makefile
2020-07-10 11:56:11 +02:00
Martine Lenders
37a5e8700f
Merge pull request #14459 from miri64/tools/enh/make-env
...
tools: add capability to provide make command via environment
2020-07-09 12:20:09 +02:00
Benjamin Valentin
12cf6f0137
buildsystem_sanity_check: use python3
2020-07-08 14:57:54 +02:00
Benjamin Valentin
830bd34662
pyterm: use Python3 in setup.py
2020-07-08 14:57:14 +02:00
Leandro Lanzieri
f6b6072398
dist/tools/kconfiglib: Use python3 for RIOT adaption of menuconfig
2020-07-08 14:40:06 +02:00
Martine S. Lenders
da3fdd33d1
tools: add capability to provide make command via environment
...
Not all operating systems name the GNU Make `make`. FreeBSD e.g. uses a
different dialect of Make, that seems to be incompatible with GNU make.
(I wasn't able to get `make` run, but `gmake` works).
This allows our test scripts to be configured via the environment
variable `MAKE` to point to a different make command.
2020-07-08 09:36:36 +02:00
Martine S. Lenders
da7d5f7a49
tapsetup: fix for FreeBSD
2020-07-07 20:20:37 +02:00
dfa9979615
tools/backport_pr: add doctest for _get_latest_release function
2020-07-04 18:25:36 +02:00
4b6ab1e583
tools/backport_pr: fix warning/issues reported by pylint and flake8
2020-07-04 18:25:36 +02:00
09c7b54704
tools/backport_pr: relax pylint and flake8 checks
...
- ignore fixme warning with pylint
- increase tolerated code complexity for flake8
2020-07-04 18:25:36 +02:00
Cenk Gündoğan
7aa499d5f1
make: use $(MAKE) instead of direct make call
2020-07-03 12:03:06 +02:00
benpicco
adc0a3cb8c
Merge pull request #13668 from benpicco/tools/radvd
...
tools/radvd: Add script to run radvd on a tun interface
2020-07-01 16:06:24 +02:00
Leandro Lanzieri
b2c0a8e67d
Merge pull request #14401 from benpicco/kconfiglib-v14.1.0
...
kconfiglib: bump to v14.1.0
2020-07-01 09:37:50 +02:00
Francisco
41888674a4
Merge pull request #14385 from aabadie/pr/make/appdeps_export
...
boards/mips: remove use of APPDEPS, un-export globally APPDEPS
2020-07-01 09:13:35 +02:00
Benjamin Valentin
6dcaa9ad49
tools/radvd: Add script to run radvd on a tun interface
...
This adds a small wrapper script to configure and start radvd on a
tun interface.
This allows the use of router advertisements and global adresses with
the `native` target.
Usage:
- first create the tap interface as usual
sudo dist/tools/tapsetup/tapsetup
- now run radvd on the new tapbr0 interface
sudo dist/tools/radvd/radvd.sh -c tapbr0 2001:db8::/64
- Now run the `gnrc_networking` example on native:
make -C examples/gnrc_networking all term
You should now see that the `native` node has received a global address
in `ifconfig`.
You should be able to reach this address from your host computer.
It may take very long for the native node to obtain the address.
If you are observing this, try turning off router advertisements of the
native node on the upstream interface by running
ifconfig 6 -rtr_adv
Alternatively change `USEMODULE += gnrc_ipv6_router_default` to
`USEMODULE += gnrc_ipv6_default` in the project's `Makefile`.
2020-06-30 17:55:25 +02:00
Benjamin Valentin
11fa839abb
kconfiglib: bump to v14.1.0
...
The latest upstream version uses Python3 instead of Python2.
2020-06-30 17:32:42 +02:00
d98ddfad9a
Merge pull request #13824 from fjmolinas/pr_openwsn
...
pkg/openwsn: re-integrate the network stack as a package
2020-06-30 14:08:10 +02:00
Francisco Molina
d01476a661
dist/tools/openvisualizer: inital support
2020-06-30 13:10:56 +02:00
Benjamin Valentin
09c3ad5999
esptool.py: use Python3
2020-06-29 23:35:37 +02:00
88452abfcf
ci/build_system_check: ensure no export of APPDEPS/BUILDDEPS/DEBUGDEPS
2020-06-28 12:15:18 +02:00
86fb4a5685
tools/flatc: don't clone flatbuffers in the global pkg dir
...
When building with make -j, flatbuffers is cloned by both the flatc build and the regular package build and from time to time a concurrency issue make the build to fail. Keeping regular flatbuffer package and flatc tool sources separate avoid this issue
2020-06-28 11:16:12 +02:00
a0b042cdd4
dist/tools: adapt tools that are built using pkg.mk
2020-06-26 09:25:45 +02:00
Francisco Molina
9909cdfffd
dist/buildsystem_sanity_check: no USEMODULE in Makefile.include
2020-06-25 11:02:00 +02:00
e785d43003
ci/build_system_check: fix typo in function name
2020-06-25 10:15:23 +02:00
Francisco
a665fcc542
Merge pull request #14123 from jue89/fix/ztimer_pseudomodules
...
ztimer: relocate PSEUDOMODULES definitions
2020-06-24 22:56:07 +02:00
c36109516a
dist/buildsystem_check: ensure no export of toolchains vars
2020-06-24 11:01:01 +02:00
d69036f08d
dist/tools/git-cache: don't export GIT_CACHE_DIR in script
2020-06-23 14:54:25 +02:00
1084d6593f
dist/buildsystem_check: ensure no export of GITCACHE/GIT_CACHE_DIR
2020-06-23 14:54:25 +02:00
d0f966734a
dist/tools: remove unneccessary redefinition of GITCACHE
2020-06-23 14:54:25 +02:00
Leandro Lanzieri
d90140e121
Merge pull request #13221 from miri64/tools/feat/pktbuf-parser
...
dist/tools: provide tool to parse `pktbuf` output
2020-06-23 13:50:36 +02:00
Martine S. Lenders
697f16eab7
dist/tools: provide tool to parse pktbuf output
2020-06-23 11:12:33 +02:00
3332f7d643
dist/tools/flatc: configure cmake for out-of-source build
2020-06-19 14:23:49 +02:00
Francisco
315b97939f
Merge pull request #14246 from leandrolanzieri/pr/cpu_arch_to_cpu_core
...
cpu: Rename CPU_ARCH to CPU_CORE
2020-06-16 13:48:08 +02:00
Leandro Lanzieri
4d65bc8e0a
cpu: Rename CPU_ARCH to CPU_CORE
2020-06-16 12:05:40 +02:00
be5db69ea9
dist/tools/mosquitto_rsmb: fix stand-alone build
2020-06-15 09:53:46 +02:00
1ed0d659ed
Merge pull request #13320 from bergzand/pr/stdio/semihosting
...
stdio_semihosting: Initial include of Semihosting-based STDIO
2020-06-09 16:52:44 +02:00
aff18b9599
tools/openocd: add OPENOCD_DBG_EXTRA_CMD
2020-06-09 10:14:57 +02:00
Leandro Lanzieri
5ba7ef6d6f
dist/tools/kconfiglib: Add remove command to delete files
...
The 'remove' target removes the downloaded files from the tool.
2020-06-04 15:31:40 +02:00
0e1e0a5b6a
dist/tools/flatc: compile with ccache (if CCACHE is set)
2020-06-02 21:42:27 +02:00
Leandro Lanzieri
1783a56767
buildsystem_check: Add check for features provided
...
This checks that providing features for boards and CPUs is only being
done in Makefile.features.
2020-05-29 11:07:09 +02:00
Juergen Fitschen
0a4beec345
buildsystem_sanity_check: don't touch PSEUDOMODULES in Makefile.dep
2020-05-23 16:35:05 +02:00
eb9bf4b601
dist/tools/uncrustify: add ztimer files to whitelist
2020-05-07 14:59:13 +02:00
87b0c1d909
dist/tools/uncrustify: temporarily disable error on check failure
2020-05-07 13:57:09 +02:00
fda6ef6ac6
dist/tools/uncrustify/uncrustify.sh: fix uncrustify check logic
...
Previously, uncrustify.sh would fail (report uncrustifying necessary) if
there was any output of uncrustify. Turns out uncrustify sometimes
outputs something.
This commit changes the logic to use uncrustify's output value as
indicator.
Also, adds printing which file causes the check to fail.
2020-04-29 09:51:36 +02:00
e531bdbcec
Merge pull request #8519 from jia200x/uncrustify
...
uncrustify: add auto uncrustify with blacklist
2020-04-29 09:16:27 +02:00
Jose Alamos
bb7c7a7496
uncrustify: add core to whitelist
2020-04-28 12:35:26 +02:00
Jose Alamos
bf1e2431ac
ci/static_tests: call uncrustify check
2020-04-28 12:35:25 +02:00
Jose Alamos
9f1b2f2550
uncrustify: add CI check
...
Co-authored-by: Kaspar Schleiser <kaspar@schleiser.de>
2020-04-28 12:35:25 +02:00
Leandro Lanzieri
8023aa3d47
dist/tools/kconfiglib: Add riot_kconfig to override default behaviours
...
This also patches menuconfig.py to use the new class. For now it
implements a version of _parse_help which removes Doxygen markers.
2020-04-27 12:29:40 +02:00
Martine Lenders
55a7010a0a
Merge pull request #13157 from nmeum/pr/fuzzing_tcp_only
...
Add AFL-based fuzzing setup for network modules
2020-04-18 10:54:14 +02:00
Sören Tempel
24468bead6
fuzzing: Initialize
...
This adds a new subdirectory called `fuzzing/` which will contain
applications for fuzzing various RIOT network modules in the future.
This subdirectory is heavily inspired by the `examples/` subdirectory.
The fuzzing applications use AFL as a fuzzer. Each application contains
Makefiles, source code, and an input corpus used by AFL to generate
input for fuzzing.
2020-04-17 17:11:15 +02:00
Benjamin Valentin
0943f867db
dist/tools: add sliptty to host-tools
2020-04-16 23:59:31 +02:00
benpicco
ecd266f3d3
Merge pull request #13801 from miri64/tools/fix/start_network-interface-init
...
dist/tools/*/start_network.sh: ensure TUN/TAP interface
2020-04-08 12:51:03 +02:00
1aa6ce901e
dist/tools: add bossa version for nrf52
2020-04-08 09:58:21 +02:00
Benjamin Valentin
079aea8775
sliptty/start_network.sh: fix with DHCPv6
...
The `start_network.sh` script creates a `${TUN}` interface, so
the `${TAP}` variable will always be empty.
This means start_dhcpd() will always fail as the DHCPv6 script is lacking
an interface.
2020-04-07 21:15:07 +02:00
Benjamin Valentin
0e4fa19bda
sliptty/start_network.sh: don't default to DHCPv6
...
DHCPv6 is enabled by the `-d` option.
It should not be enabled in absence of this option.
2020-04-07 20:12:53 +02:00
Leandro Lanzieri
d60295db3c
Merge pull request #13720 from aabadie/pr/native_no_export
...
native: only export NATIVEINCLUDES in vars.inc.mk
2020-04-07 12:55:45 +02:00
010aca2638
Merge pull request #13719 from aabadie/pr/boards/flash_export_remove
...
boards*: remove remaining uses of export with some openocd related variables
2020-04-07 11:58:28 +02:00
benpicco
f6eacda9f8
Merge pull request #13609 from miri64/dhcpv6-pd_ia/feat/initial
...
dhcpv6-pd_ia: initial import of a DHCPv6 server bootstrapper
2020-04-03 20:40:38 +02:00
Martine S. Lenders
0c51285b9b
dist/tools: provide DHCPv6 server support for network setup scripts
2020-04-03 17:47:39 +02:00
Martine S. Lenders
e6510cb89e
dhcpv6-pd_ia: initial import of a DHCPv6 server bootstrapper
2020-04-03 17:32:51 +02:00
Martine S. Lenders
d726af2cac
dist/tools/*/start_network.sh: ensure TUN/TAP interface
...
Previously, when the creation of the TUN/TAP interface failed in one of
the `start_network.sh` scripts, the script will fail with a cryptic
error like
> dist/tools/ethos/start_network.sh: 68: [: -eq: unexpected operator
This fix ensures, that the value of this variable checked is always set
such that in the error case, `ethos`/`sliptty` won't start.
2020-04-03 13:39:09 +02:00
Martine S. Lenders
e731397bae
dist/tools/tapsetup: fix deletion when UPLINK unset
2020-03-31 18:58:55 +02:00
Jose Alamos
e451570219
gnrc_netif: remove GNRC_NETIF_NUMOF macro
2020-03-26 11:12:23 +01:00
27811518a0
ci/buildsystem: ensure NATIVEINCLUDES is only exported in vars
2020-03-26 10:26:14 +01:00
405c0cfef5
makefiles/openocd: export OPENOCD_CMD_RESET_RUN only when required
2020-03-26 10:00:37 +01:00
0e86aae445
ci/buildsystem: ensure PRE_FLASH_CHECK_SCRIPT is not exported
2020-03-26 09:37:41 +01:00
08adbb283c
ci/buildsystem: ensure OPENOCD_PRE_FLASH_CMDS is not exported
2020-03-26 09:31:22 +01:00
4aa351c746
ci/buildsystem: ensure OPENOCD_PRE_VERIFY_CMDS is not exported
2020-03-26 09:31:21 +01:00
Thomas Stilwell
41ffaed583
dist/tools/ethos: fix typo for compiling baud rate 230400
2020-03-23 16:01:00 +01:00
7d0c475113
Merge pull request #13486 from bergzand/pr/suit/ietf_v3
...
SUIT: Update to draft-ietf-v3
2020-03-20 14:44:29 +01:00
Benjamin Valentin
ac3e996252
tapsetup: provide --uplink option
...
Add an --uplink option to tapsetup to bridge the tap-network with an
IPv6 enabled uplink interface, providing IPv6-WAN connectivity to native.
2020-03-20 14:12:43 +01:00
829f5920f0
flake8: move exception from SUITv4 to SUITv3
...
Co-authored-by: Kaspar Schleiser <kaspar@schleiser.de>
2020-03-19 22:56:01 +01:00
009a317b14
dist/tools/suit_v3: Add ietf-v3 manifest generator
...
Co-authored-by: Kaspar Schleiser <kaspar@schleiser.de>
2020-03-18 14:13:12 +01:00
8814e60fd4
Merge pull request #10482 from miri64/pyterm/enh/try-reconnect-on-error
...
pyterm: try to reconnect on SerialException during connect
2020-03-18 11:23:22 +01:00
Martine Lenders
34788abedf
Merge pull request #13618 from janosbrodbeck/pr/sliptty_shift_fix
...
sliptty/start_network.sh: fix if no argument is given
2020-03-11 19:07:27 +01:00
János Brodbeck
4cf4ac124f
sliptty/start_network.sh: fix if no argument is given
...
fix for 'shift: can't shift that many'
2020-03-11 16:47:00 +01:00
1e8037670b
Merge pull request #10420 from gschorcht/drivers_apds99xx
...
drivers: add driver for APDS99XX ambient light and proximity sensors
2020-03-11 16:27:53 +01:00
Martine Lenders
1aeae204c3
pyterm: return errno on OSError
2020-03-11 14:55:05 +01:00
Martine Lenders
7a9010fefa
pyterm: try to reconnect on SerialException during connect
...
This is what the user would do anyway.
2020-03-11 14:55:04 +01:00
Gunar Schorcht
bd3ccc4697
tools/codespell: ignore ALS (Ambient Light Sensing)
2020-03-11 14:21:47 +01:00
benpicco
d294e1d01c
Merge pull request #9572 from maribu/atmega-debug
...
On-Chip Debugging for AVR/ATmega based boards
2020-03-11 11:40:40 +01:00
Marian Buschsieweke
fa189c4c1d
dist/tools/avarice: Detect GDB automatically
...
While some users likely still use avr-gdb, more and more systems are starting
to use gdb-multiarch. In order to work in both cases, the script now just
checks which version is installed. (If both are installed, gdb-multiarch is
preferred.)
2020-03-11 10:51:40 +01:00
ad5b9d7faf
ci/buildsystem_check: force no export of JLINK_PRE_FLASH
2020-03-10 16:31:50 +01:00
5e85994abf
ci/buildsystem_check: force no export of JLINK_RESET_FILE
2020-03-10 16:30:57 +01:00
c586db5ae2
ci/buildsystem_check: ensure JLINK_IF is not exported
2020-03-10 16:29:20 +01:00
9c2e5c9b7c
ci/buildsystem_check: ensure JLINK_DEVICE is not exported
2020-03-10 16:28:26 +01:00
Marian Buschsieweke
edd93411fe
dist: De-duplicated AVR debug config & scripts
...
Use common debug.sh, debug_srv.sh and gdb.conf for all AVR boards.
2020-03-10 12:54:51 +01:00
980e06bcd6
ci/buildssytem: ensure PYOCD_ADAPTER_INIT is not exported
2020-03-08 15:12:44 +01:00
c27870face
ci/buildssytem: ensure FLASH_TARGET_TYPE is not exported
2020-03-08 15:12:44 +01:00
benpicco
2cc3d386fd
Merge pull request #13572 from miri64/sliptty/enh/global-addr
...
sliptty/start_network.sh: configure global address for SLIP interface
2020-03-08 15:04:45 +01:00
Martine S. Lenders
d43ff6df12
sliptty/start_network.sh: configure global address for SLIP interface
...
This way hosts without pre-configured IPv6 addresses can also reach
global addresses within a downstream network.
2020-03-06 11:45:05 +01:00
Martine S. Lenders
45ef9f9fe7
sliptty/start_network.sh: do not provide sliptty with -e argument
2020-03-06 11:44:42 +01:00
Martine S. Lenders
20ce69c361
sliptty/start_network.sh: add missing argument to usage
2020-03-06 11:39:37 +01:00
Benjamin Valentin
ed4d871835
dist/tools/cc2538-bsl: use upstream version
...
Automatically fetch the upstream version of cc2538-bsl.py instead
of maintaining our own fork of the tool.
fixes #13566
2020-03-06 11:13:21 +01:00
benpicco
0b1dce36ac
Merge pull request #10477 from miri64/sliptty/feat/initial
...
sliptty: introduce a new SLIP to TUN tool
2020-03-05 18:08:40 +01:00
Martine Lenders
917ba19b35
sliptty: introduce a new SLIP to TUN tool
2020-03-05 15:55:10 +01:00
Karl Fessel
563f4f6d9d
tools/backport_pr: Add Token Scope check
2020-03-04 14:30:12 +01:00
Kevin "Tristate Tom" Weiss
21395f0396
Merge pull request #13514 from benpicco/cc2538-bsl-fix
...
cc2538-bsl.py: fix ERROR: string argument without an encoding
2020-03-04 09:53:13 +01:00
ca3c256e49
Merge pull request #13430 from kaspar030/split_static_tests
...
dist: factor out static tests from build_and_test.sh
2020-03-03 18:41:25 +01:00
95d607b54d
Merge pull request #13480 from aabadie/pr/tools/openocd_export_variables
...
tools/openocd: export configuration variables only to required targets
2020-03-03 18:16:05 +01:00
f7bb189d3e
dist/tools/ci/static_tests.sh: tag base branch for Murdock
2020-03-03 14:38:13 +01:00
294b999d34
dist/tools/ci/static_tests.sh: fix shellcheck errors
2020-03-03 14:38:13 +01:00
a9768151dd
ci/buildssytem: ensure APPDEPS not exported
2020-03-03 14:19:55 +01:00
b27ae335af
ci/buildsystem_check: ensure OPENOCD_ADAPTER_INIT is not exported
2020-03-03 11:42:20 +01:00
39733a5c30
ci/buildsystem_check: ensure OPENOCD_RESET... is not exported
2020-03-03 11:42:19 +01:00
Benjamin Valentin
ffc28c4b0f
cc2538-bsl.py: fix python3 error
...
Fix the
ERROR: string argument without an encoding
error that would appear without `python3-magic` library installed.
2020-02-29 02:24:43 +01:00
Francisco
5af4c5a9c5
Merge pull request #13470 from kfessel/fix13179
...
boards/nucleo-f767zi: Fix13179 make nucleo-f767zi debuggable again
2020-02-28 17:42:10 +01:00
Karl Fessel
f00f1254ec
tools/openocd: Fix Flash probing for nucleo-f747zi
2020-02-28 13:53:20 +01:00
Karl Fessel
979b4d5cf7
Revert "boards/nucleo-f767zi: add correct flash bank openocd config"
...
This reverts commits:
- 1dec5ba61b53f60db66f
2020-02-28 13:51:58 +01:00
Benjamin Valentin
541265ee79
cc2538-bsl.py: use python3
...
support for python2 has ended and the script works just as well
with python3.
2020-02-27 14:17:37 +01:00
ef8daaf7be
suit: remove moran-v4 version of the parser
...
Co-authored-by: Kaspar Schleiser <kaspar@schleiser.de>
2020-02-26 14:54:16 +01:00
Martine S. Lenders
21807d40a5
start_networking.sh: add capability to not start uhcpd
...
As we now also support DHCPv6 we might want to use the setup-routine of
start_networking.sh but not start the UHCP server.
2020-02-26 12:40:03 +01:00
09538c5a75
dist: split out static tests from build_and_test.sh
2020-02-26 12:36:50 +01:00
f451eb692c
Merge pull request #13452 from aabadie/pr/tools/openocd_config_export
...
tools/openocd: only export OPENOCD_CONFIG to required targets
2020-02-25 15:11:38 +01:00
785052e410
Merge pull request #13468 from aabadie/pr/tools/bossa_rework
...
tools/bossa: split between 1.8 and 1.9 versions
2020-02-25 13:32:38 +01:00
d5e13fe4fa
dist/tools/bossa-1.9: add version 1.9.1
2020-02-25 11:49:10 +01:00
e16a9753d9
dist/tools/bossa: move to bossa-1.8 directory
2020-02-25 11:47:32 +01:00
e119bf6681
Merge pull request #13080 from aabadie/pr/make/remove_useless_exports_all
...
make: even more useless exports removed
2020-02-25 11:30:03 +01:00
fadd361a67
Merge pull request #12574 from aabadie/pr/tools/codespell_ignore_list
...
tools/codespell: improve ignored words list + enable colored output
2020-02-25 11:09:41 +01:00
dca7d96148
ci/buildsystem_sanity: ensure TARGET_ARCH no export
2020-02-25 09:42:12 +01:00
2e7202ef2e
ci/buildsystem_sanity: ensure UNDEF not exported
2020-02-25 09:40:34 +01:00
benpicco
4671fd2fe4
Merge pull request #10475 from chrysn-pull-requests/openocd-for-stk3700
...
boards/any silabs: Allow selecting OpenOCD
2020-02-24 19:12:43 +01:00
99d1404d2f
ci/buildsystem_check: ensure OPENOCD_CONFIG is not exported
2020-02-24 10:04:12 +01:00
bd081cd980
tools/openocd: remove default OPENOCD_CONFIG value
...
The default value is already set in openocd.inc.mk
2020-02-24 10:04:11 +01:00
Gunar Schorcht
b132698cd5
cpu/esp*: move parition table tool to dist/tools/esptool
...
The same tool 'gen_esp32part.py' is used for the generation of partition tables on ESP8266 as well as n ESP32. The tool is therefore added to 'dist/tools/esptool'
2020-02-21 09:09:08 +01:00
562cc9007c
tools/packer: adapt for Ubuntu 18.04
...
This change is also a complete refactoring of the generation of the vagrant image
2020-02-19 19:23:07 +01:00
Jose Alamos
eaf2fecd20
vera++: remove non-zero exit code
2020-02-18 19:53:08 +01:00
Sebastian Meiling
2aaf811d84
Merge pull request #9778 from jia200x/pr/vera++
...
style-check/vera++: add style validator and scripts
2020-02-18 10:04:38 +01:00
Jose Alamos
d0b13281d8
ci: invoke vera++ from CI
2020-02-14 14:17:17 +01:00
Jose Alamos
c455efba36
vera++: add README file
2020-02-14 14:17:17 +01:00
Jose Alamos
6057d1fba9
vera++: add check.sh script
2020-02-14 14:17:17 +01:00
Jose Alamos
6352c3cf48
style-check/vera++: add RIOT vera++ files
2020-02-14 14:17:16 +01:00
chrysn
1dbf07f926
openocd: Add instructions for overriding OPENOCD
2020-02-14 09:42:20 +01:00
chrysn
ac8ed1eb13
openocd: Allow using OpenOCD-shipped configs
...
OpenOCD already ships config files for the EFM32 and EFR32 family, no
need to duplicate them in RIOT; this removes the "file exists" check for
files that are clearly OpenOCD-shipped board configurations, as the
script can't (and shouldn't) know OpenOCD's include paths.
2020-02-14 09:24:25 +01:00
077bf8aa73
tools/toolchain_version: remove extra underlying -
2020-02-13 10:54:42 +01:00
acf3ea0636
tools/codespell: enable colored output
2020-02-12 11:22:22 +01:00
19fb4bbcb7
tools/codespell: use file for setting ignored words
2020-02-12 11:22:22 +01:00
ab9c67e621
Merge pull request #13257 from fjmolinas/pr_creating_boards_md
...
doc/doxygen: add creating boards doc
2020-02-12 08:40:53 +01:00
f1799b9910
dist/tools/codespell: add interactive mode
2020-02-11 13:23:47 +01:00
Francisco Molina
e86a5d43ed
dist/tools/buildsystem_sanity_check: exclude .md files
...
Exclude .md files from check_cpu_cpu_model_defined_in_makefile_features
2020-02-05 14:25:40 +01:00
5d5cee0fa5
ci/buildsystem_sanity: ensure not export USEMODULE_INCLUDES
2020-02-05 10:27:58 +01:00
ad234d1f38
ci/buildsystem_sanity_check: ensure USEMODULE is not exported
2020-02-05 10:27:58 +01:00
Benjamin Valentin
baea542532
tools/edbg: update to latest upstream version
...
This version has changed the target names, so add a edbg-devices.inc.mk
to automatically select the right target.
2020-01-31 09:35:27 +01:00
98995f685b
Merge pull request #13179 from fjmolinas/pr_openocd_stm32f7_probe
...
boards/nucleo-f767zi: add correct flash bank openocd config
2020-01-28 10:48:23 +01:00
Francisco Molina
53f60db66f
dist/tools/openocd/openocd.sh: add FLASH_BANK
...
Allow specifying index of `flash bank` to read configuration from
in cases where the configuration provided in openocd is incorrect.
This is the case for the majority of stm32 boards where it relies
on `flash probe` to get the correct value.
2020-01-27 22:32:00 +01:00
8509e1e213
Merge pull request #13119 from nmeum/pr/ssp_random_canary
...
sys/spp: randomize canary value on each build
2020-01-20 20:56:16 +01:00
Sören Tempel
1e52ac21e4
tools: add tool for generating random hexadecimal values
...
This tool generates a random hexadecimal value of a given maximum size.
This is useful for generating random canary values during compile-time
for the ssp module which currently uses a constant value.
2020-01-20 14:51:26 +01:00
benpicco
8a99824e66
Merge pull request #11095 from benpicco/pyterm_sleep
...
pyterm: add /sleep function
2020-01-15 18:25:29 +01:00
Leandro Lanzieri
50f1b1423a
Merge pull request #12999 from fjmolinas/pr_native_makefile_include_explicit_path
...
boards: use explicit paths for file inclusion
2020-01-13 16:00:48 +01:00
Francisco Molina
6a0eaec82f
dist/tools/buildsystem_sanity_check: check \ not in boards/
2020-01-13 12:43:36 +01:00
9de6047097
dist/tools: add support for flatc compiler
2020-01-13 09:41:22 +01:00
Francisco Molina
d2c99989dc
dist/tools/riotboot_gen_hdr/genhdr: use unsigned long
2020-01-10 12:56:07 +01:00
Gaëtan Harter
f08116f3ce
dist/tools/*: adapt to new state file targets
...
Prepare for handling pkg state with files. So it requires having the
path defined before declaring targets. In addition, it cleans up the
old git-download target.
2020-01-08 20:55:19 +01:00
ff285cb3e0
Merge pull request #13042 from fjmolinas/pr_compile_and_test_args
...
dist/tools/compile_and_test_for_board: pass parser as main arg
2020-01-08 09:01:14 +01:00
Francisco Molina
413f401b97
dist/tools/compile_and_test_for_board: pass parser as main arg
2020-01-08 08:32:42 +01:00
Juan Carrano
02b72ab385
print_toolchain_versions: print system and make's default shell.
...
Some systems use dash as system shell, others use bash. The shell used
by make can also be different, and unrelated to the system shell.
Differences in this variable can cause problems when testing PRs and
reporting bugs.
The default shell is important system information that should be reported.
2020-01-07 09:28:46 +01:00
Francisco
2729580cf1
Merge pull request #13027 from gschorcht/dist/tools/esp8266_version_check
...
dist/tools/ci: print toolchain version update for esp8266
2020-01-06 17:31:00 +01:00
Gunar Schorcht
0252af6572
dist/tools/ci: print toolchain version update for esp8266
...
The new ESP8266 port in PR #11108 requires a different tool chain than the previous implementation. The version check must be updated accordingly.
2020-01-04 17:23:28 +01:00
Francisco
f6f4469542
Merge pull request #11889 from miri64/tapsetup/enh/sudo
...
tapsetup: require to be executed with sudo
2020-01-04 10:43:06 +01:00
Martine S. Lenders
08b11d424d
tapsetup: require to be executed with sudo
2020-01-03 21:00:54 +01:00
970008a74c
ci/build_system_sanity_check: check LINKFLAGS not exported
2020-01-03 16:07:15 +01:00
ac33697af7
tools/compile_test_board: allow use of wildcards for applications
2019-12-19 15:58:47 +01:00
Dylan Laduranty
bd7f105428
Merge pull request #12978 from smlng/pr_freebsd_osprint
...
tools: correctly detect and print FreeBSD OS
2019-12-18 14:56:57 +01:00
Sebastian Meiling
c185307025
tools: correctly detect and print FreeBSD OS
...
Currently the `print_toolchain_versions` script only supports Linux
and Apple macOS when printing OS name and version. This adds support
for FreeBSD.
2019-12-18 10:25:29 +01:00
Sebastian Meiling
5eee821f6e
makefiles: move exports to vars.inc.mk
2019-12-18 10:07:50 +01:00
211cec8b3e
tools/buildsystem_check: exclude tests/external_board_native path
...
This test application must act as a regular application to showcase how to provide a board support from an external directory
2019-12-16 15:35:06 +01:00
Gaëtan Harter
41a891f284
tools: use 'BOARDSDIR' for the boards directory
...
Replace uses of 'RIOTBOARD' by 'BOARDSDIR' for tools.
2019-12-16 15:35:04 +01:00
Sebastian Meiling
80d86b42ee
tools/kconfig: replace GNU cp -t with UNIX cp
...
UNIX `cp` command does not have the `-t` option like its GNU variant.
Hence, it usage breaks building RIOT e.g. on FreeBSD.
2019-12-05 09:12:33 +01:00
benpicco
61353e04eb
Merge pull request #12860 from aabadie/pr/tools/ethos_fix_warning
...
tools/ethos: fix compilation warning in strncpy
2019-12-03 15:08:36 +01:00
Francisco
372ae95d28
Merge pull request #12628 from aabadie/pr/make/develhelp_cleanup
...
make/develhelp: make usage consistent + add ci check
2019-11-28 09:26:52 +01:00
abc99024df
tools/ethos: fix compilation warning in strncpy
2019-11-26 16:26:35 +01:00
Martine S. Lenders
ccc10432be
dist/tools/ci/print_toolchain_versions.sh: add ccache
2019-11-26 09:28:28 +01:00
Martine Lenders
95c6a785de
Merge pull request #12695 from leandrolanzieri/pr/dist/tools/add_kconfiglib
...
dist/tools: Add Kconfiglib
2019-11-25 11:51:02 +01:00
31fe89e4a2
dist/tools/uhcpd: fix typos
2019-11-23 22:39:37 +01:00
5c92411b3e
dist/tools/pic32prog: fix typos
2019-11-23 22:39:37 +01:00
801c5e3dd5
dist/tools/packer: fix typos
2019-11-23 22:39:37 +01:00
f012f88c2b
dist/tools/lazysponge: fix typos
2019-11-23 22:39:37 +01:00
f3538a2248
dist/tools/buildsystem_sanity_check: fix typos
2019-11-23 22:39:37 +01:00
09e8e1f612
dist/tools/backport_pr: fix typos
2019-11-23 22:39:37 +01:00
Francois Berder
4a31f94cfc
many typo fixes
...
Signed-off-by: Francois Berder <18538310+francois-berder@users.noreply.github.com>
2019-11-23 22:39:07 +01:00
8a76acf060
Merge pull request #12706 from fjmolinas/pr_fix_flake8
...
RIOT: fix PEP8 errors
2019-11-23 06:47:34 +01:00
Francisco Molina
2e8968fa17
dist/tools/pyterm/pyterm: fix PEP8 F841, unused variable
2019-11-22 11:47:49 +01:00
Francisco Molina
d2e90b2370
dist/tools/ethos/ethos.c: remove unusued var 'escaped'
2019-11-21 11:58:07 +01:00
Francisco Molina
2202b71f99
flake8: fix PEP8 overidentation E127
2019-11-21 10:11:56 +01:00
Leandro Lanzieri
b642f2ea23
dist/tools: Add kconfiglib
...
Kconfiglib is a Kconfig implementation in Python 2/3.
See https://github.com/ulfalizer/Kconfiglib
2019-11-19 17:46:38 +01:00
588766ab27
Merge pull request #12733 from fjmolinas/pr_jlink_serial
...
makefiles/tools/jlink.inc.mk: DEBUG_ADAPTER_ID as JLINK_SERIAL
2019-11-18 13:47:26 +01:00
Francisco Molina
f9ebc8658f
dist/tools/jlink: cleanup doc
2019-11-18 13:04:42 +01:00
Kevin "Tristate Tom" Weiss
be39169bd4
Merge pull request #11108 from gschorcht/cpu/esp8266/esp-idf/pr
...
cpu/esp8266: complete reimplementation based on ESP8266 RTOS SDK
2019-11-18 09:34:49 +01:00
Gunar Schorcht
555a7040db
cpu/esp8266: reset tool to allow automatic tests
2019-11-14 13:58:48 +01:00
Gunar Schorcht
fe028455e5
cpu/esp8266: esptool.py is provided as tool
...
The modified version esptool.py from RTOS SDK that is required for flashing an image, is now placed in `dist/tools/esptool.py` and used directly from there. The advantage is that `esptool.py` hasn't to be installed explicitly anymore. Having RIOT is enough. The documentation is adapted accordingly. The oly prerequisite is that python and the pyserial module are installed.
2019-11-14 13:58:48 +01:00
Benjamin Valentin
bff06a4d64
tools: add add_insufficient_memory_board.sh script
...
This adds a script that automatically compiles all examples & tests for a given
board and updates Makefile.ci if necessary.
2019-11-12 13:52:15 +01:00
86bd4d98a5
tools/build_system_sanity_check: add check for DEVELHELP
...
This variable should be set directly as it's hanbled after in Makefile.include, and not directly via CFLAGS
2019-11-06 16:32:47 +01:00
d69254b9df
tools/buildsystem_sanity_check: add check for APPLICATION in tests
...
This check verifies the APPLICATION variable is not set by tests application Makefiles. These applications should include the common test Makefile, where this variable is automatically set
2019-11-05 07:59:57 +01:00
Marian Buschsieweke
809d74bca6
dist/tools: Added script for C11 atomics compat
...
Added a script to determine the sizes of the default C11 atomic types and
generate an C++ header with preprocessor defines to access the sizes of the
types and an integer type of the same size (and therefore alignment
requirements).
2019-10-24 23:08:35 +02:00
050c077be7
dist/tools/codespell: update ignore list
...
changed wan -> WAN, codespell help says:
"Words are case sensitive based on how they are written in the dictionary file"
Thus WAN doesn't match but "wan" does.
Also added "dout" (short form of digital out).
2019-10-24 16:47:00 +02:00
62c244608d
tools/pr_check: add REMOVEME in keyword filtered
2019-10-22 08:07:40 +02:00
Francisco Molina
fb0f64630b
dist/buildsystem_sanity_check: add check for CPU_FAM/ARCH definition
...
- Check that CPU_FAM/ARCH is only exported in vars.inc.mk
2019-10-18 08:55:33 +02:00
Marian Buschsieweke
b6d23b56ae
dist/tools: Check BOARD_INSUFFICIENT_MEMORY usage
...
- Enforce that all applications do not manage BOARD_INSUFFICIENT_MEMORY in the
Makefile
- Match also "BOARD_INSUFFICIENT_MEMORY +=", not only
"BOARD_INSUFFICIENT_MEMORY :=" or "BOARD_INSUFFICIENT_MEMORY =".
2019-10-17 15:30:21 +02:00
benpicco
c9b76a9585
Merge pull request #12406 from maribu/pain_in_the_ass
...
examples: Moved CI infos to Makefile.ci
2019-10-15 14:40:40 +02:00
benpicco
10824e1cd0
Merge pull request #12251 from maz3max/bmp-tool
...
Add helper script for Black Magic Probe
2019-10-15 13:39:08 +02:00
Maximilian Deubel
30f12c9058
Add helper script for Black Magic Probe
...
This script can detect [Black Magic Probes](https://github.com/blacksphere/blackmagic/wiki ) and act as a flashloader (and more).
It is compatible with Linux and macOS.
All important options that can be set via the monitor command are available as arguments.
Makefiles for using `make flash`, `make erase`, `make debug` and `make term` with the script are included.
2019-10-15 12:58:24 +02:00
Marian Buschsieweke
2c996057c4
dist/tools: Check BOARD_INSUFFICIENT_MEMORY usage
...
Enforce BOARD_INSUFFICIENT_MEMORY is not managed in the Makefile in the examples
2019-10-15 09:55:07 +02:00
3e3768140c
tools/ci: fix typo in build_and_test.sh script
2019-10-10 15:48:18 +02:00
5d408d68c4
ci: add codespell check to track typos
2019-10-10 15:48:18 +02:00
Francisco
315e455643
Merge pull request #12413 from cladmi/pr/compile_and_test_for_board/flash_targets
...
tools/compile_and_test_for_board: allow setting the flash targets
2019-10-10 12:46:41 +02:00
Gaëtan Harter
7f2f0b6616
tools/compile_and_test_for_board: allow setting the flash targets
...
This allow configuring the flash targets in the same way as the
compilation and test targets.
This is part of trying to flash with docker using a different flash target.
2019-10-10 11:39:00 +02:00
