Leandro Lanzieri
75b371ccb0
boards/common/msba2: Set RTS and DTR to 0 when using Miniterm
2020-04-22 08:08:23 +02:00
Benjamin Valentin
a1276d7cd1
boards/mcb2388: remove XTIMER_OVERHEAD
...
It's not used anywhere.
2020-04-21 20:47:53 +02:00
Benjamin Valentin
40838ee4be
boards/mcb2388: add SAUL config for ADC
...
ADC0 is connected to a potentiometer on the board, so expose this
through SAUL.
2020-04-21 20:47:53 +02:00
Benjamin Valentin
161156b067
boards/mcb2388: enable all timers
2020-04-21 20:47:53 +02:00
Benjamin Valentin
45947c0fcd
boards/mcb2388: define flank of the on-board button
...
Define the button flank for tests that use this define.
2020-04-21 20:47:53 +02:00
Benjamin Valentin
d906d5aef8
boards/mcb2388: configure second SPI bus
...
SPI0 will always clash with the pins of the LCD display, so if we
want to use both SPI and the display we need to use SPI1.
2020-04-21 20:47:53 +02:00
Leandro Lanzieri
9463f85d39
makefiles/serial: Add variable for Miniterm flags
2020-04-21 17:56:16 +02:00
3e922f878a
Merge pull request #13875 from fjmolinas/pr_core_macros
...
core/includes: add common macros file
2020-04-21 15:32:51 +02:00
Francisco Molina
57938de035
core/doc: fix alignment
2020-04-21 15:10:56 +02:00
Francisco Molina
da90407572
cpu/esp_common/include: include common xtstr header
2020-04-21 15:10:55 +02:00
Francisco Molina
cbcb882454
core/include: add xtstr macro
2020-04-21 15:10:55 +02:00
19119f142a
Merge pull request #13558 from fjmolinas/pr_mtd_powerup
...
drivers/mtd_spi_nor: power up MTD on init
2020-04-21 13:53:07 +02:00
Akshai M
3a65d163f6
drivers/dose : Expose to Kconfig
...
Expose Configurations to Kconfig
Co-Authored-By: Leandro Lanzieri <leandro.lanzieri@haw-hamburg.de>
2020-04-21 16:00:25 +05:30
Akshai M
0784190c9c
drivers/dose : Add CONFIG_
...
Add CONFIG_ Prefix for DOSE_TIMEOUT_USEC
2020-04-21 16:00:25 +05:30
Leandro Lanzieri
46507ff247
Merge pull request #13894 from kb2ma/gcoap/ping
...
net/gcoap: add CoAP ping request
2020-04-21 12:23:54 +02:00
5293e5400c
Merge pull request #13210 from kaspar030/add_xtimer_left
...
sys/xtimer: remove uses of xtimer internal struct members
2020-04-21 12:15:41 +02:00
1492dc0655
tests/gnrc_ipv6_nib: memory-blacklist msb-430h
2020-04-21 11:26:57 +02:00
84594e94cb
pkg/ndn-riot: update patch to do implizit xtimer_t zeroing
2020-04-21 11:26:57 +02:00
2f9b77920d
pkg/semtech-loramac: TimerInit(): use static struct initializer
...
Previously, TimerInit() explicitly set some values of the xtimer truct
to "0". This commit changes it to use a static struct initializer
`(xtimer_t){0}`. The advantage is that now this is independent of the
actual xtimer structure.
Now this also resets the remaining xtimer fields, but they're properly
re-populated elsewhere (by using xtimer_set_msg()).
2020-04-21 11:26:57 +02:00
9800b7bf2c
tests/bench_timers: remove explicit zeroing of xtimer members
2020-04-21 11:26:57 +02:00
c1f93647a9
tests/rng: remove explicit zeroing of xtimer members
2020-04-21 11:26:56 +02:00
0228553384
sys/shell: rpl: make use of xtimer_left_usec()
2020-04-21 11:26:56 +02:00
df520a70a7
sys/evtimer: make use of xtimer_left_usec()
2020-04-21 11:26:56 +02:00
c9c8c98a4b
sys/xtimer: introduce xtimer_left_usec()
2020-04-21 11:26:56 +02:00
Francisco Molina
61eecf6fe0
drivers/mtd_spi_nor: power up MTD on init
2020-04-21 11:09:40 +02:00
Francisco Molina
8a256eba12
drivers/mtd_spi_nor: return error on invalid manuf id
2020-04-21 11:09:40 +02:00
Francisco
3d8f71768c
Merge pull request #13846 from benpicco/Makefile-THISDIR
...
Makefile.include: add $(MAKEFILEDIR) helper and use it
2020-04-21 11:00:52 +02:00
40cb065a45
Merge pull request #13839 from leandrolanzieri/pr/kconfig_migrate/sys/usbus_ecm
...
usbus/cdc/ecm: Expose configurations to Kconfig
2020-04-21 10:12:30 +02:00
Leandro Lanzieri
b2bac47130
Merge pull request #13872 from fjmolinas/pr_pseudomodules_doc
...
doc/creating-modules.md: correct PSEUDOMODULES documentation
2020-04-21 10:02:33 +02:00
Francisco Molina
67910a1219
doc/creating-modules.md: correct PSEUDOMODULES documentation
2020-04-21 09:25:06 +02:00
Francisco
31278b0f34
Merge pull request #13906 from MBradbury/pr/cc2538_receive
...
cpu/cc2538: Prevent underflow of the RX FIFO
2020-04-20 20:17:18 +02:00
Matthew Bradbury
ba51e90228
cpu/cc2538: Flush the RX FIFO (if overflowed) after a receive
2020-04-20 18:19:23 +01:00
Matthew Bradbury
bcfb437746
cpu/cc2538: Do not check XREG_RSSISTATbits for RSSI_VALID
2020-04-20 18:18:56 +01:00
Matthew Bradbury
ecfe4a4e8f
cpu/cc2538: Check CRC of received message after reading message contents
2020-04-20 18:18:56 +01:00
Matthew Bradbury
fc0581056a
cpu/cc2538: Check for a minimum length to read from a received frame
2020-04-20 18:18:56 +01:00
Matthew Bradbury
f0e48f0741
cpu/cc2538: Prevent underflow of the RX FIFO
2020-04-20 18:18:53 +01:00
Leandro Lanzieri
d8fa69d1e2
Merge pull request #13897 from akshaim/Kconfig_cc110x
...
drivers/cc110x : Expose Configurations to Kconfig
2020-04-20 13:32:23 +02:00
Ken Bannister
cac350901f
Merge pull request #13893 from cgundogan/pr/nanocoap-get-opt-uint
...
nanocoap: export coap_opt_get_uint()
2020-04-18 10:00:27 -04:00
Martine Lenders
55a7010a0a
Merge pull request #13157 from nmeum/pr/fuzzing_tcp_only
...
Add AFL-based fuzzing setup for network modules
2020-04-18 10:54:14 +02:00
Cenk Gündoğan
6859de7855
nanocoap: export coap_opt_get_uint()
2020-04-17 22:39:44 +02:00
Akshai M
be097f8533
drivers/cc110x : Expose to Kconfig
...
Expose Configurations to Kconfig
2020-04-17 23:55:07 +05:30
Akshai M
01a8c64e39
drivers/cc110x : Add CONFIG_
...
Add Add CONFIG_ Prefix for CC110X_DEFAULT_CHANNEL
2020-04-17 23:27:01 +05:30
Sören Tempel
24d71f9d15
makefiles: Add the fuzzing/ directory to APPLICATION_DIRS
...
This should ensure that fuzzing applications are build by the CI.
2020-04-17 17:11:15 +02:00
Sören Tempel
830479ece5
fuzzing: Add some documentation on writing fuzzing applications
2020-04-17 17:11:15 +02:00
Sören Tempel
0a189c2d73
fuzzing/gnrc_tcp: Initialize
2020-04-17 17:11:15 +02:00
Sören Tempel
ac9c1f4a69
gnrc_tcp: disable checksum checks during fuzzing
2020-04-17 17:11:15 +02:00
Sören Tempel
24468bead6
fuzzing: Initialize
...
This adds a new subdirectory called `fuzzing/` which will contain
applications for fuzzing various RIOT network modules in the future.
This subdirectory is heavily inspired by the `examples/` subdirectory.
The fuzzing applications use AFL as a fuzzer. Each application contains
Makefiles, source code, and an input corpus used by AFL to generate
input for fuzzing.
2020-04-17 17:11:15 +02:00
Leandro Lanzieri
2f75c60527
Merge pull request #13881 from akshaim/kconfig_ads101x
...
drivers/ads101x : Expose Configurations to Kconfig
2020-04-17 15:39:07 +02:00
Ken Bannister
c267633d74
examples/gcoap: add ability to generate CoAP ping request
2020-04-17 08:15:20 -04:00
Ken Bannister
6eae4ded84
net/gcoap: create CoAP ping request
2020-04-17 08:15:20 -04:00
