Benjamin Valentin
0d59e7dc6e
makefiles/tools/openocd-adapters: default to SWD, but make it configurable
2020-08-04 10:36:39 +02:00
benpicco
77be30dee6
Merge pull request #14613 from benpicco/openocd-buspirate
...
makefiles/buspirate: add Bus Pirate as Debug Adapter
2020-08-03 15:34:49 +02:00
Benjamin Valentin
1a04425d7b
makefiles/buspirate: add Bus Pirate as Debug Adapter
...
Flash with PROGRAMMER=openocd DEBUG_ADAPTER=buspirate
2020-08-03 14:10:42 +02:00
Leandro Lanzieri
cf779a7241
makefiles/kconfig.mk: Remove duplicate calls to merge_config
2020-08-03 12:26:05 +02:00
Leandro Lanzieri
6a5c7744cb
makefiles/kconfig.mk: include KCONFIG_OUT_CONFIG always
...
This allows to include KCONFIG_OUT_CONFIG file in Makefile
unconditionally, which means that `make clean all` is allowed when using
Kconfig.
For this, the recipe for `clean` is guarded with `MAKE_RESTARTS` so
the BINDIR folder is not removed once Make restarts scanning the files.
2020-07-31 13:55:33 +02:00
benpicco
7e4b3d0f40
Merge pull request #14653 from Nishchay-sopho/drivers/sdp3x_#14603
...
driver/sdp3x: Resolved irq pin code used even if irq pin not connected
2020-07-31 01:22:02 +02:00
nagrawal
7cc4f2b79b
driver/sdp3x: Resolved irq pin code used even if irq pin not connected
...
irq_pin check when multiple sensors connected with or without irq pin
2020-07-30 16:35:35 +02:00
Leandro Lanzieri
788ae39e73
Merge pull request #14645 from cgundogan/pr/kconfig/sync-deps
...
kconfig: make sync-deps flag accessible
2020-07-29 16:55:32 +02:00
Cenk Gündoğan
53eb1efe1b
kconfig: make sync-deps flag accessible
2020-07-29 15:33:07 +02:00
Martine Lenders
0e3aa2fff5
Merge pull request #14632 from benpicco/netif_single
...
gnrc_netif: replace GNRC_NETIF_SINGLE with gnrc_netif_single pseudo-module
2020-07-28 17:56:51 +02:00
Benjamin Valentin
0c06694f72
gnrc_netif: replace GNRC_NETIF_SINGLE with gnrc_netif_single pseudo-module
2020-07-28 13:59:20 +02:00
Marian Buschsieweke
057aae1d04
makefiles/vars.inc.mk: Export FEATURES_USED
...
This is needed so that features used can be reliably be accessed.
2020-07-23 20:18:33 +02:00
Benjamin Valentin
96c67b0fa5
drivers/soft_uart: add software based UART implementation
2020-07-14 22:51:59 +02:00
Martine S. Lenders
4f243c52ea
pkg/emb6: remove deprecated package
...
Deprecation was noted in 7cf1bab2e6
2020-07-11 02:18:17 +02:00
benpicco
0bf3a2e279
Merge pull request #14476 from ML-PA-Consulting-GmbH/fix/20200706__sdcard_spi_auto_init
...
drivers/sdcard_spi: remove auto-init
2020-07-10 15:53:17 +02:00
c8b0f972df
makefiles/tools: add common bossa makefile
2020-07-10 11:56:11 +02:00
Daniel Lockau
0d3dc120ef
drivers/sdcard_spi: remove auto-init
2020-07-09 08:50:53 +02:00
MrKevinWeiss
04630d20ba
sys/shell: Add optional hooks for shell commands
...
Introduce optional user shell_post_readline_hook, shell_pre_command_hook, shell_post_command_hook.
Enable with USEMODULE=shell_hooks.
Calls user implemented *_hook functions if defined.
If implementation does not exist, nothing happens.
The intent is to make profiling of the shell command timings easier.
Test provided in tests/shell with USEMODULE=shell_hooks.
2020-07-07 17:00:38 +02:00
Leandro Lanzieri
f85f2e7b62
Merge pull request #14433 from cgundogan/pr/make_cleanups
...
make: use $(MAKE) instead of direct `make` call
2020-07-03 13:42:04 +02:00
Cenk Gündoğan
7aa499d5f1
make: use $(MAKE) instead of direct make call
2020-07-03 12:03:06 +02:00
c7189cfe99
makefiles/sam0: only fail on missing device with explicit targets
2020-07-03 10:24:40 +02:00
Francisco
41888674a4
Merge pull request #14385 from aabadie/pr/make/appdeps_export
...
boards/mips: remove use of APPDEPS, un-export globally APPDEPS
2020-07-01 09:13:35 +02:00
Francisco
1004fb3f83
Merge pull request #13382 from chrysn-pull-requests/usb-check-unification
...
usb: Warn on test-ID usage in a unified location
2020-06-30 13:30:14 +02:00
Leandro Lanzieri
955efd85ff
drivers/at: Add at_urc_isr module to process URCs upon arrival
2020-06-30 11:41:13 +02:00
chrysn
85d7042732
usb Kconfig: Provide explicit defaults
...
See-Also: https://github.com/RIOT-OS/RIOT/pull/13382#discussion_r380506106
2020-06-30 10:51:42 +02:00
chrysn
a181c0dbcd
usb: Use separate Makefile for configuration and checks
2020-06-30 10:51:40 +02:00
Gunar Schorcht
028c0d4b3c
Merge pull request #14353 from fjmolinas/pr_reorder_makefiles_cleanup
...
Makefile: use normal conditionals
2020-06-30 09:59:02 +02:00
Francisco Molina
e98341da93
Makefile: use normal conditionals
2020-06-29 22:40:29 +02:00
benpicco
f372beb405
Merge pull request #12363 from maribu/dfplayer
...
drivers/dfplayer: New driver for the DFPlayer Mini MP3 player
2020-06-28 23:24:36 +02:00
Marian Buschsieweke
d2f3cafa45
sys/auto_init: Added auto-init for multimedia
...
Added auto-init hook for multimedia device drivers
2020-06-28 21:06:14 +02:00
df51ff7617
makefiles/vars.inc.mk: don't export APPDEPS globally
2020-06-28 12:14:31 +02:00
Gunar Schorcht
660a852935
drivers: add netdev driver for ATWINC15x0 WiFi module
2020-06-26 12:33:38 +02:00
e3f6c0f340
core: make idle thread optional
2020-06-25 16:02:28 +02:00
Francisco
a665fcc542
Merge pull request #14123 from jue89/fix/ztimer_pseudomodules
...
ztimer: relocate PSEUDOMODULES definitions
2020-06-24 22:56:07 +02:00
Benjamin Valentin
a653667172
makefiles/boards/sam0.inc.mk: dap: use OpenOCD for debugging
...
ebdg can only be used for flashing, we still have to use OpenOCD for
debugging.
fixes #14328
2020-06-24 16:06:12 +02:00
499cd934a2
makefiles/vars.inc.mk: export NM and RANLIB variables
2020-06-24 11:01:01 +02:00
080d5caa17
makefiles/toolchain: don't export all variables
...
There are already exported globally in vars.inc.mk
2020-06-24 11:00:54 +02:00
df58141e15
Makefile.include: don't define GITCACHE and GIT_CACHE_DIR globally
2020-06-23 14:54:25 +02:00
ebc147d058
drivers/mhz19: initial support
2020-06-17 08:41:41 +02:00
Leandro Lanzieri
649017f0b2
cpu/cortexm_common: Rename arch_cortexm feature to cpu_core_cortexm
2020-06-16 12:05:41 +02:00
Leandro Lanzieri
4d65bc8e0a
cpu: Rename CPU_ARCH to CPU_CORE
2020-06-16 12:05:40 +02:00
Francisco
b041221905
Merge pull request #13825 from kaspar030/cortexm_free_svc
...
cpu/cortexm: "free" SVC
2020-06-16 10:31:09 +02:00
Benjamin Valentin
2325dba871
makefiles/bossa: move USB reset logic to common file
2020-06-11 11:56:35 +02:00
24facae6fb
makefiles/features_modules: add cortexm_svc
2020-06-10 23:12:58 +02:00
dbe7331d10
cpu/cortexm: "free" SVC
2020-06-10 23:12:58 +02:00
benpicco
75d82cc9b8
Merge pull request #14209 from btcven/2020_06_04-common-cfg
...
boards/cc26x2_cc13x2-based: move config to common directory
2020-06-10 15:32:11 +02:00
Francisco
2afcef2e40
Merge pull request #13006 from benpicco/make-fix-nixos
...
makefiles/color: fix build on NixOS
2020-06-09 18:13:29 +02:00
1ed0d659ed
Merge pull request #13320 from bergzand/pr/stdio/semihosting
...
stdio_semihosting: Initial include of Semihosting-based STDIO
2020-06-09 16:52:44 +02:00
99ca736b53
stdio_semihosting: Initial include of Semihosting-based STDIO
2020-06-09 10:15:49 +02:00
aff18b9599
tools/openocd: add OPENOCD_DBG_EXTRA_CMD
2020-06-09 10:14:57 +02:00
b82c1e8707
makefiles: add common makefile for auto_init modules
2020-06-08 10:27:35 +02:00
Jean Pierre Dudey
c0f6b3d58a
tools/uniflash.inc.mk: allow changing config dir
...
Signed-off-by: Jean Pierre Dudey <jeandudey@hotmail.com>
2020-06-04 17:12:19 -05:00
Marian Buschsieweke
98824df68b
makefiles/boards/sam0.inc.mk: Allow other programmers
...
Modified to allow including sam0.inc.mk even if none of the programmers handled
their is used. This is useful for boards that by default are programmed via a
bootloader. Still including sam0.inc.mk allows users to specify the `PROGRAMMER`
to use jlink, openocd, or edgb instead of the bootloader.
2020-06-04 21:28:17 +02:00
Leandro Lanzieri
3716457f94
makefiles/dependencies_debug: Add target to print Kconfig features
...
This adds a target to print all features provided computed from Kconfig
files for a given board.
2020-06-02 17:42:16 +02:00
4cd1d54715
makefiles/stlink: fix path to default stm32 openocd config files
2020-05-27 15:44:28 +02:00
bd919cf2f1
Merge pull request #14129 from fjmolinas/pr_fix_info-boards-supported
...
makefiles/info-global.inc.mk: fix info-boards-supported
2020-05-25 21:50:12 +02:00
Leandro Lanzieri
8bb51e9423
makefiles/info-global: Remove dependency resolution cache
...
This removes a preliminar dependency resolution that is performed
without including features, to skip a full dependency resolution when
boards can be proven to be unsupported on an earlier stage.
This was introducing issues on some boards since the blacklisting of
some features depends on board information which is not available at the
time of performing this resolution.
2020-05-25 11:07:15 +02:00
Francisco Molina
8eee779c50
makefiles/info-global.inc.mk: add info-boards-features-blacklisted
2020-05-25 09:48:36 +02:00
Francisco Molina
1c01e46956
makefiles/info-global.inc.mk: fix info-boards-supported
...
When using eval the function board_unsatisfied_features is evaluated
twice, in the first evaluation this will lead to the previous value
for `BOARDS` to be expanded, so escape all occurrences.
2020-05-25 09:45:06 +02:00
Juergen Fitschen
5a54c29f09
xtimer_on_ztimer: move PSEUDOMODULES definition to pseudomodules.inc.mk
2020-05-23 16:37:45 +02:00
012a0b02a8
makefiles/stlink: fix common config filename
2020-05-20 13:39:11 +02:00
Martine Lenders
59da69ef6c
Merge pull request #14022 from benpicco/gnrc_netif_bus
...
gnrc/netif: add IPv6 event bus
2020-05-20 12:36:07 +02:00
Benjamin Valentin
85100ad61a
gnrc_netif: add message bus to interface
...
Allow threads to listen for events on an interface.
2020-05-20 10:44:11 +02:00
Francisco
99e7b81d10
Merge pull request #8573 from aabadie/pr/generator
...
makefiles: add code generator targets
2020-05-20 09:44:14 +02:00
Leandro Lanzieri
16113afb1e
Merge pull request #14026 from miri64/gnrc_netif/fix/deps
...
gnrc_netif: use gnrc_netif-submodules to pull in upper-layer struct members
2020-05-19 16:36:18 +02:00
Martine S. Lenders
5e8f8ddc4a
gnrc_netif: introduce gnrc_netif_mac pseudo-module for gnrc_mac members
...
This aims to reduce circular dependencies in GNRC.
2020-05-19 16:10:59 +02:00
Martine S. Lenders
a48629b395
gnrc_netif: introduce gnrc_netif_ipv6 pseudo-module for IPv6 members
...
This aims to reduce circular dependencies in GNRC.
2020-05-19 16:10:59 +02:00
Martine S. Lenders
9801a439fc
gnrc_netif: introduce gnrc_netif_6lo pseudo-module for 6LoWPAN members
...
This aims to reduce circular dependencies in GNRC.
2020-05-19 16:10:59 +02:00
a534caebb4
makefiles: add code generator targets
...
These targets will bootstrap code for an example application, a test application or a new board support. The 'riotgen' tool is used behind
2020-05-17 17:52:43 +02:00
benpicco
e45777d077
Merge pull request #13809 from Vinggui/master
...
Added a new flashing parameter for generic cheap St-link and bluepill(-128kib) boards.
2020-05-12 11:48:43 +02:00
Leandro Lanzieri
34689a290c
Merge pull request #13994 from miri64/gnrc_nettype/enh/use-pseudomodules
...
gnrc_nettype: indirect NETTYPE definition via pseudo-modules
2020-05-05 20:59:44 +02:00
Martine S. Lenders
1c251beb03
gnrc_nettype: indirect NETTYPE definition via pseudo-modules
...
Instead of making a NETTYPE definition dependent on an implementation
module, this change makes it dependent on a pseudo-module for each
specific NETTYPE and makes the respective implementation modules
dependent on it.
This has two advantages:
- one does not need include the whole implementation module to
subscribe to a NETTYPE for testing or to provide an alternative
implementation
- A lot of circular dependencies related to GNRC could be untangled.
E.g. the only reason `gnrc_icmpv6` needs the `gnrc_ipv6` is because it
uses `GNRC_NETTYPE_IPV6` to search for the IPv6 header in an ICMPv6
when demultiplexing an ICMPv6 header.
This change does not resolve these dependencies or include usages where
needed. The only dependency change is the addition of the
pseudo-modules to the implementation modules.
2020-05-05 19:16:06 +02:00
36a80a14be
Merge pull request #13678 from fjmolinas/pr_docker_run_make
...
makefiles/docker.inc.mk: add and use generic docker_run_make
2020-05-05 16:46:10 +02:00
Francisco Molina
7c528c7ecd
makefiles/docker.inc.mk: add and use generic docker_run_make
...
DOCKER_MAKE_ARGS only hold additional make args like '-j'
2020-05-05 14:41:13 +02:00
Vinicius G. Guimaraes
f8776a989f
boards/blxxxpill: add support for stm32duino bootloader and for generic St-Link V2.
2020-05-04 19:36:15 -07:00
Hauke Petersen
c333b7e896
mk/boards/stm32: add JLink support
2020-05-04 16:42:25 +02:00
Francisco
919249f361
Merge pull request #13862 from maribu/extra_boards
...
Makefile*: Allow multiple external board dirs
2020-04-29 20:12:06 +02:00
Marian Buschsieweke
ba7815163c
Makefile*: Allow multiple external board dirs
...
- Add the new EXTERNAL_BOARD_DIRS variable that can contain a space separated
list of folders containing external boards
- Introduce $(BOARDDIR) as shortcut for $(BOARDSDIR)/$(BOARD)
- Map the existing BOARDSDIR to the new approach
- If BOARDSDIR is provided by the user, it will be added to
EXTERNAL_BOARD_DIRS for backward compatibility. (And a warning is issued
to encourage users migrating to EXTRA_BOARDS.)
- BOARDSDIR is updated after the board is found to "$(BOARDDIR)/..".
- Useful for `include $(BOARDSDIR)/common/external_common/Makefile.dep`
- Provides backward compatibility
2020-04-29 18:32:39 +02:00
Francisco
80b300289d
Merge pull request #13912 from benpicco/at86rf215-mr-qpsk
...
drivers/at86rf215: implement MR-O-QPSK
2020-04-29 12:44:00 +02:00
Benjamin Valentin
fac35644d0
ieee802154: add definitions & config options for MR-O-QPSK
...
Define options for IEEE 802.15.4g MR-O-QPSK as well as shell commands
to set them via ifconfig.
2020-04-29 10:41:37 +02:00
ab8ad3f990
makefiles/vars: document EEPROM_FILE variable
2020-04-29 08:56:34 +02:00
Martine Lenders
633d0f486d
Merge pull request #13669 from bergzand/pr/netif/async_events
...
gnrc_netif: Add support for internal event loop
2020-04-28 13:03:39 +02:00
Leandro Lanzieri
ed38bd86d4
makefiles/kconfiglib: Use RIOT specific menuconfig script
2020-04-27 12:29:40 +02:00
Leandro Lanzieri
9463f85d39
makefiles/serial: Add variable for Miniterm flags
2020-04-21 17:56:16 +02:00
Leandro Lanzieri
d8fa69d1e2
Merge pull request #13897 from akshaim/Kconfig_cc110x
...
drivers/cc110x : Expose Configurations to Kconfig
2020-04-20 13:32:23 +02:00
Martine Lenders
55a7010a0a
Merge pull request #13157 from nmeum/pr/fuzzing_tcp_only
...
Add AFL-based fuzzing setup for network modules
2020-04-18 10:54:14 +02:00
Akshai M
01a8c64e39
drivers/cc110x : Add CONFIG_
...
Add Add CONFIG_ Prefix for CC110X_DEFAULT_CHANNEL
2020-04-17 23:27:01 +05:30
Sören Tempel
24d71f9d15
makefiles: Add the fuzzing/ directory to APPLICATION_DIRS
...
This should ensure that fuzzing applications are build by the CI.
2020-04-17 17:11:15 +02:00
Sören Tempel
24468bead6
fuzzing: Initialize
...
This adds a new subdirectory called `fuzzing/` which will contain
applications for fuzzing various RIOT network modules in the future.
This subdirectory is heavily inspired by the `examples/` subdirectory.
The fuzzing applications use AFL as a fuzzer. Each application contains
Makefiles, source code, and an input corpus used by AFL to generate
input for fuzzing.
2020-04-17 17:11:15 +02:00
Joakim Nohlgård
2013ac75f5
gnrc_netif: Add support for internal event loop
...
Enabled by the gnrc_netif_events pseudo module. Using an internal event
loop within the gnrc_netif thread eliminates the risk of lost interrupts
and lets ISR events always be handled before any send/receive requests
from other threads are processed.
The events in the event loop is also a potential hook for MAC layers and
other link layer modules which may need to inject and process events
before any external IPC messages are handled.
Co-Authored-By: Koen Zandberg <koen@bergzand.net>
2020-04-17 12:02:39 +02:00
Francisco Molina
2331448644
Makefile: remove usage of SUBMODULES_NOFORCE
...
With #10970 only existing *.c files will be added to SRC when using
the SUBMODULES mechanism, so SUBMODULES_NOFORCE (used to filter out
non existing source files) is now redundant so remove the usage.
2020-04-15 12:11:44 +02:00
Dylan Laduranty
faa0afd8c1
Merge pull request #13381 from benpicco/sam0-jlink-fix
...
makefiles/sam0.inc.mk: fix detection of JLinkExe
2020-04-14 20:29:43 +02:00
Leandro Lanzieri
a06d9bbb66
Merge pull request #13315 from jia200x/pr/kconfig/ieee802154
...
ieee802154: Expose configurations to Kconfig
2020-04-08 19:34:55 +02:00
Jose Alamos
77325b4cde
ieee802154: add CONFIG_ prefix to config macros
2020-04-08 19:08:25 +02:00
Jose Alamos
c712b72400
makefiles/default-radio-settings: disable if Kconfig
...
If Kconfig is used for configuring default parameters of radios, this
logic has to be disabled in order to avoid collisions of config macros
2020-04-08 19:07:33 +02:00
Leandro Lanzieri
4ae944bac2
makefiles/kconfig: Output out.config with generated configuration
...
'merged.config' may not always be present (e.g. when no files to merge
are present). In order to always have an up-to-date configuration file
'out.config' will be generated mirroring the content of 'autoconf.h'.
This is the file that the build system will include to read the current
configuration symbols.
2020-04-08 17:37:05 +02:00
1f9ff9e767
makefiles/bossa: only use ROM_OFFSET with version 1.9
2020-04-08 09:58:21 +02:00
a12aeca9df
makefiles/stdio: handle case for bootloader_nrfutil blacklist
2020-04-08 09:35:08 +02:00
ebd1e8f016
makefiles/tools: add support for nrfutil
2020-04-08 09:35:08 +02:00
Sören Tempel
d7104e4992
makefiles/toolchain: add support for afl
2020-04-07 14:24:10 +02:00
Leandro Lanzieri
d60295db3c
Merge pull request #13720 from aabadie/pr/native_no_export
...
native: only export NATIVEINCLUDES in vars.inc.mk
2020-04-07 12:55:45 +02:00
010aca2638
Merge pull request #13719 from aabadie/pr/boards/flash_export_remove
...
boards*: remove remaining uses of export with some openocd related variables
2020-04-07 11:58:28 +02:00
75e828fdeb
makefiles/openocd: define flash targets in a variable
2020-04-07 11:38:10 +02:00
5e0d5d3302
Merge pull request #13774 from fjmolinas/pr_dependencie_debug_cpu_arch
...
makefiles/dependencies_debug.inc.mk: add CPU_ARCH
2020-04-03 09:40:59 +02:00
benpicco
0c7612673b
Merge pull request #13793 from ML-PA-Consulting-GmbH/make_riotboot_external_boards
...
riotboot: forward BOARDSDIR
2020-04-03 09:35:50 +02:00
Francisco Molina
abff884165
makefiles/info-global.inc.mk: undefine CPU_ARCH and CPU_FAM
...
Undefine variables that shouldnt be set at the start of resolution
and that might be used in dependency resolution.
2020-04-03 09:17:23 +02:00
Francisco Molina
b290b0d0c5
makefiles/dependencies_debug.inc.mk: add CPU_ARCH
2020-04-03 09:17:23 +02:00
192c8515b1
Merge pull request #13791 from fjmolinas/pr_remove_stdio_default_module
...
*/Makefile.dep: remove usage of DEFAULT_MODULE += stdio%
2020-04-02 16:23:15 +02:00
Sven Herrmann
9a58aaa354
riotboot: forward BOARDSDIR
2020-04-02 14:21:42 +00:00
Francisco Molina
0e5205c4a5
*/Makefile.dep: remove usage of DEFAULT_MODULE += stdio%
2020-04-02 14:50:18 +02:00
Leandro Lanzieri
c74544c9ec
Merge pull request #13349 from maribu/dependency-or
...
build system: Restructure dependency resolution
2020-04-02 10:40:44 +02:00
Marian Buschsieweke
af21f15b02
makefiles: Minor clean ups
...
- Add FEATURES_REQUIRED_ANY to dependency-debug:
Now `make dependency-debug` by default also stores the contents of
`FEATURES_REQUIRED_ANY`.
- makefiles/features_check.inc.mk: Break long lines
- {tests/minimal,tests/unittests,bootloaders/riotboot}:
Disable auto_init_% in addition to auto_init.
This works around weird behavior due to the USEMODULE being recursively expended
in the first iteration of dependency resolution: Modules added to DEFAULT_MODULE
get automatically added to USEMODULE during the first run, but not for
subsequent. This should be iron out later on.
2020-04-02 09:56:39 +02:00
Marian Buschsieweke
7bc15acee2
build system: Restructure dependency resolution
...
Goals:
- Untangle dependency resolution and feature checking for better maintainability
- Improve performance of "make info-boards-supported"
Changes:
- Makefile.dep
- Dropped handling of default modules and recursion
- Now only dependencies of the current set of used modules and pkgs are
added
==> External recursion is needed to catch transient dependencies
- Changed Makefile.features:
- Dropped checking of provided features
- Dropped populating FEATURES_USED with provided features that are required
or optional
- Dropped populating FEATURES_MISSING with required but not provided
features
- Dropped adding modules implementing used features to USE_MODULE
==> This now only populates FEATURES_PROVIDED, nothing more
- Added makefiles/features_check.inc.mk:
- This performs the population of FEATURES_USED and FEATURES_MISSING now
- Added makefiles/features_modules.inc.mk:
- This performs now the addition of modules implementing used features
- Added makefiles/dependency_resolution.inc.mk:
- This now performs the recursion required to catch transient dependencies
- Also the feature check is performed recursively to handle also required
and optional features of the transient dependencies
- DEFAULT_MODULES are added repeatedly to allow it to be extended based on
used features and modules
==> This allows modules to have optional dependencies, as these
dependencies can be blacklisted
- Use simply expanded variables instead of recursively expended variables
(`foo := $(bar)` instead `foo = $(bar)`) for internal variables during feature
resolution. This improves performance significantly for
`make info-boards-supported`.
- Reduce dependency resolution steps in `make info-boards-supported`
- Globally resolve dependencies without any features (including arch)
provided
==> This results in the common subset of feature requirements and modules
used
- But for individual boards additional modules might be used on top due
to architecture specific dependencies or optional features
- Boards not supporting this subset of commonly required features are not
supported, so no additional dependency resolution is needed for them
- For each board supporting the common set of requirements a complete
dependency resolution is still needed to also catch architecture specific
hacks
- But this resolution is seeded with the common set of dependencies to
speed this up
2020-04-02 09:55:07 +02:00
benpicco
660b1a9b5f
Merge pull request #10083 from gschorcht/drivers_hmc5883l
...
drivers: add driver for Honeywell HMC5883L magnetometer
2020-04-01 14:49:34 +02:00
Gunar Schorcht
e6090adb3f
drivers: add hmc5883l device driver
2020-04-01 13:37:22 +02:00
Leandro Lanzieri
ea2f963302
cpu/cortexm: Add 'cortexm_fpu' as a DEFAULT_MODULE if possible
...
This adds cortexm_fpu to the DEFAULT_MODULE list when the feature
cortexm_fpu is provided by the architecture. It also moves the
dependency resolution of this module to the architecture-specific
Makefile.dep file.
2020-04-01 09:46:29 +02:00
Leandro Lanzieri
64552a3b9a
cpu/cortexm_common: Move common modules to Makefile.dep
...
This moves the following modules to a architecture-specific Makefile.dep
file:
- cortexm_common
- cortexm_common_periph
- newlib
- newlib_nano
- periph
2020-04-01 09:46:21 +02:00
Marian Buschsieweke
3628db19fd
Makefile.features: Allow "one out of" dependencies
...
An application/test/module that requires one feature out of a set of
alternatives (let's say either periph_uart, periph_spi, or periph_i2c) can
request this now using:
FEATURES_REQUIRED_ANY += periph_uart|periph_spi|periph_i2c
2020-04-01 09:12:50 +02:00
Benjamin Valentin
fc89531c61
sys/base64: Implement Base 64 Encoding with URL Safe Alphabet
...
RFC4648 specifies an alternate alphabet for base64 encoding / decoding
where '+' and '/' are exchanged for '-' and '-' to make the resulting
string safe to use in filenames and URLs.
This adds a base64url_encode() function that uses the alternate alphabet.
The base64_decode() function is extended to accept both alphabets.
2020-03-31 19:01:05 +02:00
91a553b3e2
makefiles/vars: export NATIVEINCLUDES there
2020-03-26 10:25:09 +01:00
308ee9b31c
makefiles/openocd: export OPENOCD_CMD_RESET_RUN only when required
2020-03-26 10:00:05 +01:00
a0be709a8c
makefiles/openocd: export PRE_FLASH_CHECK_SCRIPT only when required
2020-03-26 09:37:05 +01:00
fcecd6e362
makefiles/openocd: export OPENOCD_PRE_FLASH_CMDS only when required
2020-03-26 09:31:21 +01:00
93f1c7971c
makefiles/openocd: export OPENOCD_PRE_VERIFY_CMDS only when required
2020-03-26 09:31:11 +01:00
7d0c475113
Merge pull request #13486 from bergzand/pr/suit/ietf_v3
...
SUIT: Update to draft-ietf-v3
2020-03-20 14:44:29 +01:00
Francisco
cdbf0b2d69
Merge pull request #13583 from benpicco/at86rf215-minimal
...
drivers/at86rf215: add basic support for AT86RF215 dual-band radio
2020-03-20 09:33:50 +01:00
413b91326f
tests/suit_v3_manifest: Add draft-ietf-v3 manifest parser test
...
Co-authored-by: Kaspar Schleiser <kaspar@schleiser.de>
2020-03-19 22:56:01 +01:00
benpicco
b0fab9c53a
Merge pull request #13638 from gschorcht/sys/shell/rtt_command
...
sys/shell: add rtt command
2020-03-19 21:21:12 +01:00
Gunar Schorcht
3d20b0b6c5
sys/shell: add rtt command
2020-03-19 17:17:26 +01:00
521bb7e643
Merge pull request #11311 from benpicco/openocd-raspi
...
makefiles: add OpenOCD config for Raspberry Pi GPIO
2020-03-19 16:40:17 +01:00
Benjamin Valentin
d35511bee7
drivers/at86rf215: Add basic driver for the AT86RF215 radio
...
This adds a driver for the SPI based AT86RF215 transceiver.
The chip supports the IEEE Std 802.15.4-2015 and IEEE Std 802.15.4g-2012 standard.
This driver supports two versions of the chip:
- AT86RF215: dual sub-GHz & 2.4 GHz radio & baseband
- AT86RF215M: sub-GHz radio & baseband only
Both radios support the following PHY modes:
- MR-FSK
- MR-OFDM
- MR-O-QPKS
- O-QPSK (legacy)
The driver currently only implements support for legacy O-QPSK.
To use both interfaces, add
GNRC_NETIF_NUMOF := 2
to your Makefile.
The transceiver is able to send frames of up to 2047 bytes according to
IEEE 802.15.4g-2012 when operating in non-legacy mode.
Known issues:
- [ ] dBm setting values are bogus
- [ ] Channel spacing for sub-GHz MR-O-QPSK might be wrong
- [ ] TX/RX stress test will lock up the driver on openmote-b
2020-03-19 14:39:18 +01:00
Francisco Molina
9536a80e52
Makefile.dep: use stdio.inc.mk
...
Move all stdio dependencies to its own makefile
2020-03-18 15:58:38 +01:00
14bdf8f46b
sys/suit: Add SUIT draft ietf-v3 firmware upgrade module
...
Co-authored-by: Kaspar Schleiser <kaspar@schleiser.de>
2020-03-18 14:13:12 +01:00
accbfbd0d1
tools/bossa: add and configure preflash-delay when required
2020-03-18 10:43:05 +01:00
Francisco Molina
a31003a23c
tests: add interactive_sync adapted to shell
2020-03-17 17:23:27 +01:00
benpicco
a0cc4b0515
Merge pull request #13623 from Scallog/add_rom_offset_stm32
...
makefiles/boards/stm32.ink.mk: Use ROM_OFFSET with stm32flash
2020-03-16 12:09:40 +01:00
Corentin 'Kmikaz' Vigourt
6a559f1924
makefiles/boards/stm32.ink.mk: Use ROM_OFFSET with stm32flash
2020-03-16 10:47:32 +01:00
benpicco
db2ee4cbf6
Merge pull request #13634 from fjmolinas/pr_cc2538_flasher_guard
...
makefiles/tools/cc2538-bsl.inc.mk: allow FLASHER override
2020-03-16 00:58:37 +01:00
Francisco Molina
a00d61a2d6
makefiles/tools/cc2538-bsl.inc.mk: allow FLASHER override
...
If flasher is changed then make will still see it as a FLASH
dependency and try to execute the target which will likely not
exist.
A use case for this is when flashing on a remote machine and setting
FLASHER=ssh to then execute the FLASHER on the remote.
2020-03-15 11:58:39 +01:00
Robert Hartung
dc6665d5cf
Merge pull request #12717 from dylad/pr/bme680_pkg_driver
...
driver/bme680: add I2C/SPI driver for BME680 device
2020-03-12 14:00:40 +01:00
Francisco
3153a86551
Merge pull request #11192 from aabadie/pr/tools/dfu
...
boards: include common dfu logic where applicable
2020-03-12 09:05:32 +01:00
Gunar Schorcht
9dd11eb188
drivers: add support for BME680 driver
...
Add the support for BME680 based on the BME680 vendor driver package.
2020-03-12 08:42:59 +01:00
benpicco
52cc02c9a9
Merge pull request #13387 from nmeum/mpu_noexec_ram_ng
...
Add optional support for executable space protections
2020-03-11 20:00:44 +01:00
1e8037670b
Merge pull request #10420 from gschorcht/drivers_apds99xx
...
drivers: add driver for APDS99XX ambient light and proximity sensors
2020-03-11 16:27:53 +01:00
Schorcht
7548a6e849
drivers: add APDS99XX ALS and proximity
2020-03-11 14:21:47 +01:00
benpicco
008faef16a
Merge pull request #13581 from Scallog/olimexino-stm32-support
...
boards/olimexino-stm32: add support for olimexino-stm32 board
2020-03-11 11:40:53 +01:00
benpicco
d294e1d01c
Merge pull request #9572 from maribu/atmega-debug
...
On-Chip Debugging for AVR/ATmega based boards
2020-03-11 11:40:40 +01:00
Corentin 'Kmikaz' Vigourt
a4976c3333
makefiles/boards/stm32.inc.mk: add stm32flash support
2020-03-11 11:00:49 +01:00
6560a1f567
makefiles/jlink: export JLINK_PRE_FLASH to flash targets
2020-03-10 16:31:30 +01:00
5458f4d400
makefiles/jlink: export JLINK_RESET_FILE to required targets
2020-03-10 16:30:37 +01:00
04d32e9609
makefiles/jlink: export JLINK_IF to required targets
2020-03-10 16:29:02 +01:00
40e754c9d8
makefiles/jlink: only export JLINK_DEVICE when required
2020-03-10 16:28:03 +01:00
Francisco
6ba665858b
Merge pull request #13593 from aabadie/pr/boards/pyocd_export_remove
...
boards/pyocd: cleanup use of `export` keyword
2020-03-10 15:19:34 +01:00
Marian Buschsieweke
f2edcf9674
makefiles/tools/avrdude: Improved debug handling
...
- Choose correct debug protocol for ATmega328P (which supports debugWIRE instead
of JTAG)
- Allow overwriting debugger device via AVR_DEBUGDEVICE environment variable,
default to the Atmel-ICE (least expensive, supports most AVR devices)
2020-03-10 14:03:33 +01:00
Marian Buschsieweke
edd93411fe
dist: De-duplicated AVR debug config & scripts
...
Use common debug.sh, debug_srv.sh and gdb.conf for all AVR boards.
2020-03-10 12:54:51 +01:00
f56470925b
boards: include common dfu logic where applicable
2020-03-10 11:42:10 +01:00
23a3dcf828
makefiles/dfu: refactor configuration file
2020-03-10 11:42:10 +01:00
660b11261d
makefiles/dfu: remove unapplicable variables
2020-03-10 11:01:43 +01:00
benpicco
6f7293d7c3
Merge pull request #13559 from aabadie/pr/sys/crypto_modules_rework
...
sys/crypto: define cipher using a module instead of CFLAGS
2020-03-09 19:41:27 +01:00
Benjamin Valentin
74251383a0
makefiles: add OpenOCD config for Raspberry Pi GPIO
...
OpenOCD supports bit-banging the GPIOs of the Raspberry PI to emulate
an SWD flasher.
Add a raspi.inc.mk to support that option.
2020-03-09 19:12:40 +01:00
a83510c354
makefiles: add common file for cc2538-bsl flasher
2020-03-09 18:17:37 +01:00
fb27409b73
makefiles/pyocd: only export PYOCD_ADAPTER_INIT when required
2020-03-08 15:12:44 +01:00
2977b06a8d
makefiles/pyocd: only export FLASH_TARGET_TYPE when required
2020-03-08 15:12:44 +01:00
Sören Tempel
2c1a627118
Add mpu_noexec_ram pseudomodule
2020-03-07 13:09:55 +01:00
f6c4e269b1
sys/crypto: define ciphers via pseudomodules
2020-03-06 19:49:58 +01:00
benpicco
dbe1270f66
Merge pull request #13568 from benpicco/cc2538-bsl.py-upstream
...
dist/tools/cc2538-bsl: use upstream version
2020-03-06 14:08:09 +01:00
benpicco
7877ffdf2a
Merge pull request #13511 from fjmolinas/pr_auto_init_periph
...
drivers/periph_common: add periph_init% modules
2020-03-06 13:05:57 +01:00
Francisco Molina
6b6479e6e9
drivers/periph_common: add periph_init% module
2020-03-06 11:21:19 +01:00
Benjamin Valentin
ed4d871835
dist/tools/cc2538-bsl: use upstream version
...
Automatically fetch the upstream version of cc2538-bsl.py instead
of maintaining our own fork of the tool.
fixes #13566
2020-03-06 11:13:21 +01:00
ed316309c8
Merge pull request #11874 from kaspar030/ztimer
...
sys/ztimer: initial import
2020-03-06 09:46:27 +01:00
Martine Lenders
ff425576a0
slipdev_stdio: provide stdio multiplexing over SLIP
2020-03-06 08:58:45 +01:00
benpicco
7af046d740
Merge pull request #13548 from benpicco/sys/auto_init/netif-manual
...
sys/auto_init: allow delayed initialisation of SAUL & gnrc_netif
2020-03-05 17:05:02 +01:00
Jan Mohr
aa5ffe5a6d
drivers/lis2dh12: added interrupt function
2020-03-04 17:01:58 +01:00
Benjamin Valentin
521b1ce440
sys/auto_init: allow delayed initialisation of SAUL
...
Co-authored-by: Martine S. Lenders <m.lenders@fu-berlin.de>
2020-03-04 16:13:40 +01:00
Benjamin Valentin
d765098d72
sys/auto_init: allow delayed initialisation of gnrc_netif
...
Co-authored-by: Martine S. Lenders <m.lenders@fu-berlin.de>
2020-03-04 16:13:40 +01:00
6dd79366bb
sys: add ztimer subsystem
...
Co-authored-by: Joakim Nohlgård <joakim.nohlgard@eistec.se>
2020-03-04 12:44:02 +01:00
95d607b54d
Merge pull request #13480 from aabadie/pr/tools/openocd_export_variables
...
tools/openocd: export configuration variables only to required targets
2020-03-03 18:16:05 +01:00
b7f5b18991
boards: don't export ROM_OFFSET variable
2020-03-03 14:18:03 +01:00
1df314d25e
makefiles/openocd-adapters: don't export OPENOCD_ADAPTER_INIT
2020-03-03 11:42:20 +01:00
54dbb5fce0
makefiles/openocd: export OPENOCD_ADAPTER_INIT to required target
2020-03-03 11:42:20 +01:00
f1ba22534a
boards: don't export globally OPENOCD_RESET_USE...
2020-03-03 11:42:19 +01:00
5ba95ed857
makefiles/openocd: export OPENOCD_RESET_USE... to required targets
2020-03-03 11:42:19 +01:00
Benjamin Valentin
b18b8e4f77
makefiles/color: fix build on NixOS
...
On NixOS, there is no `/bin/echo`, instead
`which echo` will return
/home/benpicco/.nix-profile/bin/echo
so hard-coding the path will break here.
Use `/usr/bin/env` to get the path of `echo`.
This should be availiable on all systems at the same location.
2020-02-27 18:13:36 +01:00
ef8daaf7be
suit: remove moran-v4 version of the parser
...
Co-authored-by: Kaspar Schleiser <kaspar@schleiser.de>
2020-02-26 14:54:16 +01:00
benpicco
aa1c23d4bd
Merge pull request #11929 from fabian18/driver-at24cxxx-eeprom
...
Driver for AT24CXXX EEPROM
2020-02-25 18:16:45 +01:00
f451eb692c
Merge pull request #13452 from aabadie/pr/tools/openocd_config_export
...
tools/openocd: only export OPENOCD_CONFIG to required targets
2020-02-25 15:11:38 +01:00
785052e410
Merge pull request #13468 from aabadie/pr/tools/bossa_rework
...
tools/bossa: split between 1.8 and 1.9 versions
2020-02-25 13:32:38 +01:00
698d371140
makefiles/bossa: adapt Makefiles for bossa version
2020-02-25 11:49:10 +01:00
c7a3219ddb
make: remove useless export of TARGET_ARCH
2020-02-25 09:42:12 +01:00
fabian18
2c77ee4cab
drivers/at24cxxx: at24cxxx EEPROM driver
2020-02-24 14:00:25 +01:00
9363f077d6
boards: don't export globally OPENOCD_CONFIG
...
The variable is already exported to required target in openocd.inc.mk
2020-02-24 10:04:11 +01:00
03f4d383db
makefiles/openocd: export OPENOCD_CONFIG to required targets
2020-02-24 10:04:11 +01:00
Benjamin Valentin
e8d248648f
makefiles/sam0.inc.mk: fix detection of JLinkExe
...
`command -v` doesn't work for me, but `which` finds the correct JLinkExe.
2020-02-14 12:07:16 +01:00
Francisco Molina
ab9551840e
makefiles/pseudomodules.inc.mk: declare all auto_init_%
...
Declaring all auto_init_% modules as pseudomodules will allow
using auto_init_% modules as modules that can be disabled. This
will give a higher lever of granularity allowing users to not
disable the complete auto_init module but only some of them.
2020-02-12 16:51:18 +01:00
benpicco
bc6fb241a0
Merge pull request #13139 from francois-berder/mips-cflags
...
makefiles: arch: mips: Allow CFLAGS_DBG and CFLAGS_OPT to be overridden
2020-02-12 00:02:20 +01:00
986ff50b75
Merge pull request #13200 from fjmolinas/pr_buildtests_boardsdir
...
makefiles/info-global.inc.mk: reset BOARDSDIR
2020-02-11 16:51:03 +01:00
Francisco Molina
dd8e9ae627
makefiles/info-global.inc.mk: reset BOARDSDIR
2020-02-11 15:26:04 +01:00
c30df3cac9
Merge pull request #7572 from kaspar030/zptr
...
core: add pointer compression header
2020-02-11 15:25:24 +01:00
5dc32b14cc
sys: zptr: initial commit
...
Provides functionality to compress pointers from 32bit to 16bit if
possible.
2020-02-11 13:59:59 +01:00
Martine Lenders
ebb20f2d44
Merge pull request #13305 from miri64/gnrc_ipv6_ext_frag_stats/feat/initial
...
gnrc_ipv6_ext_frag: initial import of statistics module
2020-02-10 20:23:13 +01:00
Cenk Gündoğan
7459adda79
Merge pull request #13292 from leandrolanzieri/pr/makefile_base/module_simple_exp
...
makefiles: Use simple expansion for widely used variables
2020-02-07 12:02:04 +01:00
Martine S. Lenders
cf69e61289
gnrc_ipv6_ext_frag: initial import of statistics module
2020-02-06 13:48:42 +01:00
d6264f56c8
Merge pull request #13168 from fjmolinas/pr_iotlab_openocd
...
boards/iotlab: add DEBUG_ADAPTER_ID openocd
2020-02-05 11:30:11 +01:00
Leandro Lanzieri
fdff969695
makefiles/llvm.inc.mk: Use simple expansion for OBJCOPY and OBJDUMP
2020-02-04 15:22:07 +01:00
Leandro Lanzieri
a262ae4c57
makefiles/gnu.inc.mk: Use simple expansion for OBJCOPY and OBJDUMP
2020-02-04 15:21:24 +01:00
c2534ad8f3
core: turn panic.c into a submodule
2020-01-31 13:55:26 +01:00
b6703f41dc
core: turn kernel_init.c into core_init submodule
2020-01-31 13:52:13 +01:00
Benjamin Valentin
bd19a55804
boards: remove EDBG_DEVICE_TYPE
...
EDBG_DEVICE_TYPE is a property of the CPU, is should not be set
by every board individually.
2020-01-31 09:35:27 +01:00
Benjamin Valentin
baea542532
tools/edbg: update to latest upstream version
...
This version has changed the target names, so add a edbg-devices.inc.mk
to automatically select the right target.
2020-01-31 09:35:27 +01:00
Leandro Lanzieri
f716cb1d39
makefiles/kconfig: Allow to override SHOULD_RUN_KCONFIG
2020-01-30 17:42:42 +01:00
Gunar Schorcht
ddd7cb0a7d
Merge pull request #12898 from aabadie/pr/cpu/dependencies_cleanup
...
cpu: move cpu level dependencies in dedicated Makefile.dep files
2020-01-28 17:57:02 +01:00
e969b2fcd5
cpu/atmega_common: move common dependencies
2020-01-28 13:20:53 +01:00
Francisco Molina
8b9afc3fed
makefiles/dependencies_debug.inc.mk: add DEPENDENCY_DEBUG_SORT_VARS
...
Define DEPENDENCY_DEBUG_SORT_VARS that can be set as 1 so that
DEPS_DEBUG_VARS are sorted before saving to file.
2020-01-28 13:02:15 +01:00
Leandro Lanzieri
c5dfc7d16c
Merge pull request #13198 from fjmolinas/pr_fix_info_board_RIOTBASE
...
makefiles/boards.inc.mk: set RIOTBOARD
2020-01-27 09:57:45 +01:00
Francisco Molina
ff70ad377a
makefiles/boards.inc.mk: simply expand ALLBOARDS
...
We can't use memoized here since if we don't expand immediatly
the value for BOARDSDIR might change.
2020-01-24 17:59:48 +01:00
Francisco Molina
1f844fb99a
makefiles/boards.inc.mk: set RIOTBOARD
2020-01-24 14:45:24 +01:00
benpicco
231fb0ae7b
Merge pull request #13081 from aabadie/pr/make/mips_inc_cleanup
...
make/mips: cleanup include makefile
2020-01-24 14:19:47 +01:00
Jean Pierre Dudey
894a868851
uniflash.inc.mk: add CCS_PATH variable.
...
This is used now to set the `DEBUGSSERVER` as the `gdb_agent_console`
file was removed from UniFlash.
Signed-off-by: Jean Pierre Dudey <jeandudey@hotmail.com>
2020-01-20 08:14:52 -05:00
Jean Pierre Dudey
727dd05840
uniflash.inc.mk: remove export from UNIFLASH_PATH
...
Signed-off-by: Jean Pierre Dudey <jeandudey@hotmail.com>
2020-01-20 08:11:46 -05:00
Francisco Molina
8cba8bdb16
makefiles/tools/openocd-adapters: add iotlab-usb
2020-01-19 20:24:55 +01:00
Sebastian Meiling
48fbd446fe
Merge pull request #8796 from miri64/dhcpv6c-pd/feat/initial
...
dhcpv6: Initial implementation of a client (with IA_PD support)
2020-01-16 13:32:51 +01:00
Martine Lenders
15c828cf92
gnrc_dhcpv6_client: provide GNRC-specific DHCPv6 parts
2020-01-16 12:36:10 +01:00
Martine Lenders
1048d67c76
dhcpv6: provide initial client implementation
...
This implements a client for DHCPv6 IA_PD (Identity Association for
Prefix Delegation). Goal was to have a IETF-compliant alternative to
UHCP. The implementation was based on RFC 8415.
2020-01-16 12:36:03 +01:00
Francois Berder
10939f2a57
makefiles: arch: mips: Allow CFLAGS_DBG and CFLAGS_OPT to be overridden
...
Signed-off-by: Francois Berder <18538310+francois-berder@users.noreply.github.com>
2020-01-15 22:00:58 +00:00
Hauke Petersen
8b408fc828
Merge pull request #12724 from aabadie/pr/stdio_rtt_blacklist
...
make: improve handling of the stdio_rtt module, improve dependency management at application level
2020-01-15 10:12:13 +01:00
Francisco
330d9dffc6
Merge pull request #12977 from leandrolanzieri/pr/makefiles/kconfig_only_when_needed
...
makefiles/kconfig: Only run Kconfig if it could generate configurations
2020-01-14 11:28:34 +01:00
57d5a1db1c
boards: provide stdio_rtt as default module where required
...
For the moment, hamilton, ruuvitag and thingy52 use stdio_rtt by default.
2020-01-14 07:48:08 +01:00
e5992e2fcf
Merge pull request #12307 from fjmolinas/pr_riotboot_booloader
...
riotboot: add RIOTBOOT_BUILD make var
2020-01-13 14:19:03 +01:00
9de6047097
dist/tools: add support for flatc compiler
2020-01-13 09:41:22 +01:00
benpicco
1c148ba2f2
Merge pull request #10092 from gschorcht/drivers_itg320x
...
drivers: add driver for InvenSense ITG-320X 3-axis gyroscope
2020-01-11 17:37:48 +01:00
Schorcht
71772cc3b3
drivers: add driver for ITG320X 3-axis gyroscope
2020-01-11 08:02:34 +01:00
b56827323c
make/mips: cleanup include makefile
...
Remove a useless export of the ABI variable, fix indentation
2020-01-10 15:08:12 +01:00
Francisco Molina
aa5c6173eb
makefiles/boot/riotboot.mk: exclude if RIOTBOOT_BUILD is set
...
- riotboot targets should not be needed for riotboot application
so dont include it.
- also fixes #12003 by not setting FLASHFILE = $(RIOTBOOT_EXTENDED_BIN)
when compiling riotboot application
2020-01-10 11:44:04 +01:00
Francisco Molina
4b8d776576
makefiles/cflags.inc.mk: set unless deactivated
...
`fdiagnostics-color` defaults to on only on a color capable terminal,
so it can be activated unles CC_NOCOLOR=1.
2020-01-10 08:58:54 +01:00
Francisco Molina
b1ca4597ef
makefiles/color.inc.mk: don't set CC_NOCOLOR
...
If CC_NOCOLOR was not set by the user it was set according to the
terminal support of colored output.
But since CC_NOCOLOR is also used to set `-fdiagnostics-color` flags
this means changing `CFLAGS` according to terminal support of colored
output.
This is not needed for `-fdiagnostics-color` since this option is by
default `auto` if the compiler supports colored output, and `auto`
means it will only use color when standard error is a terminal.
2020-01-10 08:58:54 +01:00
Francisco
421d174f60
Merge pull request #13023 from leandrolanzieri/pr/makefiles/kconfig/fix_autoheader_win
...
makefiles/kconfig: Change autoconf.h comment style
2020-01-07 09:11:05 +01:00
Leandro Lanzieri
e88254e52a
makefiles/kconfig: Escape comment in autoconf.h for Windows
...
In Windows setups using MSYS environment variables which start with a
slash get the 'root path' added. This adds a second slash to the content
of KCONFIG_AUTOHEADER_HEADER, so the first one is escaped when building
on those platforms.
2020-01-05 20:45:14 +01:00
ff00097992
cpu/cortexm: cleanup cortexm.inc.mk
...
- fix indent
- remove unnecessary exports
2020-01-03 14:19:48 +01:00
Francisco
d4c3476669
Merge pull request #12944 from leandrolanzieri/pr/kconfig_migrate/net/sock_util
...
Kconfig: Expose net/sock/util configurations
2020-01-03 11:41:20 +01:00
Francisco
45b2cca14f
Merge pull request #13018 from aabadie/pr/make/linkflags_remove_exports
...
make: remove use of export with LINKFLAGS variable
2020-01-02 16:37:04 +01:00
df376aeef7
make/cortexm: fix mfpu flag for CortexM7
...
Use single precision, like with M4 instead of double precision
2020-01-02 14:40:50 +01:00
857019769f
make/newlib: remove use of export for LINKFLAGS
2020-01-02 09:51:40 +01:00
7c121000ce
make/riscv: remove use of export for LINKFLAGS
2020-01-02 09:51:20 +01:00
b664de5593
make/msp430: remove use of export for LINKFLAGS
2020-01-02 09:50:55 +01:00
1e8528d6e8
cpu/mips: remove use of export for LINKFLAGS
2020-01-02 09:48:46 +01:00
68210feb54
Merge pull request #12972 from fjmolinas/pr_boardsdir_riotboard
...
Makefile.include: default to RIOTBOARD when BOARD not in BOARDSDIR
2019-12-31 10:51:27 +01:00
Francisco Molina
cacdd56348
makefiles/info-global.inc.mk: RIOTBOAR as BOARDSDIR fallback
2019-12-30 17:15:08 +01:00
Francisco Molina
18444ac99a
makefiles/boards.inc.mk: include BOARDSDIR and RIOTBOARD
2019-12-30 17:14:20 +01:00
Cenk Gündoğan
0d9d496618
Merge pull request #12913 from leandrolanzieri/pr/kconfig_include_config
...
makefiles/kconfig: Include configuration symbols to build system
2019-12-19 16:04:05 +01:00
Leandro Lanzieri
707ad8d083
makefiles/kconfig: Include configuration symbols
...
If the generated configuration file is present include it. That way one
can check if certain symbols are being configured using Kconfig.
2019-12-19 15:35:21 +01:00
